Contact us to receive an offer.
| Manufacturer | Demag |
|---|---|
| Model | systec 160/520-430 |
| Year | 2010 |
| Location | Slovakia
|
This Sumitomo Demag Systec 160/520-430 injection moulding machine is a robust and precise industrial machine designed for efficient plastic injection molding. It features a clamping force of 1600 kN, with a mould closing force of 1760 kN, ensuring secure mould clamping during operation. The machine offers a maximum opening stroke of 500 mm and supports mould heights ranging from a minimum of 275 mm to a maximum of 585 mm, extendable to 685 mm with an optional WA (wide opening) feature. The maximum daylight between platens is 1085 mm, extendable to 1185 mm with WA. The platen size measures 770 mm by 770 mm, and the tie bar spacing is 520 mm both horizontally and vertically, providing a stable and spacious mould area. It can accommodate mould weights up to 2200 kg, with a maximum weight of 1300 kg on the moving platen and 1700 kg on the fixed platen.
The ejector system includes an ejector stroke of 160 mm, with an ejector force of 59 kN and a return force of 29 kN. The injection unit has a screw diameter of 40 mm and a length-to-diameter ratio of 20. It operates at an injection pressure of 2025 bar, with a shot volume of 231 cm³ and a shot weight of 210 g (polystyrene). The maximum dosing stroke is 184 mm, and the nozzle stroke is 400 mm, with a nozzle immersion of 20 mm and a nozzle contact force of 80 kN. Barrel heating power for the 40 mm screw diameter is 11.1 kW, and the machine is equipped with a bi-metal screw. The material hopper capacity is 35 liters.
The machine has a total weight of 6800 kg (without oil) and overall dimensions of approximately 5.3 m length, 1.6 m width, and 2.1 m height. It includes an oil tank capacity of 400 liters and pump motors rated at 22, 30, and 30 kW. The total installed power ranges between 31.4 kW and 41.3 kW depending on configuration. The noise level ranges from 68 to 71 dB(A).
From the images, the machine appears clean and well-maintained with no visible damage or rust. It features a large transparent safety door with a handle for easy access to the mould area and an electric control panel with multiple buttons and a display located on the right side. The injection unit, including the barrel, screw, and feeding hopper, is mounted on the right side. The machine shows some minor surface wear but no significant damage, indicating good physical condition. This machine is not equipped with a robot.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Sumitomo Demag Systec 160/520 – Injection Unit 430 CLAMPING UNIT Clamping force: 1600 kN Mould closing force: 1760 kN Max. opening stroke: 500 mm Min. mould height: 275 mm Max. mould height: 585 mm (685 mm with WA) Max. daylight between platens: 1085 mm (1185 mm with WA) Platen size: 770 × 770 mm Distance between tie bars: 520 × 520 mm Max. mould weight: 2200 kg Max. weight on moving platen: 1300 kg Max. weight on fixed platen: 1700 kg EJECTOR Ejector stroke: 160 mm Ejector force: 59 kN Ejector return force: 29 kN INJECTION UNIT 430 L/D ratio: 20 Screw Ø40 mm Injection pressure: 2025 bar Shot volume: 231 cm³ Shot weight (PS): 210 g Max. dosing stroke: 184 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating power: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Electric screw drive (WA): 22 kW Material hopper capacity: 35 l MACHINE OVERALL Oil tank capacity: 400 l Pump motors: 22 / 30 / 30 kW Total installed power: 31.4 / 39.4 / 39.4 kW 33.1 / 41.1 / 41.1 kW 33.3 / 41.3 / 41.3 kW EUROMAP 6 (dry cycle): 1.95–364 / 1.75–364 / 1.75–364 Machine weight (without oil): 6800 kg Dimensions (L × W × H): 5.3 × 1.6 × 2.1 m Noise level: 68 / 71 / 68 dB(A)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 48 |
| Last activity | Oct. 29, 2026 |
