| Manufacturer | ENGEL |
|---|---|
| Model | DUO 11050 / 1500 |
| Year | 2008 |
| Location | Spain
|
ENGEL DUO 11050 / 1500 injection moulding machine, manufactured in 2008. The machine is shown installed in a factory and has green exterior panels with visible scuffs, scratches and worn paint. A Yushin take-out robot marked YA II-1300 is mounted above the machine. A conveyor, material hopper and flexible hoses are also visible in the installation; their inclusion in the sale is not specified. The machine has a Q.M.C. control panel and an illuminated touchscreen displaying a machine-control interface.
Technical specifications:
- Screw diameter: 120 mm
- Tie-bar spacing (H × V): 1,530 × 1,275 mm
- Platen dimensions (length × width): 2,200 × 1,990 mm
- Opening of the press / maximum distance between platens: 3,050 mm
- Maximum mold opening stroke: 2,350 mm
- Shot volume: 6,450 cm³
- Injection pressure: 2,020 bar
- Heating zones: 7
- Weight: 75,000 kg
Additional figures in the current technical data include a 570 mm screw stroke, 300 mm ejector stroke, 990 cm³/s injection rate, 145 g/s plasticizing capacity (PS), 1,800 l oil tank capacity and 130 kW pump motor power. The current listing also states a 700 mm minimum and 1,400 mm maximum mold height, and a 1,000 kN mold opening force. A technical data sheet is shown for the machine designation EMCN DUO 11050/1500. No documents are available according to the listing. Condition and operating status have not been stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
ENGEL
DUO 11050 / 1500
Technical Specifications
Video
Documentation
Screw diameter 120 mm
Max. mold height 1400 mm
Min. mold height 700 mm
Heating capacity 88 kW
Plasticizing capacity (PS) 145 g/s
Oil tank capacity 1800 l
Max. nozzle stroke / contact force 950 / 150 mm / kN
Max. mold opening stroke 2350 mm
Max. nozzle stroke 950 mm
Ejector stroke 300 mm
Screw stroke 570 mm
Injection rate 990 cm³/s
Platen dimensions (h x v) 2200 x 1990 mm
Tie-bar spacing (h x v) 1530 x 1275 mm
Max. distance between platens 3050 mm
Mold opening force 1000 kN
Clamping force 15000 kN
Ejector force 230 kN
Weight 75000 kg
Pump motor power 130 kW
Injection pressure 2020 bar
Screw L/D ratio 22
Dry cycle time 4.5 / 1100 sec/mm
Screw speed 120 rpm
Theoretical injection volume 6450 cm³
Heating zones 7
No documents available
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 28 |
| Last activity | Nov. 5, 2026 |
ENGEL
DUO 11050 / 1500
Technical Specifications
Video
Documentation
Screw diameter 120 mm
Max. mold height 1400 mm
Min. mold height 700 mm
Heating capacity 88 kW
Plasticizing capacity (PS) 145 g/s
Oil tank capacity 1800 l
Max. nozzle stroke / contact force 950 / 150 mm / kN
Max. mold opening stroke 2350 mm
Max. nozzle stroke 950 mm
Ejector stroke 300 mm
Screw stroke 570 mm
Injection rate 990 cm³/s
Platen dimensions (h x v) 2200 x 1990 mm
Tie-bar spacing (h x v) 1530 x 1275 mm
Max. distance between platens 3050 mm
Mold opening force 1000 kN
Clamping force 15000 kN
Ejector force 230 kN
Weight 75000 kg
Pump motor power 130 kW
Injection pressure 2020 bar
Screw L/D ratio 22
Dry cycle time 4.5 / 1100 sec/mm
Screw speed 120 rpm
Theoretical injection volume 6450 cm³
Heating zones 7
No documents available
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
ENGEL DUO 11050 / 1500 injection moulding machine, manufactured in 2008. The machine is shown installed in a factory and has green exterior panels with visible scuffs, scratches and worn paint. A Yushin take-out robot marked YA II-1300 is mounted above the machine. A conveyor, material hopper and flexible hoses are also visible in the installation; their inclusion in the sale is not specified. The machine has a Q.M.C. control panel and an illuminated touchscreen displaying a machine-control interface.
Technical specifications:
- Screw diameter: 120 mm
- Tie-bar spacing (H × V): 1,530 × 1,275 mm
- Platen dimensions (length × width): 2,200 × 1,990 mm
- Opening of the press / maximum distance between platens: 3,050 mm
- Maximum mold opening stroke: 2,350 mm
- Shot volume: 6,450 cm³
- Injection pressure: 2,020 bar
- Heating zones: 7
- Weight: 75,000 kg
Additional figures in the current technical data include a 570 mm screw stroke, 300 mm ejector stroke, 990 cm³/s injection rate, 145 g/s plasticizing capacity (PS), 1,800 l oil tank capacity and 130 kW pump motor power. The current listing also states a 700 mm minimum and 1,400 mm maximum mold height, and a 1,000 kN mold opening force. A technical data sheet is shown for the machine designation EMCN DUO 11050/1500. No documents are available according to the listing. Condition and operating status have not been stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 28 |
| Last activity | Nov. 5, 2026 |
Шприцмашина ENGEL DUO 11050 / 1500
Vstřikovací lis ENGEL DUO 11050 / 1500
ENGEL DUO 11050 / 1500 Sprøjtestøbemaskine
ENGEL DUO 11050 / 1500 Spritzgießmaschine
Πρέσα έγχυσης ENGEL DUO 11050 / 1500
ENGEL DUO 11050 / 1500 Injection moulding machine
Inyectora ENGEL DUO 11050 / 1500
Presse à injecter ENGEL DUO 11050 / 1500
Stroj za injekcijsko prešanje ENGEL DUO 11050 / 1500
ENGEL DUO 11050 / 1500 Fröccsöntőgép
Pressa a iniezione ENGEL DUO 11050 / 1500
ENGEL DUO 11050 / 1500 Įpurškimo liejimo staklės
ENGEL DUO 11050 / 1500 Spuitgietmachine
Wtryskarka ENGEL DUO 11050 / 1500
Injetora ENGEL DUO 11050 / 1500
Mașină de injectat ENGEL DUO 11050 / 1500
ENGEL DUO 11050 / 1500 Термопластавтомат
Mašina za injekciono prešanje ENGEL DUO 11050 / 1500
ENGEL DUO 11050 / 1500 Formsprutningsmaskin
Enjeksiyon makinesi ENGEL DUO 11050 / 1500
EN
- Languages
English (GB)