| Manufacturer | DMG |
|---|---|
| Model | DMU 40 eVo |
| Year | 2012 |
| Location | Germany
|
DMG DMU 40 eVo 5-axis universal machining centre, manufactured in 2012. The machine has a Siemens 840D sl CNC control and a maximum spindle speed of 18,000 rpm. Axis travel is 450 mm in X, 400 mm in Y and 375 mm in Z. The spindle is specified at 35 kW / 25 kW and 130 Nm / 87 Nm (40% / 100% ED), with an HSK-A63 tool taper and 25 kN tool clamping force.
The swivel rotary table has a 480 x 400 mm clamping surface and a stated maximum table load of 250 kg. Its C-axis rotates continuously through 360°, and the B-axis tilts from -5° to +110°. Both axes have a stated maximum speed of 60 rpm. The tool magazine holds 30 pockets, and the maximum tool length is 300 mm. Rapid traverse is specified at 50 m/min, with program feed up to 80,000 mm/min. The machine also has absolute linear and rotary scale encoders and AC servomotor feed drives on the X, Y, Z, B and C axes.
Additional listed equipment includes a scraper-belt chip conveyor with a 180 L coolant tank, coolant flush pumps, internal tool air cooling and a heat exchanger. Machine dimensions with control and chip conveyor are 4008 x 4617 x 2477 mm, and the stated weight is approximately 6,900 kg. Listed operating hours are 2,500 h.
The machine has an enclosed white and dark-gray housing and a separate operator console with display and keyboard on an arm at the right side. The exterior appears intact, with some dirt and scuffing around the lower housing and base. Clamping devices, a DMG Mori Seiki PowerProbe 60 optical touch probe, tool holders and milling cutters are listed as optional equipment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 5-axis DMG DMU 40 eVo was manufactured in 2012. It features a travel range of 400 mm in the X and Y axes, and 375 mm in the Z axis. The machine includes a swivel rotary table with a clamping surface of 480 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the DMG DMU 40 eVo universal machining centre. Contact us for further details.- CNC Control: Siemens 840D sl
- Machine Operating Hours: 2500 h
- Spindle Power (40% ED / 100% ED): 35 kW / 25 kW
- Spindle Torque (40% ED / 100% ED): 130 Nm / 87 Nm
- Tool Taper: HSK-A63
- Tool Clamping Force: 25 kN
- Swivel Rotary Table Clamping Surface: 480 x 400 mm
- T-Slots: 5 slots, 14H7, 63 mm spacing
- Center Bore: 30H6 mm
- Table Load Capacity (center): 250 kg
- Swivel Rotary Table Rotation (C-axis): 360° (continuous nx360°), max 60 rpm
- Swivel Rotary Table Tilt (B-axis): -5° to +110°, max 60 rpm
- Travel Range Y-Axis: 400 mm - Travel Range Z-Axis: 375 mm - Rapid Traverse (X / Y / Z): 50 m/min (program feed up to 80,000 mm/min)
- Tool Magazine Capacity: 30 pockets
- Max. Tool Length: 300 mm - Feed Drives: AC servomotors on X, Y, Z, B, C
- Measuring System: Absolute linear/rotary scale encoders
- Coolant Tank & Chip Conveyor: Scraper belt type, 180 L tank, 400 kg conveyor weight
- Coolant Flush Pump: External feed 40 l/min (2.3 bar), chip flush 100 l/min (1.1 bar), wash gun 40 l/min (2.3 bar)
- Internal Tool Air Cooling: ~5.5 bar
- Heat Exchanger: 360 W/K cooling power, media temp up to 60°C, ambient 0-40°C
- Electrical Connection: 400 V, 50 Hz, 29 kV
- Compressed Air Supply: 5.5 - 8 bar
- Machine Dimensions (LxBxH): 2867 x 1970 x 2477 mm (without control); 4008 x 4617 x 2477 mm (with control and chip conveyor)
- Machine Weight: ca. 6,900 kg
Optional Equipment:
Clamping Devices
Touch Probe: DMG Mori Seiki PowerProbe 60 optical touch probe with HSK shank
Tool Holders
Milling Cutters
Number of Axes: 5
Spindle Speed: 18000 RPM
X-axis Travel: 450 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2058 |
| Last activity | Nov. 13, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 5-axis DMG DMU 40 eVo was manufactured in 2012. It features a travel range of 400 mm in the X and Y axes, and 375 mm in the Z axis. The machine includes a swivel rotary table with a clamping surface of 480 x 400 mm and a maximum table load capacity of 250 kg. If you are looking to get high-quality machining capabilities, consider the DMG DMU 40 eVo universal machining centre. Contact us for further details.- CNC Control: Siemens 840D sl
