| Manufacturer | DMC |
|---|---|
| Model | 7 INCH TUBE MILL |
| Year | 2019 |
| Location | South Korea
|
USED 7-INCH PIPE BAND MACHINE
Overview
This is a band production line for manufacturing round, square, and rectangular pipes. The equipment includes all main sections for uncoiling coils, forming, welding, cooling, cutting, and packaging, as well as electrical and hydraulic equipment. The manufacturer and year of production are specified in the specifications.
Composition (main modules)
- Coil guide
- Coil lifting trolley with opener and peeler
- Uncoiler
- Pressing leveler
- Automatic cutting machine and end welding
- Rotary accumulator
- Forming entry section and forming section
- Welding section and high-frequency welding with cooling system
- Cooling bath and emulsion cooling system
- Sizing section
- Cold saw cutting machine
- Exit table
- Automatic packaging system
- Rolling tools
- Electrical equipment
Production capacity
- Round pipes: 95.54 mm (3.76 inches) – 191.08 mm (7.52 inches)
- Square pipes: 75×75 – 125×125
- Rectangular pipes: 100×50 – 150×100
Technical specifications
1) Tensile strength: Max. 42.0 kg/mm
2) Coil outer diameter: Max. ø2,000 Min. ø1,500
3) Coil inner diameter: ø610 mm
4) Coil width: Max. 600 mm Min. 150 mm
5) Pipe outer diameter: Max. ø168.3 Min. ø50.8
6) Line speed: Max. 60 Min. 20 m/min
7) Thickness: Max. 7.0 Min. 1.4 mm
8) Pipe cutting length: Max. 12,000 mm Min. 6,000 mm
9) Electrical source: AC440V, 60Hz, 3P (Main)
10) Line direction: L → D
11) Hydraulic pressure: 150 kg/cm²
12) Year of production / Manufacturer: 2019 / DMC
13) Welding capacity: 500 kW (HF welder)
Note
Description and specifications are based on the available data for the machine. No additional visual data are included in this description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
USED 7 INCH TUBE MILL
- Composition
Coil guide - Coil Lifting Car with Opener and Peeler - Uncoiler - Pinch Leveler - Auto Shear and End welder -
Rotary Accumulator - Forming Entry Part - Forming Part - Welding Part - HF Welder Cooling System -
Cooling Bath - Emulsion Cooling System - Sizing Part - Cold Saw Cut-off Machine - Run Out Table -
Auto Packing System - Roll Tooling - Electric Equipment
- Production Capacity
Round tubes : 95.54mm (3.76 inch) - 191.08mm (7.52 inch)
Square tubes : 75*75 - 125* 125
Rectangulur tubes 100*50 - 150*100
- Specification
1) Tension Strength : Max. 42.0 kg/mm
2) Coil Outer Diameter : Max. ø2,000 Min. ø1,500
3) Coil Inner Diameter : ø610 mm
4) Coil Width : Max. 600mm Min. 150mm
5) Tube Outer Diameter : Max. ø168.3 Min. ø50.8
6) Line Speed : Max. 60 Min. 20 m/min
7) Thickness : Max. 7.0 Min. 1.4 mm
8) Tube Cut Length : Max. 12,000 mm Min. 6,000mm
9) Elctrical Power Source : AC440V, 60Hz, 3P (Main)
10) Line Direction : L → R
11) Hydraulic Pressure : 150 kg/cm²
12) Year of Manufacture / Maker : 2019 / DMC
13) Welding Capacity : 500kW (HF Welder)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| forging-preform-trimming-and-sizing-presses-dmc-7-inch-tube-mill-p260818081_4.pdf | Download |
| forging-preform-trimming-and-sizing-presses-dmc-7-inch-tube-mill-p260818081_4.pdf | Download |
| forging-preform-trimming-and-sizing-presses-dmc-7-inch-tube-mill-p260818081_4.pdf | Download |
| forging-preform-trimming-and-sizing-presses-dmc-7-inch-tube-mill-p260818081_8.pdf | Download |
| forging-preform-trimming-and-sizing-presses-dmc-7-inch-tube-mill-p260818081_4.pdf | Download |
| forging-preform-trimming-and-sizing-presses-dmc-7-inch-tube-mill-p260818081_9.pdf | Download |
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Nov. 3, 2026 |
USED 7 INCH TUBE MILL
- Composition
Coil guide - Coil Lifting Car with Opener and Peeler - Uncoiler - Pinch Leveler - Auto Shear and End welder -
