| Manufacturer | Engel |
|---|---|
| Model | e-victory 1640/260 |
| Year | 2015 |
| Location | Germany
|
Manufacturer: Engel
Model: e-victory 1640/260
Year of manufacture: 2015
Machine type: All-electric injection moulding machine (tiebarless)
Condition: as-is, where-is
Overview:
This Engel e-victory 1640/260 is an electric, tiebarless injection moulding machine configured for high-performance production. It is equipped with an ENGEL CC300 control (21.5" Full HD touchscreen) and an ENGEL ECODRIVE SHV1 hydraulic system with one demand-regulated servo pump.
Clamping and injection:
- Clamping system: Tiebarless ENGEL clamping system
- Clamping force: 2600 kN
- Injection unit: 1640
- Injection system: Servo-electric, high execution
- L/D ratio: 24
- Centering: 160 mm
Utilities and electrical:
- Electrical connection: 3 x 400 V + N + PE, 50 Hz
- Nominal connected load: approx. 164 kW
Mold and process interfaces:
- Hydraulic core pulls: 2 on the moving platen, 2 on the stationary platen
- Vacuum/compressed air circuits: 8 on the stationary platen with Venturi nozzles and pressure switches
- Pneumatic mold valve control: 2-fold FESTO, up to 16 bar
- Mold heating: 16 control zones, max heating power 25 kW
- Nozzle radius: 15 mm
- Nozzle bore: 4 mm
- Nozzle contact stroke: approx. 405 mm
Auxiliary systems and controls:
- Robot interface: Euromap 67 / AN-146
- Control languages: Czech and German
Additional equipment included:
- Complete MuCell Basic Package
- PM cold-work steel screw Ø 60 mm (screw diameter listed as 60 mm)
- Hydraulic needle shut-off nozzle
- Melt pressure sensor
- Trexel auxiliary equipment: SII VC 30, MIK 1060 SII
- Frame for two 50 L gas cylinders
- Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total)
- GEKU automation with conveyor belts
Physical data:
- Machine length: 8780 mm
- Machine weight: 22,300 kg
- Screw diameter: 60 mm
Notes:
This description reflects the supplied technical specification and additional equipment. No operational status, testing, refurbishment, or warranty is claimed beyond the stated “as-is, where-is” condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: Engel
Model: e-victory 1640/260
Year of manufacture: 2015
Machine type: Electric injection moulding machine
Clamping system: Tiebarless ENGEL clamping system
Clamping force: 2600 kN
Injection unit: 1640
Injection system: Servo-electric, high execution
L/D ratio: 24
Control unit: ENGEL CC300 (21.5" Full HD touchscreen)
Control brand: ENGEL
Electrical connection: 3 x 400 V + N + PE, 50 Hz
Nominal connected load: approx. 164 kW
Centering: 160 mm
Hydraulic core pulls: 2 on moving platen, 2 on stationary platen
Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches
Pneumatic mold valve control: 2-fold FESTO, up to 16 bar
Mold heating: 16 control zones, max heating power 25 kW
Nozzle radius: 15 mm
Nozzle bore: 4 mm
Nozzle contact stroke: approx. 405 mm
Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l
Robot interface: Euromap 67 / AN-146
Languages: Czech and German
Additional equipment: MuCell package: Complete MuCell Basic Package
PM cold-work steel screw Ø 60 mm
Hydraulic needle shut-off nozzle
Melt pressure sensor
Trexel auxiliary equipment: SII VC 30, MIK 1060 SII
Frame for two 50 L gas cylinders
Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total)
GEKU automation with conveyor belts
Machine length: 8780 mm
Machine weight: 22300 kg
Screw diameter: 60 mm
Condition: as-is, where-is
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2053 |
| Last activity | Nov. 6, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Manufacturer: Engel
Model: e-victory 1640/260
Year of manufacture: 2015
Machine type: Electric injection moulding machine
Clamping system: Tiebarless ENGEL clamping system
Clamping force: 2600 kN
Injection unit: 1640
Injection system: Servo-electric, high execution
L/D ratio: 24
Control unit: ENGEL CC300 (21.5" Full HD touchscreen)
Control brand: ENGEL
Electrical connection: 3 x 400 V + N + PE, 50 Hz
Nominal connected load: approx. 164 kW
Centering: 160 mm
Hydraulic core pulls: 2 on moving platen, 2 on stationary platen
Vacuum/compressed air circuits: 8 on stationary platen with Venturi nozzles and pressure switches
Pneumatic mold valve control: 2-fold FESTO, up to 16 bar
Mold heating: 16 control zones, max heating power 25 kW
Nozzle radius: 15 mm
Nozzle bore: 4 mm
Nozzle contact stroke: approx. 405 mm
Hydraulic tank capacity: Main tank approx. 490 l, suction tank approx. 220 l
Robot interface: Euromap 67 / AN-146
Languages: Czech and German
Additional equipment: MuCell package: Complete MuCell Basic Package
PM cold-work steel screw Ø 60 mm
Hydraulic needle shut-off nozzle
Melt pressure sensor
Trexel auxiliary equipment: SII VC 30, MIK 1060 SII
Frame for two 50 L gas cylinders
Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total)
GEKU automation with conveyor belts
Machine length: 8780 mm
Machine weight: 22300 kg
Screw diameter: 60 mm
Condition: as-is, where-is
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: Engel
Model: e-victory 1640/260
Year of manufacture: 2015
Machine type: All-electric injection moulding machine (tiebarless)
Condition: as-is, where-is
Overview:
This Engel e-victory 1640/260 is an electric, tiebarless injection moulding machine configured for high-performance production. It is equipped with an ENGEL CC300 control (21.5" Full HD touchscreen) and an ENGEL ECODRIVE SHV1 hydraulic system with one demand-regulated servo pump.
