Contact us to receive an offer.
| Manufacturer | EHT |
|---|---|
| Model | EHPS 15-35 |
| Year | 1993 |
| Location | Austria
|
Manufacturer: EHT
Model: EHPS 15-35
Year of manufacture: 1993
Condition: Used — in need of repair (not in working order)
Overview
Robust EHT hydraulic CNC press brake, model EHPS 15-35, built in 1993. Designed for medium- to heavy-duty sheet metal bending and fabrication applications. The machine is sold as a used industrial press brake and is currently not operational for bending until the reported error is addressed.
Key specifications
- Working/table length: 3,550 mm
- Pressing force: approx. 150 t (1,500 kN)
- Hydraulic oil tank capacity: 390 l
- Electrical input: 380 V, 50 Hz, 50 A, three-phase
- Control system: Cybelec DNC 880
Scope of supply / accessories (as listed)
- Set of upper tools / punches
- Set of lower tools / dies
- Special tools (included)
- Front/material supports
- Foot switch
- Side safety guards / protective grilles
Condition and important note
The machine is currently offered in a non-working condition and in need of repair. It can be started, but an error occurs during the initialization of the stops, which prevents execution of bending operations. The error would need to be bypassed or professionally repaired before the machine can be used for bending. The unit is expressly sold as a used industrial machine in need of repair.
Additional information
All specifications and included items are taken from the provided listing details. No functional guarantees, testing status, or refurbishment claims are provided beyond what is stated above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: EHT
Model: EHPS 15-35
Year of manufacture: 1993
Condition: in need of repair (second-hand)
Functionality: not in working order
Dimensions and weight
Table length: 3,550 mm
Hydraulic system
Oil tank capacity: 390 l
Technical specifications
Input voltage: 380 V
Input frequency: 50 Hz
Input current: 50 A
Type of input current: Three-phase current
Further details
Pressing force: 150 t
A robust EHT hydraulic press brake, model EHPS 15-35, built in 1993, is for sale.
The machine comes from an industrial stock and, following refurbishment, is ideally suited for sheet metal working, metalworking, metal fabrication, contract manufacturing or as a production machine for medium to heavy-duty bending work.
The press brake has a working length of 3,550 mm and a pressing force of 1,500 kN or approx. 150 t. It is fitted with a Cybelec DNC 880 control system. The scope of supply includes a comprehensive set of upper and lower dies as well as special tools.
Important note regarding the current condition
The machine can be started. However, an error occurs during the initialisation of the stops, which is why bending operations are currently not possible. The error would need to be bypassed or professionally repaired. Once this error has been rectified, the machine should be operational again. It is therefore expressly being sold as a used industrial machine in need of repair.
Specifications / Scope of supply
• EHT EHPS 15-35 hydraulic CNC press brake
• Cybelec DNC 880 control system
• Existing upper tools / punches
• Existing lower tools / dies
• Special tools included
Chjdbqmnlez E U Dps Aec
• Front supports / material supports
• Foot switch
• Side safety guards / protective grilles
• Robust EHT industrial design
• Large working length of 3,550 mm
• Pressing force approx. 150 t
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2018 |
| Offers online | 1 |
| Last activity | Oct. 6, 2026 |
Manufacturer: EHT
Model: EHPS 15-35
Year of manufacture: 1993
Condition: in need of repair (second-hand)
Functionality: not in working order
Dimensions and weight
Table length: 3,550 mm
Hydraulic system
Oil tank capacity: 390 l
Technical specifications
Input voltage: 380 V
Input frequency: 50 Hz
Input current: 50 A
Type of input current: Three-phase current
Further details
Pressing force: 150 t
A robust EHT hydraulic press brake, model EHPS 15-35, built in 1993, is for sale.
The machine comes from an industrial stock and, following refurbishment, is ideally suited for sheet metal working, metalworking, metal fabrication, contract manufacturing or as a production machine for medium to heavy-duty bending work.
