| Category | Bending - CNC press brakes |
| Strength | T |
| Folding length | mm |
| Distance between uprights | mm |
| CNC | |
| Throat | 250 mm |
| Vertical stroke | 160 mm |
| Working speed | 68 mm/s |
| Axis number | |
| Engine Power | 7.5 kW |
| Hole | |
| Length x width x height | 7060.0 × 1810.0 × 2780.0 |
| Weight | 4100 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Dunkes HR75 |
| Last availability date | 22/11/2026 |
| Product id | P260929278 |
| Language |
Dunkes HR75 metal press (2018) with a nominal straightening/pressing force of 750 kN. The machine is specified with a maximum ram stroke (vertical stroke) of 160 mm and a throat depth of 250 mm. Usable shaft length is 3000 mm, with usable shaft diameters listed as ø120 and ø170 mm. The straightening bridge length is 2000 mm and the machine includes bed extension equipment described as 2 x (1010 + 1520 mm) as well as attached tables of 2.5 m length each.
Key mechanical and dimensional data:
- Maximum stroke: 160 mm
- Throat depth: 250 mm
- Usable shaft length: 3000 mm
- Usable shaft diameters: ø120 / ø170 mm
- Straightening bridge length: 2000 mm
- Extension bed configuration: 2 x (1010 + 1520 mm) / attached tables 2.5 m length each
- Machine dimensions: length 7060 mm, width 1810 mm, height 2780 mm
- Machine weight: approx. 4100 kg (stated as without tools and additional equipment, without hydraulic oil)
- Installation height range: max 885 mm / min 725 mm
- Press table height above floor: 730 mm (with oil pan) / 700 mm (without oil pan)
Drive, hydraulic and electrical data:
- Main pump drive power / engine power: 7.5 kW
- Hydraulic tank capacity: approx. 280 liters
- Network type: L1-3/N/PE (TN-S), Frequency: 50 Hz, Operating voltage: 400 V~
- Connected load: 9 kVA, Nominal current: 14.5 A
- Supply line / fuse: 32 A CEE / 32 A
Speeds and acoustics:
- Ram speed DOWN: 2 – 30 mm/s
- Ram speed UP: 15 – 68 mm/s (working speed listed as 68 mm/s)
- Emission sound pressure level Lpa: 78.5 dB(A) with uncertainty Kpa: 8 dB(A)
Summary: This listing covers a Dunkes HR75 straightening/press press from 2018 with detailed electrical, hydraulic and dimensional specifications as provided. No claims are made regarding operational condition, testing, or refurbishment beyond the supplied specification data.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details.- Max. Installation Height: 885 mm
- Min. Installation Height: 725 mm
- Throat Depth: 250 mm
- Ram Speed "DOWN": 2 - 30 mm/s
- Ram Speed "UP": 15 - 68 mm/s
- Press Table Height above Floor (with / without oil pan): 730 / 700 mm
- Usable Shaft Length: 3000 mm
- Usable Shaft Diameter: ø 120 / ø 170 mm
- Straightening Bridge Length: 2000 mm
- Extension Bed Extension: 2 x (1010 + 1520 mm) / Attached tables 2.5 m length each
- Main Pump Drive Power: 7.5 kW
- Network Type: L1-3/N/PE (TN-S)
- Frequency: 50 Hz
- Operating Voltage: 400 V~
- Connected Load: 9 kVA
- Nominal Current: 14.5 A
- Supply Line / Fuse: 32 A CEE / 32 A
- Hydraulic Tank Capacity: approx. 280 Liters
- Weight (without tools and additional equipment, without hydraulic oil): approx. 4100 kg
- Emission Sound Pressure Level Lpa: 78.5 dB(A)
- Uncertainty Kpa: 8 dB(A)
Machine Height: 2780 mm
Machine Length: 7060 mm
Machine Weight: 4100 kg
Machine Width: 1810 mm
Max. Stroke: 160 mm
Pressing Force: 750 Kn
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2034 |
| Last activity | Nov. 22, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Metal press manufactured in 2018. This Dunkes HR75 features a nominal straightening force of 750 kN and a maximum ram stroke of 160 mm. The machine has a usable shaft length of 3000 mm and a throat depth of 250 mm. If you are looking to get high-quality straightening capabilities, consider the Dunkes HR75 machine we have for sale. Contact us for further details.- Max. Installation Height: 885 mm