Clamping and injection:
- Clamping system: Tiebarless ENGEL clamping system
- Clamping force: 2600 kN
- Injection unit: 1640
- Injection system: Servo-electric, high execution
- L/D ratio: 24
- Centering: 160 mm
Utilities and electrical:
- Electrical connection: 3 x 400 V + N + PE, 50 Hz
- Nominal connected load: approx. 164 kW
Mold and process interfaces:
- Hydraulic core pulls: 2 on the moving platen, 2 on the stationary platen
- Vacuum/compressed air circuits: 8 on the stationary platen with Venturi nozzles and pressure switches
- Pneumatic mold valve control: 2-fold FESTO, up to 16 bar
- Mold heating: 16 control zones, max heating power 25 kW
- Nozzle radius: 15 mm
- Nozzle bore: 4 mm
- Nozzle contact stroke: approx. 405 mm
Auxiliary systems and controls:
- Robot interface: Euromap 67 / AN-146
- Control languages: Czech and German
Additional equipment included:
- Complete MuCell Basic Package
- PM cold-work steel screw Ø 60 mm (screw diameter listed as 60 mm)
- Hydraulic needle shut-off nozzle
- Melt pressure sensor
- Trexel auxiliary equipment: SII VC 30, MIK 1060 SII
- Frame for two 50 L gas cylinders
- Mold temperature control: 3 ENGEL flomo distributors (24 monitored circuits total)
- GEKU automation with conveyor belts
Physical data:
- Machine length: 8780 mm
- Machine weight: 22,300 kg
- Screw diameter: 60 mm
Notes:
This description reflects the supplied technical specification and additional equipment. No operational status, testing, refurbishment, or warranty is claimed beyond the stated “as-is, where-is” condition.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2053 |
| Last activity | Nov. 6, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Електрическа шприцмашина Engel e-victory 1640/260
Elektrický vstřikovací lis Engel e-victory 1640/260
Engel e-victory 1640/260 Elektrisk sprøjtestøbemaskine
Engel e-victory 1640/260 Elektrische Spritzgießmaschine
Ηλεκτρική πρέσα έγχυσης Engel e-victory 1640/260
Engel e-victory 1640/260 Electric injection moulding machine
Inyectora eléctrica Engel e-victory 1640/260
Presse à injecter électrique Engel e-victory 1640/260
Električni stroj za injekcijsko prešanje Engel e-victory 1640/260
Engel e-victory 1640/260 Elektromos fröccsöntőgép
Pressa a iniezione elettrica Engel e-victory 1640/260
Engel e-victory 1640/260 Elektrinės įpurškimo liejimo staklės
Engel e-victory 1640/260 Elektrische spuitgietmachine
Wtryskarka elektryczna Engel e-victory 1640/260
Injetora elétrica Engel e-victory 1640/260
Mașină electrică de injectat Engel e-victory 1640/260
Engel e-victory 1640/260 Электрический термопластавтомат
Električna mašina za injekciono prešanje Engel e-victory 1640/260
Engel e-victory 1640/260 Elektrisk formsprutningsmaskin
Elektrikli enjeksiyon makinesi Engel e-victory 1640/260
EN
- Languages
English (GB)