Contact us to receive an offer.
| Manufacturer | ENGEL |
|---|---|
| Model | Victory 1800 H 500 W300 Combi |
| Year | 2010 |
| Location | Germany
|
This listing features an ENGEL Victory 1800 H 500 W300 Combi horizontal injection moulding machine, manufactured in 2010. It is designed for processing thermoplastic (TP) and liquid silicone rubber (LSR) materials. The machine includes two injection units: the primary unit has a screw diameter of 70 mm with an injection volume of 1,039 cm³, while the secondary unit has a screw diameter of 35 mm and an injection volume of 192 cm³. Both units are equipped with centring rings of 160 mm diameter. The primary injection unit features 48 heating zones and a two-fold pneumatic shut-off nozzle control. The spacing between the injection units is 200 mm.
The clamping unit offers a maximum clamping force of 3,000 kN (300 tons) and platen dimensions of 1,200 mm by 1,180 mm. Mould installation height ranges from a minimum of 550 mm to a maximum of 1,450 mm. The machine includes two core pulls on the fixed platen side and four on the moving platen side, along with sliding jaw monitoring for enhanced operational safety. Control is managed via the CC 200 system.
The machine weighs approximately 21,200 kg. It is noted that the proportional valve is missing on this unit. Additionally, the system does not include temperature control units or dosing systems. A Viper 60-load integrated removal handling robot is included, weighing about 100 kg.
From the images, the machine is large and painted green, with a transparent safety cover and multiple warning labels for safety compliance. A control panel featuring buttons and a display screen is mounted on the side. Multiple access panels and ventilation grilles are present on the machine body, and instruction or maintenance documents are attached in a plastic holder.
This comprehensive setup is suitable for complex injection moulding applications requiring dual injection units and high clamping force.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Specification: Horizontal injection moulding machine,
TP/LSR (liquid silicone)
Serial no:
Injection unit 1:
- Screw diameter: 70 mm
- Injection volume: 1,039 cm³
- Heating zones FAP: 48
- Shut-off nozzle control: 2-fold pneumatic
- Centring ring diameter FAP: 160 mm
- Unit spacing: 200 mm
Injection unit 2:
- Screw diameter: 35 mm
- Injection volume: 192 cm³
- Centring ring diameter FAP: 160 mm
Clamping unit:
- Clamping force max.: 3,000 kN
- Clamping platens: 1,200 x 1,180 mm
- Mould installation height min.: 550 mm
- Mould installation height max.: 1,450 mm
- Number of core pulls FAP: 2
- Number of core pulls BAP: 4
- Sliding jaw monitoring: Yes
- Control system: CC 200
- Weight approx.: 21,200 kg
Proportional valve missing!
Removal handling/robot: Viper 60-load integrated
- Weight approx.: 100 kg
All systems without temperature control units, dosing systems, etc.
Further TP or TP/TPE injection moulding machines under
Plastic injection moulding machines
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this ENGEL ES 200V/45 VT-Elast manufactured?
This ENGEL ES 200V/45 VT-Elast injection molding machine was manufactured in 2001.
What type of dosing system does the machine have?
This injection molding machine is equipped with a silicone dosing system.
Is this ENGEL ES 200V/45 VT-Elast suitable for LSR?
This ENGEL ES 200V/45 VT-Elast machine is not designed for LSR (liquid silicone).
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 32 |
| Last activity | Nov. 9, 2026 |
Specification: Horizontal injection moulding machine,
TP/LSR (liquid silicone)
Serial no:
Injection unit 1:
- Screw diameter: 70 mm
- Injection volume: 1,039 cm³
- Heating zones FAP: 48
- Shut-off nozzle control: 2-fold pneumatic
- Centring ring diameter FAP: 160 mm
- Unit spacing: 200 mm
Injection unit 2:
- Screw diameter: 35 mm
- Injection volume: 192 cm³
- Centring ring diameter FAP: 160 mm
Clamping unit:
- Clamping force max.: 3,000 kN
- Clamping platens: 1,200 x 1,180 mm
- Mould installation height min.: 550 mm
- Mould installation height max.: 1,450 mm
- Number of core pulls FAP: 2
- Number of core pulls BAP: 4
- Sliding jaw monitoring: Yes
- Control system: CC 200
- Weight approx.: 21,200 kg
Proportional valve missing!
