| Manufacturer | ELMAKSAN |
|---|---|
| Model | ELBK 2000 × 0.6–3 |
| Year | 2021 |
| Location | Turkey
|
Machine Description:
Longitudinal cutting line for processing cold-rolled and galvanized steel coils. Suitable for materials with thickness from 0.6 to 3 mm and width up to 2000 mm. Manufacturer/Model: ELMAKSAN / ELBK 2000 × 0.6–3.
Key Features and Configuration:
- Configured for continuous operation with rotary shear, automatic sheet stacking, and manual packing.
- Standard line flow: Uncoiler → Feeding and leveling section → Rotary shear → Exit conveyor → Automatic stacking → Manual packing.
Technical Parameters (by subsystems):
- Uncoiler: max coil weight 30 tons; inner diameter 510–610 mm; max outer diameter 2100 mm.
- Feeding and leveling system: continuous mode; automatic lubrication system; line direction on request.
- Rotary shear: cutting method – rotary shear; accuracies: diagonal cut ±1 mm, length tolerance ±1 mm; cutting reference – line center; cutting length 500–6000 mm. Note: shear block is fixed (not flying), designed for continuous operation.
- Automatic stacking system: package size from 400×500 mm to 2000×6000 mm; package height 450 mm; max package weight 10 tons; automatic side and end alignment.
- Manual packing area: manual method; conveyor length 6000 mm; compatible with crane/forklift.
Operational Characteristics and Energy:
- Maximum line speed up to 70 m/min (adjustable ±10%).
- Maximum strip width 2000 mm; minimum 400 mm.
- Control: Mitsubishi PLC.
- Total installed power approx. 100 kW; max hydraulic pressure 100 kg/cm²; air pressure 5–8 kg/cm²; air consumption 1000 l/min.
Layout and Weight:
- Required area approximately 24 m × 6 m; height about 3 m; total line weight about 50 tons.
Materials and Mechanical Characteristics:
- Designed for cold-rolled and galvanized steel.
- Maximum tensile strength 42 kg/mm²; yield strength 36 kg/mm².
Condition:
- The original description states the machine is installed. Additional information on operational condition or service records is not included here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Cut-to-length line for processing cold rolled and galvanized steel coils from 0.6 to 3 mm thickness and up to 2000 mm width. Equipped with a rotary shear cutting system, continuous operation, automatic sheet stacking and manual packing. Installed and in working condition.
This cut-to-length line is designed for high-speed and precise processing of thin gauge steel coils, including cold rolled and galvanized materials. The rotary shear cutting system allows continuous production at speeds up to 70 m/min, while maintaining ±1 mm cutting tolerance. The automatic stacking system ensures orderly and accurate sheet stacking, while manual packing provides operational flexibility and reduced investment cost.
With Mitsubishi PLC automation, compact layout, and reliable mechanical design, the line is an ideal solution for steel service centers focused on productivity and consistency. The machine is installed, fully operational, and available for inspection. 🔷 GENERAL INFORMATION Parameter Specification Line type Cut-to-Length Line
Manufacturer/Model ELMAKSAN / ELBK 2000 × 0.6–3 Material Cold rolled & galvanized steel Thickness range 0.6 – 3 mm Max. strip width 2000 mm Max. coil weight 30 tons Max. tensile strength 42 kg/mm² Yield strength 36 kg/mm²
Condition Installed & running ________________________________________ 🔷 LINE CONFIGURATION Uncoiler → Feeding & Straightening Section → Rotary Shear → Outfeed Conveyor → Automatic Stacking → Manual Packing ________________________________________ 🔷 UNIT-BY-UNIT TECHNICAL SPECIFICATIONS ________________________________________
1️⃣ UNCOILER Parameter Specification Max. coil weight 30 tons Coil inner diameter 510 – 610 mm Max. coil outer diameter 2100 mm ________________________________________ 2️⃣ FEEDING & STRAIGHTENING SYSTEM Parameter Specification Operation mode Continuous
Lubrication Automatic grease system Line direction As required Function: Ensures stable strip feeding and strip flatness prior to cutting, contributing to high cutting accuracy and surface quality. ________________________________________ 3️⃣ ROTARY SHEAR (CUTTING UNIT) Parameter Specification Cutting method Rotary shear
Diagonal cutting accuracy ±1 mm Cutting length tolerance ±1 mm Cutting reference Line center Max. cutting length 6000 mm Min. cutting length 500 mm Note: Rotary shear enables continuous cutting without stopping the line. The shear unit itself is stationary (non-flying).
________________________________________ 4️⃣ AUTOMATIC STACKING SYSTEM Parameter Specification Stack dimensions 400 × 500 mm up to 2000 × 6000 mm Stack height 450 mm Max. stack weight 10 tons Alignment Automatic side & end alignment Operation Automatic ________________________________________
5️⃣ MANUAL PACKING AREA Parameter Specification Packing method Manual Conveyor length 6000 mm Handling Crane / forklift compatible ________________________________________ 🔷 LINE PERFORMANCE Parameter Specification Max. line speed Up to 70 m/min (±10% adjustable)
Max. strip width 2000 mm Min. strip width 400 mm ________________________________________ 🔷 ELECTRICAL & AUTOMATION Parameter Specification Control system Mitsubishi PLC Total installed power Approx. 100 kW Max. hydraulic pressure 100 kg/cm²
Air pressure 5–8 kg/cm² Air consumption 1000 L/min ________________________________________ 🔷 LAYOUT & WEIGHT Parameter Specification Required space Approx. 24 m × 6 m Line height Approx. 3 m Total line weight Approx. 50 tons
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the cutting thickness range of this longitudinal cutting line?