- Min. Installation Height: 725 mm
- Throat Depth: 250 mm
- Ram Speed "DOWN": 2 - 30 mm/s
- Ram Speed "UP": 15 - 68 mm/s
- Press Table Height above Floor (with / without oil pan): 730 / 700 mm
- Usable Shaft Length: 3000 mm
- Usable Shaft Diameter: ø 120 / ø 170 mm
- Straightening Bridge Length: 2000 mm
- Extension Bed Extension: 2 x (1010 + 1520 mm) / Attached tables 2.5 m length each
- Main Pump Drive Power: 7.5 kW
- Network Type: L1-3/N/PE (TN-S)
- Frequency: 50 Hz
- Operating Voltage: 400 V~
- Connected Load: 9 kVA
- Nominal Current: 14.5 A
- Supply Line / Fuse: 32 A CEE / 32 A
- Hydraulic Tank Capacity: approx. 280 Liters
- Weight (without tools and additional equipment, without hydraulic oil): approx. 4100 kg
- Emission Sound Pressure Level Lpa: 78.5 dB(A)
- Uncertainty Kpa: 8 dB(A)
Machine Height: 2780 mm
Machine Length: 7060 mm
Machine Weight: 4100 kg
Machine Width: 1810 mm
Max. Stroke: 160 mm
Pressing Force: 750 Kn
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Category | Bending - CNC press brakes |
| Strength | T |
| Folding length | mm |
| Distance between uprights | mm |
| CNC | |
| Throat | 250 mm |
| Vertical stroke | 160 mm |
| Working speed | 68 mm/s |
| Axis number | |
| Engine Power | 7.5 kW |
| Hole | |
| Length x width x height | 7060.0 × 1810.0 × 2780.0 |
| Weight | 4100 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Dunkes HR75 |
| Last availability date | 22/11/2026 |
| Product id | P260929278 |
| Language |
Dunkes HR75 metal press (2018) with a nominal straightening/pressing force of 750 kN. The machine is specified with a maximum ram stroke (vertical stroke) of 160 mm and a throat depth of 250 mm. Usable shaft length is 3000 mm, with usable shaft diameters listed as ø120 and ø170 mm. The straightening bridge length is 2000 mm and the machine includes bed extension equipment described as 2 x (1010 + 1520 mm) as well as attached tables of 2.5 m length each.
Key mechanical and dimensional data:
- Maximum stroke: 160 mm
- Throat depth: 250 mm
- Usable shaft length: 3000 mm
- Usable shaft diameters: ø120 / ø170 mm
- Straightening bridge length: 2000 mm
- Extension bed configuration: 2 x (1010 + 1520 mm) / attached tables 2.5 m length each
- Machine dimensions: length 7060 mm, width 1810 mm, height 2780 mm
- Machine weight: approx. 4100 kg (stated as without tools and additional equipment, without hydraulic oil)
- Installation height range: max 885 mm / min 725 mm
- Press table height above floor: 730 mm (with oil pan) / 700 mm (without oil pan)
Drive, hydraulic and electrical data:
- Main pump drive power / engine power: 7.5 kW
- Hydraulic tank capacity: approx. 280 liters
- Network type: L1-3/N/PE (TN-S), Frequency: 50 Hz, Operating voltage: 400 V~
- Connected load: 9 kVA, Nominal current: 14.5 A
- Supply line / fuse: 32 A CEE / 32 A
Speeds and acoustics:
- Ram speed DOWN: 2 – 30 mm/s
- Ram speed UP: 15 – 68 mm/s (working speed listed as 68 mm/s)
- Emission sound pressure level Lpa: 78.5 dB(A) with uncertainty Kpa: 8 dB(A)
Summary: This listing covers a Dunkes HR75 straightening/press press from 2018 with detailed electrical, hydraulic and dimensional specifications as provided. No claims are made regarding operational condition, testing, or refurbishment beyond the supplied specification data.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2034 |
| Last activity | Nov. 22, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.