Removal handling/robot: Viper 60-load integrated
- Weight approx.: 100 kg
All systems without temperature control units, dosing systems, etc.
Further TP or TP/TPE injection moulding machines under
Plastic injection moulding machines
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this ENGEL ES 200V/45 VT-Elast manufactured?
This ENGEL ES 200V/45 VT-Elast injection molding machine was manufactured in 2001.
What type of dosing system does the machine have?
This injection molding machine is equipped with a silicone dosing system.
Is this ENGEL ES 200V/45 VT-Elast suitable for LSR?
This ENGEL ES 200V/45 VT-Elast machine is not designed for LSR (liquid silicone).
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing features an ENGEL Victory 1800 H 500 W300 Combi horizontal injection moulding machine, manufactured in 2010. It is designed for processing thermoplastic (TP) and liquid silicone rubber (LSR) materials. The machine includes two injection units: the primary unit has a screw diameter of 70 mm with an injection volume of 1,039 cm³, while the secondary unit has a screw diameter of 35 mm and an injection volume of 192 cm³. Both units are equipped with centring rings of 160 mm diameter. The primary injection unit features 48 heating zones and a two-fold pneumatic shut-off nozzle control. The spacing between the injection units is 200 mm.
The clamping unit offers a maximum clamping force of 3,000 kN (300 tons) and platen dimensions of 1,200 mm by 1,180 mm. Mould installation height ranges from a minimum of 550 mm to a maximum of 1,450 mm. The machine includes two core pulls on the fixed platen side and four on the moving platen side, along with sliding jaw monitoring for enhanced operational safety. Control is managed via the CC 200 system.
The machine weighs approximately 21,200 kg. It is noted that the proportional valve is missing on this unit. Additionally, the system does not include temperature control units or dosing systems. A Viper 60-load integrated removal handling robot is included, weighing about 100 kg.
From the images, the machine is large and painted green, with a transparent safety cover and multiple warning labels for safety compliance. A control panel featuring buttons and a display screen is mounted on the side. Multiple access panels and ventilation grilles are present on the machine body, and instruction or maintenance documents are attached in a plastic holder.
This comprehensive setup is suitable for complex injection moulding applications requiring dual injection units and high clamping force.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 32 |
| Last activity | Nov. 9, 2026 |
Използвана машина за шприцване ENGEL Victory 1800 H 500 W300 Combi
Použitý vstřikovací stroj ENGEL Victory 1800 H 500 W300 Combi
Brugt ENGEL Victory 1800 H 500 W300 Combi sprøjtestøbemaskine
Gebrauchte ENGEL Victory 1800 H 500 W300 Combi Spritzgießmaschine
Μεταχειρισμένη μηχανή χύτευσης με έγχυση ENGEL Victory 1800 H 500 W300 Combi
Used ENGEL Victory 1800 H 500 W300 Combi Injection moulding machine
Usada ENGEL Victory 1800 H 500 W300 Combi Máquina de moldeo por inyección
Machine à injecter ENGEL Victory 1800 H 500 W300 Combi d'occasion
Rabljeni ENGEL Victory 1800 H 500 W300 Combi Stroj za injekcijsko prešanje
Használt ENGEL Victory 1800 H 500 W300 Combi fröccsöntő gép
Pressa ad iniezione ENGEL Victory 1800 H 500 W300 Combi
Naudota ENGEL Victory 1800 H 500 W300 Combi įpurškimo liejimo mašina
Gebruikte ENGEL Victory 1800 H 500 W300 Combi spuitgietmachine
Używana wtryskarka ENGEL Victory 1800 H 500 W300 Combi
Usado Máquina de moldagem por injeção ENGEL Victory 1800 H 500 W300 Combi
Mașină de turnare prin injecție ENGEL Victory 1800 H 500 W300 Combi
Подержанная машина для литья под давлением ENGEL Victory 1800 H 500 W300 Combi
Polovne ENGEL Victori 1800 H 500 V300 Combi mašina za brizganje
Begagnad ENGEL Victory 1800 H 500 W300 Combi Formsprutningsmaskin
Kullanılmış ENGEL Victory 1800 H 500 W300 Combi Enjeksiyon kalıplama makinesi
EN
- Languages
English (GB)