| Category | Machining centers - horizontal |
| Axis X | 730 mm |
| Axis Y | 730 mm |
| Axis Z | 880 mm |
| Rotary table (4th axis) | no |
| CNC | |
| Table length | 500 mm |
| Table width | 500 mm |
| Max. part weight | 500 kg |
| Number of tool pockets | 40 |
| Spindle taper | HSK63 |
| Max. spindle speed | 15000 rpm |
| Spindle motor power | 21 kW |
| Weight | 12000 kg |
| worked hours | 27715 hours |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Dmg Mori NHX 4000 |
| Last availability date | 15/11/2026 |
| Product id | P2603121303 |
| Language |
This DMG MORI NHX 5000 is a horizontal machining center manufactured in 2017, designed for precision and efficiency in machining operations. It features a powerful 21 kW spindle motor capable of reaching speeds up to 15,000 rpm, suitable for a variety of machining tasks. The machine offers substantial travel distances of 730 mm along both the X and Y axes, and 880 mm along the Z axis, allowing for versatile part handling.
The NHX 5000 is equipped with a 500 x 500 mm pallet size and can handle a maximum part weight of 500 kg, supporting demanding production requirements. It includes a tool magazine with a capacity of 40 tools, facilitating complex machining processes without frequent tool changes. The machine has a weight of 12,000 kg, reflecting its robust construction.
The control system is a CELOS Siemens 840D sl with a 21.5" ERGOline multi-touch display, providing an intuitive interface for machine operation. The control panel, attached to the left side, includes a screen and keyboard, and features control buttons and an emergency stop on the door's right side for safety.
The machine's exterior and interior work area appear clean and well-maintained, with no visible damage. Visible components include transparent panels on the right side showing internal piping and coolant or air lines, as well as ventilation grills on the right side cabinet. Coiled cables are present near the control panel, indicating organized cable management.
Additional standard features include a direct drive NC table B axis with fine indexing, rapid traverse rates of 60 m/min on all axes, and a spindle torque of 111 Nm (continuous 85 Nm). Safety signage such as no smoking or open flame signs are present on the door. This machine is a solid choice for those seeking a reliable and capable horizontal machining center from a reputable manufacturer.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details.Spindle torque: 111 Nm (continuous 85 Nm)
Tool capacity: 40 tools (optional magazine 60 tools)
Rapid traverse (X/Y/Z): 60 m/min
Acceleration (X/Y/Z): 1G
Pallet size: 500 x 500 mm
Number of pallets: 2
Automatic rotary pallet changer: 2 stations
NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm
Maximum pallet load: standard 500 kg (optional 700 kg)
Direct position measuring system; Linear scale standard
Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display
Electronic handwheel: Siemens
Coolant through spindle preparation up to 70 bar
Renishaw probe OMP60
Tool breakage detection system
Machine status signal lamp
Water-glycol spindle cooling unit
Application Tuning Cycle (ATC)
Machine bed: 3-point support
Power connection: L1 L2 L3 N PE
Connected load: 46 kVA
Maximum input current: 67 A
Fuse protection: 125 A
Short circuit current: 1.25 kA
Maximum supply voltage: 4.0 kV
Supply voltage: 400 V ±10 %
Frequency: 50 Hz
Control voltage: AC 230 V / DC 24 V
Operating time: 27,715 h
Spindle hours: 15,208 h
Additional equipment
Knoll KF110/700
Knoll Flow Monitor
High-pressure coolant system
2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories
95x tool holders HSK63 (various clamping devices)
Machine Weight: 12000 kg
Number of Axes: 4
Spindle Power: 21 kW
Spindle Speed: 15000 RPM
Taper Size: BT 40
X-axis Travel: 730 mm
Y-axis Travel: 730 mm
Z-axis Travel: 880 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2058 |
| Last activity | Nov. 16, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details.Spindle torque: 111 Nm (continuous 85 Nm)
