| Manufacturer | DMG DECKEL MAHO |
|---|---|
| Model | 1035V |
| Year | 2006 |
| Location | Germany
|
The offered vertical machining center DMG DECKEL MAHO 1035V is a reliable machine manufactured in 2006, designed for precise four-axis machining. The machine features travels along the X axis of 1035 mm, Y axis of 560 mm, and Z axis of 510 mm, providing ample space for machining various parts. It is equipped with a spindle with a maximum speed of up to 12,000 revolutions per minute and an SK 40 taper, suitable for a variety of tools and applications. Control is performed via the intuitive Heidenhain iTNC 530 system, which offers precise control and capabilities for complex programs.
The machine has a tool magazine with a capacity of 30 positions of chain-type mechanism, allowing quick tool changes and increasing productivity. The central lubrication system uses a Vogel pump with Divinol Lithogrease 000 liquid grease, ensuring reliable and effective lubrication of all moving parts. A pneumatic regulating module with integrated air filter and regulating block from SMC / Festo is built in, contributing to stable operation of the pneumatic systems.
Additional technical data include power of 35 kVA, maximum nominal current of 50 A, and power supply with a mains voltage of 400 V at a frequency of 50/60 Hz. The machine has an electronic handwheel and Heidenhain TS640 sensor for precise adjustments and control. The operating time of the control and machine is documented, which may be of interest to potential buyers.
This vertical machining center is suitable for companies looking for high-quality equipment with proven technical characteristics and reliability. For more information and details regarding the condition and capabilities of the machine, please contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details.
Control Unit
Control Brand: HEIDENHAIN
Control Model: iTNC 530 E
Movement
Number of Axes: 4
X-axis Travel: 1035 mm
Y-axis Travel: 560 mm
Z-axis Travel: 510 mm
Technical Specfication
Spindle Speed: 12000 RPM
Additional Information
- PLC Software-Nummer: 4B0000_HEDR_02C
- Development status: L3
- DSP1: 340514 03.1
- ICTL1: 340517 01
- Control On Time: 40,697 hours
- Machine On Time: 38,700 hours
- Program Run Time: 15,863 hours
- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours
- Tool Changer Cycles Time: 1,585 hours
- Spindle Taper: SK 40
- Tool Magazine Capacity: 30 positions (Chain type)
- Touch Probe: Heidenhain TS640
- Electronic Handwheel: Heidenhain
- Power Capacity: 35 kVA
- Maximum Nominal Current (A Jn max): 50 A
- Fuse / Input Current: 63 A
- Mains Voltage: 400 V
- Frequency: 50/60 Hz
- Control Voltage: 230 V
- Direct Current Supply: 24 V
- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease
- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details.
Control Unit
Control Brand: HEIDENHAIN
Control Model: iTNC 530 E
Movement
Number of Axes: 4
X-axis Travel: 1035 mm
Y-axis Travel: 560 mm
Z-axis Travel: 510 mm
Technical Specfication
Spindle Speed: 12000 RPM
Additional Information
- PLC Software-Nummer: 4B0000_HEDR_02C
- Development status: L3
- DSP1: 340514 03.1
- ICTL1: 340517 01
- Control On Time: 40,697 hours
- Machine On Time: 38,700 hours
- Program Run Time: 15,863 hours
- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours
- Tool Changer Cycles Time: 1,585 hours
- Spindle Taper: SK 40
- Tool Magazine Capacity: 30 positions (Chain type)
- Touch Probe: Heidenhain TS640
- Electronic Handwheel: Heidenhain
- Power Capacity: 35 kVA
- Maximum Nominal Current (A Jn max): 50 A
- Fuse / Input Current: 63 A
- Mains Voltage: 400 V
- Frequency: 50/60 Hz
- Control Voltage: 230 V
- Direct Current Supply: 24 V
- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease
- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The offered vertical machining center DMG DECKEL MAHO 1035V is a reliable machine manufactured in 2006, designed for precise four-axis machining. The machine features travels along the X axis of 1035 mm, Y axis of 560 mm, and Z axis of 510 mm, providing ample space for machining various parts. It is equipped with a spindle with a maximum speed of up to 12,000 revolutions per minute and an SK 40 taper, suitable for a variety of tools and applications. Control is performed via the intuitive Heidenhain iTNC 530 system, which offers precise control and capabilities for complex programs.
The machine has a tool magazine with a capacity of 30 positions of chain-type mechanism, allowing quick tool changes and increasing productivity. The central lubrication system uses a Vogel pump with Divinol Lithogrease 000 liquid grease, ensuring reliable and effective lubrication of all moving parts. A pneumatic regulating module with integrated air filter and regulating block from SMC / Festo is built in, contributing to stable operation of the pneumatic systems.
Additional technical data include power of 35 kVA, maximum nominal current of 50 A, and power supply with a mains voltage of 400 V at a frequency of 50/60 Hz. The machine has an electronic handwheel and Heidenhain TS640 sensor for precise adjustments and control. The operating time of the control and machine is documented, which may be of interest to potential buyers.
This vertical machining center is suitable for companies looking for high-quality equipment with proven technical characteristics and reliability. For more information and details regarding the condition and capabilities of the machine, please contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2049 |
| Last activity | Nov. 7, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център DMG DECKEL MAHO 1035V
Vertikální obráběcí centrum DMG DECKEL MAHO 1035V
DMG DECKEL MAHO 1035V Lodret bearbejdningscenter
DMG DECKEL MAHO 1035V Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας DMG DECKEL MAHO 1035V
DMG DECKEL MAHO 1035V Vertical machining center
Centro de mecanizado vertical DMG DECKEL MAHO 1035V
Centre d'usinage vertical DMG DECKEL MAHO 1035V
Vertikalni obradni centar DMG DECKEL MAHO 1035V
DMG DECKEL MAHO 1035V Függőleges megmunkáló központ
Centro di lavoro verticale DMG DECKEL MAHO 1035V
DMG DECKEL MAHO 1035V Vertikalus apdirbimo centras
DMG DECKEL MAHO 1035V Verticaal bewerkingscentrum
Pionowe centrum obróbcze DMG DECKEL MAHO 1035V
Centro de usinagem vertical DMG DECKEL MAHO 1035V
Centru de prelucrare vertical DMG DECKEL MAHO 1035V
DMG DECKEL MAHO 1035V Вертикальный обрабатывающий центр
Vertikalni obradni centar DMG DECKEL MAHO 1035V
DMG DECKEL MAHO 1035V Vertikalt bearbetningscenter
Dikey işleme merkezi DMG DECKEL MAHO 1035V
EN
- Languages
English (GB)