This longitudinal cutting line has a cutting thickness range of 0.6 to 3 mm.
What is the cutting length of this equipment?
This equipment has a cutting length of 2000 mm.
What is the capacity of this machine?
This machine has a capacity of 30 tons.
What type of equipment is this?
This equipment is a rotary shear.
Does this longitudinal cutting line have automatic stacking?
This longitudinal cutting line features automatic stacking.
When was the unit installed?
The unit was installed in 2021.
Is this machine operational and available for inspection?
This machine is operational and can be inspected under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2025 |
| Offers online | 6 |
| Last activity | Oct. 15, 2026 |
Cut-to-length line for processing cold rolled and galvanized steel coils from 0.6 to 3 mm thickness and up to 2000 mm width. Equipped with a rotary shear cutting system, continuous operation, automatic sheet stacking and manual packing. Installed and in working condition.
This cut-to-length line is designed for high-speed and precise processing of thin gauge steel coils, including cold rolled and galvanized materials. The rotary shear cutting system allows continuous production at speeds up to 70 m/min, while maintaining ±1 mm cutting tolerance. The automatic stacking system ensures orderly and accurate sheet stacking, while manual packing provides operational flexibility and reduced investment cost.
With Mitsubishi PLC automation, compact layout, and reliable mechanical design, the line is an ideal solution for steel service centers focused on productivity and consistency. The machine is installed, fully operational, and available for inspection. 🔷 GENERAL INFORMATION Parameter Specification Line type Cut-to-Length Line
Manufacturer/Model ELMAKSAN / ELBK 2000 × 0.6–3 Material Cold rolled & galvanized steel Thickness range 0.6 – 3 mm Max. strip width 2000 mm Max. coil weight 30 tons Max. tensile strength 42 kg/mm² Yield strength 36 kg/mm²
Condition Installed & running ________________________________________ 🔷 LINE CONFIGURATION Uncoiler → Feeding & Straightening Section → Rotary Shear → Outfeed Conveyor → Automatic Stacking → Manual Packing ________________________________________ 🔷 UNIT-BY-UNIT TECHNICAL SPECIFICATIONS ________________________________________
1️⃣ UNCOILER Parameter Specification Max. coil weight 30 tons Coil inner diameter 510 – 610 mm Max. coil outer diameter 2100 mm ________________________________________ 2️⃣ FEEDING & STRAIGHTENING SYSTEM Parameter Specification Operation mode Continuous
Lubrication Automatic grease system Line direction As required Function: Ensures stable strip feeding and strip flatness prior to cutting, contributing to high cutting accuracy and surface quality. ________________________________________ 3️⃣ ROTARY SHEAR (CUTTING UNIT) Parameter Specification Cutting method Rotary shear
Diagonal cutting accuracy ±1 mm Cutting length tolerance ±1 mm Cutting reference Line center Max. cutting length 6000 mm Min. cutting length 500 mm Note: Rotary shear enables continuous cutting without stopping the line. The shear unit itself is stationary (non-flying).
________________________________________ 4️⃣ AUTOMATIC STACKING SYSTEM Parameter Specification Stack dimensions 400 × 500 mm up to 2000 × 6000 mm Stack height 450 mm Max. stack weight 10 tons Alignment Automatic side & end alignment Operation Automatic ________________________________________
5️⃣ MANUAL PACKING AREA Parameter Specification Packing method Manual Conveyor length 6000 mm Handling Crane / forklift compatible ________________________________________ 🔷 LINE PERFORMANCE Parameter Specification Max. line speed Up to 70 m/min (±10% adjustable)
Max. strip width 2000 mm Min. strip width 400 mm ________________________________________ 🔷 ELECTRICAL & AUTOMATION Parameter Specification Control system Mitsubishi PLC Total installed power Approx. 100 kW Max. hydraulic pressure 100 kg/cm²
Air pressure 5–8 kg/cm² Air consumption 1000 L/min ________________________________________ 🔷 LAYOUT & WEIGHT Parameter Specification Required space Approx. 24 m × 6 m Line height Approx. 3 m Total line weight Approx. 50 tons
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What is the cutting thickness range of this longitudinal cutting line?
This longitudinal cutting line has a cutting thickness range of 0.6 to 3 mm.
What is the cutting length of this equipment?
This equipment has a cutting length of 2000 mm.
What is the capacity of this machine?
This machine has a capacity of 30 tons.
What type of equipment is this?
This equipment is a rotary shear.
Does this longitudinal cutting line have automatic stacking?
This longitudinal cutting line features automatic stacking.
When was the unit installed?
The unit was installed in 2021.
Is this machine operational and available for inspection?
