| Manufacturer | DN SOLUTIONS |
|---|---|
| Model | DNM 6700 |
| Year | 2024 |
| Location | Portugal
|
DN SOLUTIONS DNM 6700 vertical machining centre (manufactured 2024). This 3-axis machine is configured with an X travel of 1,300 mm, Y travel of 670 mm and Z travel of 625 mm. The machine is equipped with a 1,500 × 670 mm table with a maximum table load of 1,300 kg. Control is FANUC i series (iHMI Easy Operating System with EZI & Machining Cycle), configured for 3 axes.
Spindle and tooling: maximum spindle speed 12,000 rpm, spindle power listed as 15 kW (peak) / 11 kW (continuous) and BIG PLUS BT40 spindle taper and tool holder type. Tool magazine is a geared-driven type with 30 tool stations. Rapid traverse rates are specified as 36 / 36 / 30 m/min (X/Y/Z). Through-spindle coolant is specified at 1.5 kW / 2.0 MPa (20 bar). A flood coolant pump is listed at 0.4 kW / 0.15 MPa / 40 L/min.
Control and electronics: embedded Ethernet, program storage 5,120 m (2 MB) with capacity for 1,000 programs, AICC II (200 blocks), built-in transformer and electrical line filter. The machine is CE certified and set in metric configuration. Power supply is 3-phase AC 380V / 50Hz.
Additional equipment and accessories: hinged belt chip conveyor (right side), portable MPG handwheel and additional axis preparation (1 axis wiring & pneumatics). The machine listing includes a right-side control panel with display, keypad and emergency stop, twin front doors with windows and vertical rails, a blue left-side enclosure with shield logo and a coiled blue cable / air hose at the base (may be an accessory).
Notes and cautions: specifications above are taken from the provided machine data and listing. No statements are made regarding operational condition, testing, refurbishment or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis DN SOLUTIONS DNM 6700 was manufactured in 2024. It features an impressive X-axis travel of 1,300 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine includes a robust table size of 1,500 × 670 mm and a maximum table load of 1,300 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 6700 vertical machining centre we have for sale. Contact us for further details.15" color touchscreen display
Absolute feedback system
CE certified
Metric configuration
Power supply: 3-phase AC 380V / 50Hz
Table size: 1,500 × 670 mm
Spindle motor power: 15 / 11 kW
Spindle taper: BIG PLUS BT40
Spindle head cooling system
Tool magazine type: geared driven
Tool holder type: BIG PLUS BT40
Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min
Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min
Through-spindle coolant: 1.5 kW / 2.0 MPa (20 bar)
Embedded Ethernet
Program storage: 5,120 m (2 MB)
Program capacity: 1,000 programs
AICC II – 200 blocks
iHMI Easy Operating System (EZI & Machining Cycle)
Built-in transformer
Electrical line filter
Additional equipment
Hinged belt chip conveyor (right side)
Portable MPG handwheel
Additional axis preparation (1 axis wiring & pneumatics)
Control Brand: FANUC
Control Model: i series
Number of Axes: 3
Tool Stations: 30
Spindle Power: 15 kW
Spindle Speed: 12000 RPM
Table Load: 1300 kg
X-axis Travel: 1300 mm
Y-axis Travel: 670 mm
Z-axis Travel: 625 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2055 |
| Last activity | Oct. 29, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis DN SOLUTIONS DNM 6700 was manufactured in 2024. It features an impressive X-axis travel of 1,300 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine includes a robust table size of 1,500 × 670 mm and a maximum table load of 1,300 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 6700 vertical machining centre we have for sale. Contact us for further details.15" color touchscreen display
Absolute feedback system
CE certified
Metric configuration
