| Manufacturer | DECKEL MAHO |
|---|---|
| Model | DMU 80 P |
| Year | 1999 |
| Location | Belarus
|
This DECKEL MAHO DMU 80 P is a vertical 5-axis machining center manufactured in 1999, designed for versatile and precise machining tasks. It features a working range with X, Y, and Z axes measuring 600 mm, 650 mm, and 550 mm respectively, allowing for substantial machining volume. The machine is equipped with a powerful spindle capable of speeds up to 18,000 rpm, supporting a wide range of machining applications.
The tool magazine accommodates 60 tool pockets, each capable of holding tools up to 100 mm in diameter and a maximum weight of 10 kg, with an overall magazine capacity of approximately 200 kg. The tool holder type is SK-40, facilitating compatibility with various tooling options.
This machining center includes an NC tilting rotary table with A and C axes, featuring a diameter of 630 mm and nine T-slots spaced 63 mm apart. It supports workpieces weighing up to 7,500 kg, enhancing its capability for heavy-duty machining.
Control is managed via the DMG MILL PLUS system, providing precise control over spindle speeds ranging from 20 to 18,000 rpm and feed rates from 0.1 mm/min up to 10,000 mm/min on the X, Y, and Z axes. The C-axis offers rotational speeds up to 3,600 degrees per minute, and the A-axis up to 2,600 degrees per minute, with minimum programmable feed rates down to 0.1 degrees/min for the C-axis.
Additional equipment includes a chip conveyor, automatic belt filter, hydraulic unit, and a crossbar designed for unloading with a crane, facilitating efficient operation and maintenance.
The machine's exterior shows some signs of wear consistent with use but appears intact and functional. The machining center features a large viewing window on the door for monitoring operations and an emergency stop button on the control panel for safety.
Electrical specifications include a total connected power of 45 kVA, rated current of 65 A, operating voltage of 400 V, frequency of 50 Hz, and control voltage of 24 V.
Overall, this DECKEL MAHO DMU 80 P machining center offers robust capabilities for complex 5-axis machining tasks with comprehensive tooling and control features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
• Total connected power: 45 kVA
• Rated current: 65 A
• Operating voltage: 400 V
• Frequency: 50 Hz
• Control voltage: 24 V
• Read operating hours: 34,477 hours
• Spindle operating hours: 17,530 hours
• Control system: DMG MILL PLUS
• Spindle speed: up to 18,000 rpm
• Working range:
o X-axis: 600 mm
o Y-axis: 650 mm
o Z-axis: 550 mm
• Tool holder type: SK-40
• Spindle speed: 20 to 18,000 rpm
• Feed range of X, Y and Z-axes: 20 to 10,000 mm/min
• C-axis: 1 to 3,600 degrees/min
• Including C-axis
• A-axis: 1 to 2600 degrees/min
• Minimum programmable feed rate in X, Y and Z: 0.1 mm/min
• C-axis: 0.1 degrees/min
• Rapid traverse in X, Y and Z: 24 m/min
• C-axis: 10.7 rpm
• A-axis: 7.3 rpm
• Measuring system: Resolution in X, Y and Z: 0.001 mm
• Including NC tilting rotary table (A and C-axis)
o Diameter: 630 mm
o With 9 T-slots
o Distance between T-slots: 63 mm
o Workpiece weight: up to 7500 kg
• Tool magazine with 60 stations
o Tool diameter: 100 mm
o Maximum tool weight: 10 kg
o Maximum tool weight in magazine: approx. 200 kg
• Equipment: chip conveyor, automatic belt filter and hydraulic unit
• Including crossbar for unloading by crane
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machining center is this DECKEL MAHO DMU 80 P?
This DECKEL MAHO DMU 80 P is a 5-axis machining center.
When was this DECKEL MAHO DMU 80 P manufactured?
This DECKEL MAHO DMU 80 P was manufactured in 1999.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | June 11, 2026 |
• Total connected power: 45 kVA
• Rated current: 65 A
• Operating voltage: 400 V
• Frequency: 50 Hz
• Control voltage: 24 V
• Read operating hours: 34,477 hours
• Spindle operating hours: 17,530 hours
• Control system: DMG MILL PLUS
• Spindle speed: up to 18,000 rpm
• Working range:
o X-axis: 600 mm
o Y-axis: 650 mm
o Z-axis: 550 mm
• Tool holder type: SK-40
• Spindle speed: 20 to 18,000 rpm
• Feed range of X, Y and Z-axes: 20 to 10,000 mm/min
• C-axis: 1 to 3,600 degrees/min
• Including C-axis
• A-axis: 1 to 2600 degrees/min
• Minimum programmable feed rate in X, Y and Z: 0.1 mm/min
• C-axis: 0.1 degrees/min
• Rapid traverse in X, Y and Z: 24 m/min
• C-axis: 10.7 rpm
• A-axis: 7.3 rpm
• Measuring system: Resolution in X, Y and Z: 0.001 mm
• Including NC tilting rotary table (A and C-axis)
o Diameter: 630 mm
o With 9 T-slots
o Distance between T-slots: 63 mm
o Workpiece weight: up to 7500 kg
• Tool magazine with 60 stations
o Tool diameter: 100 mm
o Maximum tool weight: 10 kg
o Maximum tool weight in magazine: approx. 200 kg
• Equipment: chip conveyor, automatic belt filter and hydraulic unit
• Including crossbar for unloading by crane
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What type of machining center is this DECKEL MAHO DMU 80 P?
