Contact us to receive an offer.
| Manufacturer | Engel |
|---|---|
| Model | e-motion EM 200/55 |
| Year | 2006 |
| Location | Poland
|
This Engel e-motion EM 200/55 injection molding machine, manufactured in 2006, offers a clamping force of 55 tons and features a screw diameter of 25 mm. The machine is equipped with the CC200 control system and comes with preloaded German and English language options. It has platen dimensions of 620 x 500 mm and supports mold heights ranging from 150 to 350 mm. The installed power rating is 22 kW.
The machine is designed to operate both with and without robotic assistance, and there is an option to purchase it together with additional tooling, including a Kuka robot adapted for integration with this unit.
The exterior of the machine shows signs of prior use, including some dirt, but no visible damage. Its main control panel, located on the right side, features a display and multiple buttons, while a secondary smaller control panel with display and buttons is positioned on the left side. A coiled blue air hose is attached beneath the machine.
Inside, the mold mounting plates and platen area are visible, showing some surface rust and wear but no structural damage. The interior includes organized wiring, tubing, hydraulic or pneumatic lines, and connectors, all appearing intact without visible damage. The metal diamond plate floor beneath the platen shows wear consistent with use.
The rear or side of the machine houses the electrical cabinet with multiple power sockets, an emergency stop button, and electrical hazard warning labels. The cabinet surface shows minor dirt but no damage. Additional safety signs for electrical hazards are clearly displayed on control panels and cabinet doors.
Overall, this Engel injection molding machine is a robust and versatile unit suitable for various production needs, with comprehensive control options and the capability to integrate robotic automation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Injection molding machine in very good technical condition, since new under the supervision of the manufacturer's service. The machine has German and English language preloaded.
Short circuit force: 55 t
Screw diameter: 25 mm
Plate dimensions: 620x500 mm
Mold height: 150-350 mm
Control: CC200
Year of production: 2006
Installed power: 22 kW
The machine has the ability to work with a robot and without a robot.
Possibility to sell with additional tooling - Kuka robot adapted to work with the machine
On request, the possibility to send videos of the work of the machine.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the clamping force of this Engel e-motion EM 200/55?
This Engel e-motion EM 200/55 injection molding machine has a clamping force of 55 tons.
What is the screw diameter of the machine?
This Engel e-motion EM 200/55 injection molding machine features a screw diameter of 25 mm.
What are the plate dimensions of this EM 200/55 injection molding machine?
This Engel e-motion EM 200/55 injection molding machine has plate dimensions of 620x500 mm.
What is the mold height range for this machine?
This Engel e-motion EM 200/55 injection molding machine supports a mold height range of 150-350 mm.
What type of control does this Engel e-motion EM 200/55 have?
This Engel e-motion EM 200/55 injection molding machine is equipped with CC200 control.
When was this Engel e-motion EM 200/55 manufactured?
This Engel e-motion EM 200/55 injection molding machine was produced in 2006.
What is the installed power of the machine?
This Engel e-motion EM 200/55 injection molding machine has an installed power of 22 kW.
How many operating hours does this machine have?
This Engel e-motion EM 200/55 injection molding machine has a total of 72273.7 hours of operation.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 2 |
| Last activity | Oct. 15, 2026 |
Injection molding machine in very good technical condition, since new under the supervision of the manufacturer's service. The machine has German and English language preloaded.
Short circuit force: 55 t
Screw diameter: 25 mm
Plate dimensions: 620x500 mm
Mold height: 150-350 mm
Control: CC200
Year of production: 2006
Installed power: 22 kW
The machine has the ability to work with a robot and without a robot.
Possibility to sell with additional tooling - Kuka robot adapted to work with the machine
On request, the possibility to send videos of the work of the machine.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the clamping force of this Engel e-motion EM 200/55?
This Engel e-motion EM 200/55 injection molding machine has a clamping force of 55 tons.
What is the screw diameter of the machine?