Power supply: 3-phase AC 380V / 50Hz
Table size: 1,500 × 670 mm
Spindle motor power: 15 / 11 kW
Spindle taper: BIG PLUS BT40
Spindle head cooling system
Tool magazine type: geared driven
Tool holder type: BIG PLUS BT40
Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min
Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min
Through-spindle coolant: 1.5 kW / 2.0 MPa (20 bar)
Embedded Ethernet
Program storage: 5,120 m (2 MB)
Program capacity: 1,000 programs
AICC II – 200 blocks
iHMI Easy Operating System (EZI & Machining Cycle)
Built-in transformer
Electrical line filter
Additional equipment
Hinged belt chip conveyor (right side)
Portable MPG handwheel
Additional axis preparation (1 axis wiring & pneumatics)
Control Brand: FANUC
Control Model: i series
Number of Axes: 3
Tool Stations: 30
Spindle Power: 15 kW
Spindle Speed: 12000 RPM
Table Load: 1300 kg
X-axis Travel: 1300 mm
Y-axis Travel: 670 mm
Z-axis Travel: 625 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
DN SOLUTIONS DNM 6700 vertical machining centre (manufactured 2024). This 3-axis machine is configured with an X travel of 1,300 mm, Y travel of 670 mm and Z travel of 625 mm. The machine is equipped with a 1,500 × 670 mm table with a maximum table load of 1,300 kg. Control is FANUC i series (iHMI Easy Operating System with EZI & Machining Cycle), configured for 3 axes.
Spindle and tooling: maximum spindle speed 12,000 rpm, spindle power listed as 15 kW (peak) / 11 kW (continuous) and BIG PLUS BT40 spindle taper and tool holder type. Tool magazine is a geared-driven type with 30 tool stations. Rapid traverse rates are specified as 36 / 36 / 30 m/min (X/Y/Z). Through-spindle coolant is specified at 1.5 kW / 2.0 MPa (20 bar). A flood coolant pump is listed at 0.4 kW / 0.15 MPa / 40 L/min.
Control and electronics: embedded Ethernet, program storage 5,120 m (2 MB) with capacity for 1,000 programs, AICC II (200 blocks), built-in transformer and electrical line filter. The machine is CE certified and set in metric configuration. Power supply is 3-phase AC 380V / 50Hz.
Additional equipment and accessories: hinged belt chip conveyor (right side), portable MPG handwheel and additional axis preparation (1 axis wiring & pneumatics). The machine listing includes a right-side control panel with display, keypad and emergency stop, twin front doors with windows and vertical rails, a blue left-side enclosure with shield logo and a coiled blue cable / air hose at the base (may be an accessory).
Notes and cautions: specifications above are taken from the provided machine data and listing. No statements are made regarding operational condition, testing, refurbishment or warranty.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2055 |
| Last activity | Oct. 29, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център DN SOLUTIONS DNM 6700
Vertikální obráběcí centrum DN SOLUTIONS DNM 6700
DN SOLUTIONS DNM 6700 Lodret bearbejdningscenter
DN SOLUTIONS DNM 6700 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας DN SOLUTIONS DNM 6700
DN SOLUTIONS DNM 6700 Vertical machining center
Centro de mecanizado vertical DN SOLUTIONS DNM 6700
Centre d'usinage vertical DN SOLUTIONS DNM 6700
Vertikalni obradni centar DN SOLUTIONS DNM 6700
DN SOLUTIONS DNM 6700 Függőleges megmunkáló központ
Centro di lavoro verticale DN SOLUTIONS DNM 6700
DN SOLUTIONS DNM 6700 Vertikalus apdirbimo centras
DN SOLUTIONS DNM 6700 Verticaal bewerkingscentrum
Pionowe centrum obróbcze DN SOLUTIONS DNM 6700
Centro de usinagem vertical DN SOLUTIONS DNM 6700
Centru de prelucrare vertical DN SOLUTIONS DNM 6700
DN SOLUTIONS DNM 6700 Вертикальный обрабатывающий центр
Vertikalni obradni centar DN SOLUTIONS DNM 6700
DN SOLUTIONS DNM 6700 Vertikalt bearbetningscenter
Dikey işleme merkezi DN SOLUTIONS DNM 6700
EN
- Languages
English (GB)