Contact us to receive an offer.
| Manufacturer | DECKEL |
|---|---|
| Model | FP 1 |
| Year | 1979 |
| Location | Germany
|
This listing is for a DECKEL FP 1 universal tool milling machine, manufactured in 1979. It features manual travel ranges of 300 mm on the X axis, 160 mm on the Y axis, and 330 mm on the Z axis, providing versatile machining capabilities. The machine is equipped with a fixed angle table measuring 600 x 210 mm, suitable for various workpieces. The spindle mount is SK 40 - S20x2, with a maximum spindle speed of 2000 rpm across 16 steps, driven by a spindle motor rated at 1.8 kW. The feed rates for the X and Y axes range from 5 to 500 mm/min, with a rapid traverse speed of 1200 mm/min. The machine operates on a 380-volt, 50 Hz mains connection and features stepless feed in the X and Z axes, spindle speed control via two motor speeds and eight gear stages, and a spindle pin displacement of 60 mm on the vertical milling head. The vertical milling head can swivel and extend horizontally up to 100 mm. Additional features include a coolant device integrated into the machine base, an adjacent control cabinet, and an original chip tray designed to fit on the machine base. The overall dimensions of the machine are 1350 mm in length, 1100 mm in width, and 1700 mm in height, with a weight of approximately 770 kg. Visual inspection shows the machine has signs of wear and paint chipping, particularly near the base, and some areas of rust. The machine is painted green and includes three hand wheels for manual positioning of the table and head. A flexible coolant hose is attached near the spindle head. The electrical cabinet is located on the side and includes an emergency stop button. A power cable with an industrial plug is visible. An electrical plan is available with the machine. This milling machine is suitable for users seeking a versatile manual milling solution with a range of feed and speed options.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: DECKEL
Type: FP 1
Year of construction: 1979
Universal tool milling machine DECKEL type FP 1
Travels manual X: 300 mm Y: 160 mm Z: 330 mm
Table size 600 x 210 mm
Spindle mount SK 40 - S20x2
Spindle speed 40-2000 rpm 16 steps
Feed X and Y axis 5 to 500 mm/min
Rapid traverse 1200 mm/min.
Motor power 1.4 and 1.8 kW pole-changing
Mains connection 380 volts, 50 Hz
- stepless feed in the X and Z axes
- spindle speed over 2 motor speeds and 8 gear stages
- spindle pin displacement on the vertical milling head 60 mm
- vertical milling head swivels and 100 mm horizontally extendable
- fixed angle table 600 x 210 mm
- coolant device in the machine base
- adjacent control cabinet
- original chip tray to put on the machine base
- electrical plan available
Space requirement L x W x H 1350 x 1100 x 1700 mm
Weight 770 kg
very good condition
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 85 |
| Last activity | Nov. 4, 2026 |
Manufacturer: DECKEL
Type: FP 1
Year of construction: 1979
Universal tool milling machine DECKEL type FP 1
Travels manual X: 300 mm Y: 160 mm Z: 330 mm
Table size 600 x 210 mm
Spindle mount SK 40 - S20x2
Spindle speed 40-2000 rpm 16 steps
Feed X and Y axis 5 to 500 mm/min
Rapid traverse 1200 mm/min.
Motor power 1.4 and 1.8 kW pole-changing
Mains connection 380 volts, 50 Hz
- stepless feed in the X and Z axes
- spindle speed over 2 motor speeds and 8 gear stages
- spindle pin displacement on the vertical milling head 60 mm
- vertical milling head swivels and 100 mm horizontally extendable
- fixed angle table 600 x 210 mm
- coolant device in the machine base
- adjacent control cabinet
- original chip tray to put on the machine base
- electrical plan available
Space requirement L x W x H 1350 x 1100 x 1700 mm
Weight 770 kg
very good condition
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing is for a DECKEL FP 1 universal tool milling machine, manufactured in 1979. It features manual travel ranges of 300 mm on the X axis, 160 mm on the Y axis, and 330 mm on the Z axis, providing versatile machining capabilities. The machine is equipped with a fixed angle table measuring 600 x 210 mm, suitable for various workpieces. The spindle mount is SK 40 - S20x2, with a maximum spindle speed of 2000 rpm across 16 steps, driven by a spindle motor rated at 1.8 kW. The feed rates for the X and Y axes range from 5 to 500 mm/min, with a rapid traverse speed of 1200 mm/min. The machine operates on a 380-volt, 50 Hz mains connection and features stepless feed in the X and Z axes, spindle speed control via two motor speeds and eight gear stages, and a spindle pin displacement of 60 mm on the vertical milling head. The vertical milling head can swivel and extend horizontally up to 100 mm. Additional features include a coolant device integrated into the machine base, an adjacent control cabinet, and an original chip tray designed to fit on the machine base. The overall dimensions of the machine are 1350 mm in length, 1100 mm in width, and 1700 mm in height, with a weight of approximately 770 kg. Visual inspection shows the machine has signs of wear and paint chipping, particularly near the base, and some areas of rust. The machine is painted green and includes three hand wheels for manual positioning of the table and head. A flexible coolant hose is attached near the spindle head. The electrical cabinet is located on the side and includes an emergency stop button. A power cable with an industrial plug is visible. An electrical plan is available with the machine. This milling machine is suitable for users seeking a versatile manual milling solution with a range of feed and speed options.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 85 |
| Last activity | Nov. 4, 2026 |
Looking for a used Deckel FP universal milling machine?
The Deckel FP series includes highly precise universal milling machines renowned for their mechanical accuracy, rigidity, and versatility. Widely used in toolrooms, prototyping, and precision machining environments, FP machines are valued for their ability to perform complex milling operations with exceptional control.
At Exapro, we connect buyers with verified sellers offering Deckel FP machines in multiple configurations, suitable for manual and CNC-assisted milling across a wide range of materials.
Browse all Deckel FP universal milling machines available on Exapro today.
универсална фреза DECKEL FP 1
Rovinná frézka univerzální DECKEL FP 1
DECKEL FP 1 universal fræsemaskine
DECKEL FP 1 Fräsmaschine Universal
μηχανή άλεσης γενικής χρήσης DECKEL FP 1
DECKEL FP 1 universal milling machine
Fresadora universal DECKEL FP 1
Fraiseuse universelle DECKEL FP 1
univerzalna glodalica DECKEL FP 1
DECKEL FP 1 univerzális marógép
Fresatrice universale DECKEL FP 1
universali frezavimo stakle DECKEL FP 1
DECKEL FP 1 universele freesmachine
Frezarka uniwersalna DECKEL FP 1
fresadora universal DECKEL FP 1
mașină de frezat universală DECKEL FP 1
DECKEL FP 1 Универсальный й станок
univerzalna glodalica DECKEL FP 1
DECKEL FP 1 universalfräsmaskin
universal freze makinesi DECKEL FP 1
EN
- Languages
English (GB)