This DECKEL MAHO DMU 80 P is a 5-axis machining center.
When was this DECKEL MAHO DMU 80 P manufactured?
This DECKEL MAHO DMU 80 P was manufactured in 1999.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This DECKEL MAHO DMU 80 P is a vertical 5-axis machining center manufactured in 1999, designed for versatile and precise machining tasks. It features a working range with X, Y, and Z axes measuring 600 mm, 650 mm, and 550 mm respectively, allowing for substantial machining volume. The machine is equipped with a powerful spindle capable of speeds up to 18,000 rpm, supporting a wide range of machining applications.
The tool magazine accommodates 60 tool pockets, each capable of holding tools up to 100 mm in diameter and a maximum weight of 10 kg, with an overall magazine capacity of approximately 200 kg. The tool holder type is SK-40, facilitating compatibility with various tooling options.
This machining center includes an NC tilting rotary table with A and C axes, featuring a diameter of 630 mm and nine T-slots spaced 63 mm apart. It supports workpieces weighing up to 7,500 kg, enhancing its capability for heavy-duty machining.
Control is managed via the DMG MILL PLUS system, providing precise control over spindle speeds ranging from 20 to 18,000 rpm and feed rates from 0.1 mm/min up to 10,000 mm/min on the X, Y, and Z axes. The C-axis offers rotational speeds up to 3,600 degrees per minute, and the A-axis up to 2,600 degrees per minute, with minimum programmable feed rates down to 0.1 degrees/min for the C-axis.
Additional equipment includes a chip conveyor, automatic belt filter, hydraulic unit, and a crossbar designed for unloading with a crane, facilitating efficient operation and maintenance.
The machine's exterior shows some signs of wear consistent with use but appears intact and functional. The machining center features a large viewing window on the door for monitoring operations and an emergency stop button on the control panel for safety.
Electrical specifications include a total connected power of 45 kVA, rated current of 65 A, operating voltage of 400 V, frequency of 50 Hz, and control voltage of 24 V.
Overall, this DECKEL MAHO DMU 80 P machining center offers robust capabilities for complex 5-axis machining tasks with comprehensive tooling and control features.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Consultant / Intermediary |
| Active since | 2024 |
| Offers online | 1 |
| Last activity | June 11, 2026 |
Обработващ център - 5 ос DECKEL MAHO DMU 80 P
Obráběcí centrum - 5 osé DECKEL MAHO DMU 80 P
DECKEL MAHO DMU 80 P Bearbejdningscenter - 5 akset
DECKEL MAHO DMU 80 P Bearbeitungszentrum 5-Achsen
Κέντρο μηχανικής κατεργασίας - 5 άξονες DECKEL MAHO DMU 80 P
DECKEL MAHO DMU 80 P Machining center - 5 axis
Centro de mecanizado 5 ejes DECKEL MAHO DMU 80 P
Centre d'usinage 5 axes DECKEL MAHO DMU 80 P
Obradni centar - 5 osi DECKEL MAHO DMU 80 P
DECKEL MAHO DMU 80 P Megmunkáló központ - 5 tengely
Centro di lavoro 5 assi DECKEL MAHO DMU 80 P
Apdirbimo centras – 5 ašių DECKEL MAHO DMU 80 P
DECKEL MAHO DMU 80 P Bewerkingscentrum - 5 assen
Centrum obróbcze 5osi DECKEL MAHO DMU 80 P
Centro de usinagem - 5 eixos DECKEL MAHO DMU 80 P
Centru de prelucrare - 5 axe DECKEL MAHO DMU 80 P
В продаже Обрабатывающий центр с ЧПУ DECKEL MAHO DMU 80 P – 5 axis (вертикальный)
Obradni centar - 5 os DECKEL MAHO DMU 80 P
DECKEL MAHO DMU 80 P Bearbetningscentrum - 5-axligt
5 eksenli işleme merkezi DECKEL MAHO DMU 80 P
EN
- Languages
English (GB)