Sumitomo Demag Systec 160/520 – Injection Unit 430 CLAMPING UNIT Clamping force: 1600 kN Mould closing force: 1760 kN Max. opening stroke: 500 mm Min. mould height: 275 mm Max. mould height: 585 mm (685 mm with WA) Max. daylight between platens: 1085 mm (1185 mm with WA) Platen size: 770 × 770 mm Distance between tie bars: 520 × 520 mm Max. mould weight: 2200 kg Max. weight on moving platen: 1300 kg Max. weight on fixed platen: 1700 kg EJECTOR Ejector stroke: 160 mm Ejector force: 59 kN Ejector return force: 29 kN INJECTION UNIT 430 L/D ratio: 20 Screw Ø40 mm Injection pressure: 2025 bar Shot volume: 231 cm³ Shot weight (PS): 210 g Max. dosing stroke: 184 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating power: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Electric screw drive (WA): 22 kW Material hopper capacity: 35 l MACHINE OVERALL Oil tank capacity: 400 l Pump motors: 22 / 30 / 30 kW Total installed power: 31.4 / 39.4 / 39.4 kW 33.1 / 41.1 / 41.1 kW 33.3 / 41.3 / 41.3 kW EUROMAP 6 (dry cycle): 1.95–364 / 1.75–364 / 1.75–364 Machine weight (without oil): 6800 kg Dimensions (L × W × H): 5.3 × 1.6 × 2.1 m Noise level: 68 / 71 / 68 dB(A)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Sumitomo Demag Systec 160/520-430 injection moulding machine is a robust and precise industrial machine designed for efficient plastic injection molding. It features a clamping force of 1600 kN, with a mould closing force of 1760 kN, ensuring secure mould clamping during operation. The machine offers a maximum opening stroke of 500 mm and supports mould heights ranging from a minimum of 275 mm to a maximum of 585 mm, extendable to 685 mm with an optional WA (wide opening) feature. The maximum daylight between platens is 1085 mm, extendable to 1185 mm with WA. The platen size measures 770 mm by 770 mm, and the tie bar spacing is 520 mm both horizontally and vertically, providing a stable and spacious mould area. It can accommodate mould weights up to 2200 kg, with a maximum weight of 1300 kg on the moving platen and 1700 kg on the fixed platen.
The ejector system includes an ejector stroke of 160 mm, with an ejector force of 59 kN and a return force of 29 kN. The injection unit has a screw diameter of 40 mm and a length-to-diameter ratio of 20. It operates at an injection pressure of 2025 bar, with a shot volume of 231 cm³ and a shot weight of 210 g (polystyrene). The maximum dosing stroke is 184 mm, and the nozzle stroke is 400 mm, with a nozzle immersion of 20 mm and a nozzle contact force of 80 kN. Barrel heating power for the 40 mm screw diameter is 11.1 kW, and the machine is equipped with a bi-metal screw. The material hopper capacity is 35 liters.
The machine has a total weight of 6800 kg (without oil) and overall dimensions of approximately 5.3 m length, 1.6 m width, and 2.1 m height. It includes an oil tank capacity of 400 liters and pump motors rated at 22, 30, and 30 kW. The total installed power ranges between 31.4 kW and 41.3 kW depending on configuration. The noise level ranges from 68 to 71 dB(A).
From the images, the machine appears clean and well-maintained with no visible damage or rust. It features a large transparent safety door with a handle for easy access to the mould area and an electric control panel with multiple buttons and a display located on the right side. The injection unit, including the barrel, screw, and feeding hopper, is mounted on the right side. The machine shows some minor surface wear but no significant damage, indicating good physical condition. This machine is not equipped with a robot.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 48 |
| Last activity | Oct. 29, 2026 |
Машина за леене под налягане Demag systec 160/520-430
Vstřikolis Demag systec 160/520-430
Demag systec 160/520-430 Sprøjtestøbemaskine
Demag systec 160/520-430 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Demag systec 160/520-430
Demag systec 160/520-430 Injection moulding machine
Inyectora de plástico Demag systec 160/520-430
Presse à injecter Demag systec 160/520-430
Stroj za injekcijsko prešanje Demag systec 160/520-430
Demag systec 160/520-430 Fröccsöntő gép
Pressa ad iniezione Demag systec 160/520-430
Įpurškimo formavimo mašina Demag systec 160/520-430
Demag systec 160/520-430 Spuitgietmachine
Wtryskarka Demag systec 160/520-430
Máquina de injecção Demag systec 160/520-430
Mașină de turnat prin injecție Demag systec 160/520-430
Demag systec 160/520-430 Термопластавтомат
Mašina za brizganje Demag systec 160/520-430
Demag systec 160/520-430 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Demag systec 160/520-430
EN
- Languages
English (GB)