The press brake has a working length of 3,550 mm and a pressing force of 1,500 kN or approx. 150 t. It is fitted with a Cybelec DNC 880 control system. The scope of supply includes a comprehensive set of upper and lower dies as well as special tools.
Important note regarding the current condition
The machine can be started. However, an error occurs during the initialisation of the stops, which is why bending operations are currently not possible. The error would need to be bypassed or professionally repaired. Once this error has been rectified, the machine should be operational again. It is therefore expressly being sold as a used industrial machine in need of repair.
Specifications / Scope of supply
• EHT EHPS 15-35 hydraulic CNC press brake
• Cybelec DNC 880 control system
• Existing upper tools / punches
• Existing lower tools / dies
• Special tools included
Chjdbqmnlez E U Dps Aec
• Front supports / material supports
• Foot switch
• Side safety guards / protective grilles
• Robust EHT industrial design
• Large working length of 3,550 mm
• Pressing force approx. 150 t
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: EHT
Model: EHPS 15-35
Year of manufacture: 1993
Condition: Used — in need of repair (not in working order)
Overview
Robust EHT hydraulic CNC press brake, model EHPS 15-35, built in 1993. Designed for medium- to heavy-duty sheet metal bending and fabrication applications. The machine is sold as a used industrial press brake and is currently not operational for bending until the reported error is addressed.
Key specifications
- Working/table length: 3,550 mm
- Pressing force: approx. 150 t (1,500 kN)
- Hydraulic oil tank capacity: 390 l
- Electrical input: 380 V, 50 Hz, 50 A, three-phase
- Control system: Cybelec DNC 880
Scope of supply / accessories (as listed)
- Set of upper tools / punches
- Set of lower tools / dies
- Special tools (included)
- Front/material supports
- Foot switch
- Side safety guards / protective grilles
Condition and important note
The machine is currently offered in a non-working condition and in need of repair. It can be started, but an error occurs during the initialization of the stops, which prevents execution of bending operations. The error would need to be bypassed or professionally repaired before the machine can be used for bending. The unit is expressly sold as a used industrial machine in need of repair.
Additional information
All specifications and included items are taken from the provided listing details. No functional guarantees, testing status, or refurbishment claims are provided beyond what is stated above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2018 |
| Offers online | 1 |
| Last activity | Oct. 6, 2026 |
EHT EHPS 15-35 абкант-преса с ЦПУ (нуждае се от ремонт)
EHT EHPS 15-35 CNC ohýbačka (vyžaduje opravu)
EHT EHPS 15-35 CNC-kantpresse (skal repareres)
EHT EHPS 15-35 CNC-Abkantpresse (reparaturbedürftig)
EHT EHPS 15-35 Πρέσα κάμψης με CNC (χρειάζεται επισκευή)
EHT EHPS 15-35 CNC press brake (in need of repair)
Plegadora CNC EHT EHPS 15-35 (necesita reparación)
EHT Plieuse CNC EHPS 15-35 (à réparer)
EHT EHPS 15-35 CNC preša-preklopnica (za popravak)
EHT EHPS 15–35 CNC hajlítógép (javításra szorul)
EHT EHPS 15-35 Piegatrice CNC (da riparare)
EHT EHPS 15-35 CNC lenkimo presas (reikia remonto)
EHT EHPS 15-35 CNC-kantpers (moet worden gerepareerd)
EHT EHPS 15-35 Prasa krawędziowa CNC (wymagająca naprawy)
EHT EHPS 15-35 Prensa-dobra CNC (necessita de reparação)
EHT EHPS 15-35 Presă de îndoit CNC (necesită reparații)
EHT EHPS 15-35 Гибочный пресс с ЧПУ (требует ремонта)
EHT EHPS 15-35 CNC presa-presavijač (treba popravku)
EHT EHPS 15-35 CNC-kantpress (behöver repareras)
EHT EHPS 15-35 CNC kant press (onarıma ihtiyaç duyuyor)
EN
- Languages
English (GB)