This machine is operational and can be inspected under power.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine Description:
Longitudinal cutting line for processing cold-rolled and galvanized steel coils. Suitable for materials with thickness from 0.6 to 3 mm and width up to 2000 mm. Manufacturer/Model: ELMAKSAN / ELBK 2000 × 0.6–3.
Key Features and Configuration:
- Configured for continuous operation with rotary shear, automatic sheet stacking, and manual packing.
- Standard line flow: Uncoiler → Feeding and leveling section → Rotary shear → Exit conveyor → Automatic stacking → Manual packing.
Technical Parameters (by subsystems):
- Uncoiler: max coil weight 30 tons; inner diameter 510–610 mm; max outer diameter 2100 mm.
- Feeding and leveling system: continuous mode; automatic lubrication system; line direction on request.
- Rotary shear: cutting method – rotary shear; accuracies: diagonal cut ±1 mm, length tolerance ±1 mm; cutting reference – line center; cutting length 500–6000 mm. Note: shear block is fixed (not flying), designed for continuous operation.
- Automatic stacking system: package size from 400×500 mm to 2000×6000 mm; package height 450 mm; max package weight 10 tons; automatic side and end alignment.
- Manual packing area: manual method; conveyor length 6000 mm; compatible with crane/forklift.
Operational Characteristics and Energy:
- Maximum line speed up to 70 m/min (adjustable ±10%).
- Maximum strip width 2000 mm; minimum 400 mm.
- Control: Mitsubishi PLC.
- Total installed power approx. 100 kW; max hydraulic pressure 100 kg/cm²; air pressure 5–8 kg/cm²; air consumption 1000 l/min.
Layout and Weight:
- Required area approximately 24 m × 6 m; height about 3 m; total line weight about 50 tons.
Materials and Mechanical Characteristics:
- Designed for cold-rolled and galvanized steel.
- Maximum tensile strength 42 kg/mm²; yield strength 36 kg/mm².
Condition:
- The original description states the machine is installed. Additional information on operational condition or service records is not included here.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2025 |
| Offers online | 6 |
| Last activity | Oct. 15, 2026 |
Линия за рязане по дължина 0,6–3 мм × 2000 мм – 30 тона – Ротационна ножица – Автоматично подреждане – Инсталирана
Linka pro řezání na míru 0,6–3 mm × 2000 mm – 30 tun – rotační nůžky – automatické stohování – nainstalována
Afkortningslinje 0,6–3 mm × 2000 mm – 30 tons – Roterende saks – Automatisk stabling – Installeret
Querteilanlage 0,6–3 mm × 2000 mm – 30 Tonnen – Rotationsschere – Automatische Stapelung – Installiert
Γραμμή κοπής κατά μήκος 0,6–3 mm × 2000 mm – 30 τόνοι – Περιστροφική διάτμηση – Αυτόματη στοίβαξη – Εγκατεστημένο
Cut-to-Length Line 0.6–3 mm × 2000 mm – 30 Ton – Rotary Shear – Automatic Stacking – Installed
Línea de corte longitudinal de 0,6–3 mm × 2000 mm – 30 toneladas – Cizalla rotativa – Apilado automático – Instalada
Ligne de coupe à longueur 0,6–3 mm × 2000 mm – 30 tonnes – Cisaille rotative – Empilage automatique – Installée
Linija za rezanje po duljini 0,6–3 mm × 2000 mm – 30 tona – Rotacijske škare – Automatsko slaganje – Instalirano
Vágósor 0,6–3 mm × 2000 mm – 30 tonna – Forgóolló – Automatikus rakodás – Telepítve
Linea di taglio a misura 0,6–3 mm × 2000 mm – 30 tonnellate – Cesoia rotante – Impilamento automatico – Installata
Pjovimo linija pagal ilgį 0,6–3 mm × 2000 mm – 30 tonų – Rotacinės žirklės – Automatinis krovimas – Įrengta
Snijlijn 0,6–3 mm × 2000 mm – 30 ton – Roterende schaar – Automatisch stapelen – Geïnstalleerd
Linia do cięcia na wymiar 0,6–3 mm × 2000 mm – 30 ton – nożyce obrotowe – automatyczne układanie w stosy – zainstalowana
Linha de corte em comprimento 0,6–3 mm × 2000 mm – 30 toneladas – Guilhotina rotativa – Empilhamento automático – Instalada
Linie de tăiere la lungime 0,6–3 mm × 2000 mm – 30 tone – Foarfecă rotativă – Stivuire automată – Instalată
Линия для нарезки по длине 0,6–3 мм × 2000 мм – 30 тонн – Роторные ножницы – Автоматическая укладка – Установлена
Linija za sečenje po dužini 0,6–3 mm × 2000 mm – 30 tona – Rotacione makaze – Automatsko slaganje – Instalirano
Kaplinje 0,6–3 mm × 2000 mm – 30 ton – Rotationssax – Automatisk stapling – Installerad
0,6–3 mm × 2000 mm – 30 Ton – Döner Makas – Otomatik İstifleme – Kurulumu Yapılmış Boy Kesme Hattı
EN
- Languages
English (GB)