Tool capacity: 40 tools (optional magazine 60 tools)
Rapid traverse (X/Y/Z): 60 m/min
Acceleration (X/Y/Z): 1G
Pallet size: 500 x 500 mm
Number of pallets: 2
Automatic rotary pallet changer: 2 stations
NC table B axis: direct drive, indexing 0.001°, max speed 100 rpm
Maximum pallet load: standard 500 kg (optional 700 kg)
Direct position measuring system; Linear scale standard
Control system: CELOS Siemens 840D sl with 21.5" ERGOline multi-touch display
Electronic handwheel: Siemens
Coolant through spindle preparation up to 70 bar
Renishaw probe OMP60
Tool breakage detection system
Machine status signal lamp
Water-glycol spindle cooling unit
Application Tuning Cycle (ATC)
Machine bed: 3-point support
Power connection: L1 L2 L3 N PE
Connected load: 46 kVA
Maximum input current: 67 A
Fuse protection: 125 A
Short circuit current: 1.25 kA
Maximum supply voltage: 4.0 kV
Supply voltage: 400 V ±10 %
Frequency: 50 Hz
Control voltage: AC 230 V / DC 24 V
Operating time: 27,715 h
Spindle hours: 15,208 h
Additional equipment
Knoll KF110/700
Knoll Flow Monitor
High-pressure coolant system
2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories
95x tool holders HSK63 (various clamping devices)
Machine Weight: 12000 kg
Number of Axes: 4
Spindle Power: 21 kW
Spindle Speed: 15000 RPM
Taper Size: BT 40
X-axis Travel: 730 mm
Y-axis Travel: 730 mm
Z-axis Travel: 880 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Machining centers - horizontal |
| Axis X | 730 mm |
| Axis Y | 730 mm |
| Axis Z | 880 mm |
| Rotary table (4th axis) | no |
| CNC | |
| Table length | 500 mm |
| Table width | 500 mm |
| Max. part weight | 500 kg |
| Number of tool pockets | 40 |
| Spindle taper | HSK63 |
| Max. spindle speed | 15000 rpm |
| Spindle motor power | 21 kW |
| Weight | 12000 kg |
| worked hours | 27715 hours |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Dmg Mori NHX 4000 |
| Last availability date | 15/11/2026 |
| Product id | P2603121303 |
| Language |
This DMG MORI NHX 5000 is a horizontal machining center manufactured in 2017, designed for precision and efficiency in machining operations. It features a powerful 21 kW spindle motor capable of reaching speeds up to 15,000 rpm, suitable for a variety of machining tasks. The machine offers substantial travel distances of 730 mm along both the X and Y axes, and 880 mm along the Z axis, allowing for versatile part handling.
The NHX 5000 is equipped with a 500 x 500 mm pallet size and can handle a maximum part weight of 500 kg, supporting demanding production requirements. It includes a tool magazine with a capacity of 40 tools, facilitating complex machining processes without frequent tool changes. The machine has a weight of 12,000 kg, reflecting its robust construction.
The control system is a CELOS Siemens 840D sl with a 21.5" ERGOline multi-touch display, providing an intuitive interface for machine operation. The control panel, attached to the left side, includes a screen and keyboard, and features control buttons and an emergency stop on the door's right side for safety.
The machine's exterior and interior work area appear clean and well-maintained, with no visible damage. Visible components include transparent panels on the right side showing internal piping and coolant or air lines, as well as ventilation grills on the right side cabinet. Coiled cables are present near the control panel, indicating organized cable management.
Additional standard features include a direct drive NC table B axis with fine indexing, rapid traverse rates of 60 m/min on all axes, and a spindle torque of 111 Nm (continuous 85 Nm). Safety signage such as no smoking or open flame signs are present on the door. This machine is a solid choice for those seeking a reliable and capable horizontal machining center from a reputable manufacturer.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2058 |
| Last activity | Nov. 16, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.