This Engel e-motion EM 200/55 injection molding machine features a screw diameter of 25 mm.
What are the plate dimensions of this EM 200/55 injection molding machine?
This Engel e-motion EM 200/55 injection molding machine has plate dimensions of 620x500 mm.
What is the mold height range for this machine?
This Engel e-motion EM 200/55 injection molding machine supports a mold height range of 150-350 mm.
What type of control does this Engel e-motion EM 200/55 have?
This Engel e-motion EM 200/55 injection molding machine is equipped with CC200 control.
When was this Engel e-motion EM 200/55 manufactured?
This Engel e-motion EM 200/55 injection molding machine was produced in 2006.
What is the installed power of the machine?
This Engel e-motion EM 200/55 injection molding machine has an installed power of 22 kW.
How many operating hours does this machine have?
This Engel e-motion EM 200/55 injection molding machine has a total of 72273.7 hours of operation.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Engel e-motion EM 200/55 injection molding machine, manufactured in 2006, offers a clamping force of 55 tons and features a screw diameter of 25 mm. The machine is equipped with the CC200 control system and comes with preloaded German and English language options. It has platen dimensions of 620 x 500 mm and supports mold heights ranging from 150 to 350 mm. The installed power rating is 22 kW.
The machine is designed to operate both with and without robotic assistance, and there is an option to purchase it together with additional tooling, including a Kuka robot adapted for integration with this unit.
The exterior of the machine shows signs of prior use, including some dirt, but no visible damage. Its main control panel, located on the right side, features a display and multiple buttons, while a secondary smaller control panel with display and buttons is positioned on the left side. A coiled blue air hose is attached beneath the machine.
Inside, the mold mounting plates and platen area are visible, showing some surface rust and wear but no structural damage. The interior includes organized wiring, tubing, hydraulic or pneumatic lines, and connectors, all appearing intact without visible damage. The metal diamond plate floor beneath the platen shows wear consistent with use.
The rear or side of the machine houses the electrical cabinet with multiple power sockets, an emergency stop button, and electrical hazard warning labels. The cabinet surface shows minor dirt but no damage. Additional safety signs for electrical hazards are clearly displayed on control panels and cabinet doors.
Overall, this Engel injection molding machine is a robust and versatile unit suitable for various production needs, with comprehensive control options and the capability to integrate robotic automation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2024 |
| Offers online | 2 |
| Last activity | Oct. 15, 2026 |
Електрическа машина за леене под налягане Engel e-motion EM 200/55
Elektrický vstřikovací lis Engel e-motion EM 200/55
Engel e-motion EM 200/55 Elektrisk sprøjtestøbemaskine
Engel e-motion EM 200/55 Eine elektrische Spritzgießmaschine
Ηλεκτρική μηχανή χύτευσης με έγχυση Engel e-motion EM 200/55
Engel e-motion EM 200/55 Electric injection moulding machine
Inyectora de plástico eléctrica Engel e-motion EM 200/55
Presse à injecter électrique Engel e-motion EM 200/55
Električni stroj za brizganje Engel e-motion EM 200/55
Engel e-motion EM 200/55 Elektromos fröccsöntő gép
Pressa ad iniezione elettrica Engel e-motion EM 200/55
Elektrinė liejimo mašina Engel e-motion EM 200/55
Engel e-motion EM 200/55 Elektrische spuitgietmachine
Wtryskarka elektryczna Engel e-motion EM 200/55
Máquina de injecção elétrica Engel e-motion EM 200/55
Mașină electrică de turnat prin injecție Engel e-motion EM 200/55
Engel e-motion EM 200/55 Электрический станок для литья под давлением
Električna mašina za brizganje Engel e-motion EM 200/55
Engel e-motion EM 200/55 Elektrisk formsprutningsmaskin
Bütün elektrikli enjeksiyon kalıplama makinesi Engel e-motion EM 200/55
EN
- Languages
English (GB)