Rotary Accumulator - Forming Entry Part - Forming Part - Welding Part - HF Welder Cooling System -
Cooling Bath - Emulsion Cooling System - Sizing Part - Cold Saw Cut-off Machine - Run Out Table -
Auto Packing System - Roll Tooling - Electric Equipment
- Production Capacity
Round tubes : 95.54mm (3.76 inch) - 191.08mm (7.52 inch)
Square tubes : 75*75 - 125* 125
Rectangulur tubes 100*50 - 150*100
- Specification
1) Tension Strength : Max. 42.0 kg/mm
2) Coil Outer Diameter : Max. ø2,000 Min. ø1,500
3) Coil Inner Diameter : ø610 mm
4) Coil Width : Max. 600mm Min. 150mm
5) Tube Outer Diameter : Max. ø168.3 Min. ø50.8
6) Line Speed : Max. 60 Min. 20 m/min
7) Thickness : Max. 7.0 Min. 1.4 mm
8) Tube Cut Length : Max. 12,000 mm Min. 6,000mm
9) Elctrical Power Source : AC440V, 60Hz, 3P (Main)
10) Line Direction : L → R
11) Hydraulic Pressure : 150 kg/cm²
12) Year of Manufacture / Maker : 2019 / DMC
13) Welding Capacity : 500kW (HF Welder)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
USED 7-INCH PIPE BAND MACHINE
Overview
This is a band production line for manufacturing round, square, and rectangular pipes. The equipment includes all main sections for uncoiling coils, forming, welding, cooling, cutting, and packaging, as well as electrical and hydraulic equipment. The manufacturer and year of production are specified in the specifications.
Composition (main modules)
- Coil guide
- Coil lifting trolley with opener and peeler
- Uncoiler
- Pressing leveler
- Automatic cutting machine and end welding
- Rotary accumulator
- Forming entry section and forming section
- Welding section and high-frequency welding with cooling system
- Cooling bath and emulsion cooling system
- Sizing section
- Cold saw cutting machine
- Exit table
- Automatic packaging system
- Rolling tools
- Electrical equipment
Production capacity
- Round pipes: 95.54 mm (3.76 inches) – 191.08 mm (7.52 inches)
- Square pipes: 75×75 – 125×125
- Rectangular pipes: 100×50 – 150×100
Technical specifications
1) Tensile strength: Max. 42.0 kg/mm
2) Coil outer diameter: Max. ø2,000 Min. ø1,500
3) Coil inner diameter: ø610 mm
4) Coil width: Max. 600 mm Min. 150 mm
5) Pipe outer diameter: Max. ø168.3 Min. ø50.8
6) Line speed: Max. 60 Min. 20 m/min
7) Thickness: Max. 7.0 Min. 1.4 mm
8) Pipe cutting length: Max. 12,000 mm Min. 6,000 mm
9) Electrical source: AC440V, 60Hz, 3P (Main)
10) Line direction: L → D
11) Hydraulic pressure: 150 kg/cm²
12) Year of production / Manufacturer: 2019 / DMC
13) Welding capacity: 500 kW (HF welder)
Note
Description and specifications are based on the available data for the machine. No additional visual data are included in this description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 4 |
| Last activity | Nov. 3, 2026 |
Цялостно размотаващо устройство DMC 7 INCH TUBE MILL
Kompletní odvíjecí zařízení DMC 7 INCH TUBE MILL
DMC 7 INCH TUBE MILL Komplet afrulningsenhed
DMC 7 INCH TUBE MILL Komplette Abwickeleinheite
Ολοκληρωμένη μονάδα ξετύλιξης DMC 7 INCH TUBE MILL
DMC 7 INCH TUBE MILL Complete unwinding unit
Línea completas de desenrollo DMC 7 INCH TUBE MILL
Ligne complète de déroulage DMC 7 INCH TUBE MILL
Potpuna jedinica za odmotavanje DMC 7 INCH TUBE MILL
DMC 7 INCH TUBE MILL Komplett letekercselő egység
Aspo avvolgitore DMC 7 INCH TUBE MILL
DMC 7 INCH TUBE MILL Pilnas išvyniojimo įrenginys
DMC 7 INCH TUBE MILL Complete afwikkeleenheid
Maszyna rozwijająca blachę DMC 7 INCH TUBE MILL
Unidade de desenrolamento completa DMC 7 INCH TUBE MILL
Unitate completă de derulare DMC 7 INCH TUBE MILL
DMC 7 INCH TUBE MILL Размоточная рулонная установка
Kompletna jedinica za odmotavanje DMC 7 INCH TUBE MILL
DMC 7 INCH TUBE MILL Komplett avrullningsenhet
Komple Çözülüm Ünitesi DMC 7 INCH TUBE MILL
EN
- Languages
English (GB)