- Machine Operating Hours: 2500 h
- Spindle Power (40% ED / 100% ED): 35 kW / 25 kW
- Spindle Torque (40% ED / 100% ED): 130 Nm / 87 Nm
- Tool Taper: HSK-A63
- Tool Clamping Force: 25 kN
- Swivel Rotary Table Clamping Surface: 480 x 400 mm
- T-Slots: 5 slots, 14H7, 63 mm spacing
- Center Bore: 30H6 mm
- Table Load Capacity (center): 250 kg
- Swivel Rotary Table Rotation (C-axis): 360° (continuous nx360°), max 60 rpm
- Swivel Rotary Table Tilt (B-axis): -5° to +110°, max 60 rpm
- Travel Range Y-Axis: 400 mm - Travel Range Z-Axis: 375 mm - Rapid Traverse (X / Y / Z): 50 m/min (program feed up to 80,000 mm/min)
- Tool Magazine Capacity: 30 pockets
- Max. Tool Length: 300 mm - Feed Drives: AC servomotors on X, Y, Z, B, C
- Measuring System: Absolute linear/rotary scale encoders
- Coolant Tank & Chip Conveyor: Scraper belt type, 180 L tank, 400 kg conveyor weight
- Coolant Flush Pump: External feed 40 l/min (2.3 bar), chip flush 100 l/min (1.1 bar), wash gun 40 l/min (2.3 bar)
- Internal Tool Air Cooling: ~5.5 bar
- Heat Exchanger: 360 W/K cooling power, media temp up to 60°C, ambient 0-40°C
- Electrical Connection: 400 V, 50 Hz, 29 kV
- Compressed Air Supply: 5.5 - 8 bar
- Machine Dimensions (LxBxH): 2867 x 1970 x 2477 mm (without control); 4008 x 4617 x 2477 mm (with control and chip conveyor)
- Machine Weight: ca. 6,900 kg
Optional Equipment:
Clamping Devices
Touch Probe: DMG Mori Seiki PowerProbe 60 optical touch probe with HSK shank
Tool Holders
Milling Cutters
Number of Axes: 5
Spindle Speed: 18000 RPM
X-axis Travel: 450 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
DMG DMU 40 eVo 5-axis universal machining centre, manufactured in 2012. The machine has a Siemens 840D sl CNC control and a maximum spindle speed of 18,000 rpm. Axis travel is 450 mm in X, 400 mm in Y and 375 mm in Z. The spindle is specified at 35 kW / 25 kW and 130 Nm / 87 Nm (40% / 100% ED), with an HSK-A63 tool taper and 25 kN tool clamping force.
The swivel rotary table has a 480 x 400 mm clamping surface and a stated maximum table load of 250 kg. Its C-axis rotates continuously through 360°, and the B-axis tilts from -5° to +110°. Both axes have a stated maximum speed of 60 rpm. The tool magazine holds 30 pockets, and the maximum tool length is 300 mm. Rapid traverse is specified at 50 m/min, with program feed up to 80,000 mm/min. The machine also has absolute linear and rotary scale encoders and AC servomotor feed drives on the X, Y, Z, B and C axes.
Additional listed equipment includes a scraper-belt chip conveyor with a 180 L coolant tank, coolant flush pumps, internal tool air cooling and a heat exchanger. Machine dimensions with control and chip conveyor are 4008 x 4617 x 2477 mm, and the stated weight is approximately 6,900 kg. Listed operating hours are 2,500 h.
The machine has an enclosed white and dark-gray housing and a separate operator console with display and keyboard on an arm at the right side. The exterior appears intact, with some dirt and scuffing around the lower housing and base. Clamping devices, a DMG Mori Seiki PowerProbe 60 optical touch probe, tool holders and milling cutters are listed as optional equipment.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2058 |
| Last activity | Nov. 13, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
5-осен обработващ център DMG DMU 40 eVo
5osé obráběcí centrum DMG DMU 40 eVo
DMG DMU 40 eVo 5-akset bearbejdningscenter
DMG DMU 40 eVo 5-Achs-Bearbeitungszentrum
Κέντρο κατεργασίας 5 αξόνων DMG DMU 40 eVo
DMG DMU 40 eVo 5-axis machining center
Centro de mecanizado de 5 ejes DMG DMU 40 eVo
Centre d'usinage 5 axes DMG DMU 40 eVo
5-osni obradni centar DMG DMU 40 eVo
DMG DMU 40 eVo 5 tengelyes megmunkáló központ
Centro di lavoro a 5 assi DMG DMU 40 eVo
DMG DMU 40 eVo 5 ašių apdirbimo centras
DMG DMU 40 eVo 5-assig bewerkingscentrum
Centrum obróbcze 5-osiowe DMG DMU 40 eVo
Centro de usinagem de 5 eixos DMG DMU 40 eVo
Centru de prelucrare cu 5 axe DMG DMU 40 eVo
DMG DMU 40 eVo 5-осевой обрабатывающий центр
5-osni obradni centar DMG DMU 40 eVo
DMG DMU 40 eVo 5-axligt bearbetningscenter
5 eksenli işleme merkezi DMG DMU 40 eVo
EN
- Languages
English (GB)