| Manufacturer | Danobat Overbeck |
|---|---|
| Model | ID-400 |
| Year | 2021 |
| Location | Germany
|
CNC Internal Grinding Machine – Danobat Overbeck ID-400
Manufacturer: Danobat Overbeck
Model: ID-400
Year of manufacture: 2021
CNC control: Siemens 840D SL
Condition: Very good
Inspection: Available under power at the factory
The machine has a natural granite bed and an HVX high-frequency grinding spindle. The spindle motor power is 7 kW, with a stated spindle speed of 75,000 rpm. The machine is prepared for an additional HVX high-frequency grinding spindle rated at 3 kW and 90,000 rpm.
Grinding and workpiece specifications:
- Internal grinding diameter: 200 mm
- Grinding length: 200 mm
- Maximum work length, including chucking system: 400 mm
- Maximum workpiece weight, including chuck: 500 kg
- Center height, factory specification: 230 mm
- Measured center height: 270 mm
Axis specifications:
- X-axis stroke: 425 mm; minimum resolution: 0.0001 mm; feed rate: 1–25,000 mm/min; linear motor drive
- Z-axis stroke: 475 mm; minimum resolution: 0.0001 mm; feed rate: 1–25,000 mm/min; linear motor drive
- W-axis: Manual work-head adjustment with 200 mm displacement
The machine is equipped with a Stiefelmayer 450 precision axial swivel chuck. Its dressing device is a diamond roller system for a profile dressing wheel or diamond dressing roll. The dressing device supports both-side mounting and has a Siemens servo drive, process monitoring and control, and integration into the machine control system.
Cooling equipment for the linear motor drives, torque motors, spindles and electrical cabinet is included, as is the coolant lubricant system. Machine protection consists of a full enclosure with a sliding door.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
CNC Internal Grinding Machine Danobat Overbeck ID-400
Manufacturer: Danobat Overbeck
Model: ID-400
Year of manufacture: 2021
CNC control: Siemens 840D SL
Condition: Very good
Inspection: Available under power at the factory
Center height, factory specification: 230 mm
Measured center height: 270 mm
Internal grinding diameter: 200 mm
Grinding length: 200 mm
Maximum work length, including chucking system: 400 mm
Maximum workpiece weight, including chuck: 500 kg
X-axis stroke: 425 mm
X-axis resolution: Minimum 0.0001 mm
X-axis feed rate: 1–25,000 mm/min
X-axis drive: Linear motor
Z-axis stroke: 475 mm
Z-axis resolution: Minimum 0.0001 mm
Z-axis feed rate: 1–25,000 mm/min
Z-axis drive: Linear motor
High-frequency grinding spindle: HVX
Grinding spindle motor power: 7 kW
Grinding spindle speed: 75,000 rpm
Additional spindle preparation: Prepared for an HVX high-frequency grinding spindle rated at 3 kW and 90,000 rpm
Machine bed: Natural granite
W-axis: Manual work-head adjustment with 200 mm displacement
Chuck: Stiefelmayer 450 precision axial swivel chuck
Dressing device: Diamond roller dressing device for a profile dressing wheel or diamond dressing roll
Dressing device features: Both-side mounting, Siemens servo drive, process monitoring and control, fully integrated into the machine control system
Cooling: Cooling unit for linear motor drives, torque motors, spindles and electrical cabinet
Coolant lubricant system: Included
Machine protection: Full enclosure with sliding door
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Does this Danobat Overbeck ID-400 include a B-axis for radius grinding?
This Danobat Overbeck ID-400 lacks the B-axis required for radius-grinding applications.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 40 |
| Last activity | Nov. 7, 2026 |
CNC Internal Grinding Machine Danobat Overbeck ID-400
Manufacturer: Danobat Overbeck
Model: ID-400
Year of manufacture: 2021
CNC control: Siemens 840D SL
Condition: Very good
Inspection: Available under power at the factory
Center height, factory specification: 230 mm
Measured center height: 270 mm
Internal grinding diameter: 200 mm
Grinding length: 200 mm
Maximum work length, including chucking system: 400 mm
Maximum workpiece weight, including chuck: 500 kg
X-axis stroke: 425 mm
X-axis resolution: Minimum 0.0001 mm
X-axis feed rate: 1–25,000 mm/min
X-axis drive: Linear motor
Z-axis stroke: 475 mm
Z-axis resolution: Minimum 0.0001 mm
Z-axis feed rate: 1–25,000 mm/min
Z-axis drive: Linear motor
High-frequency grinding spindle: HVX
Grinding spindle motor power: 7 kW
Grinding spindle speed: 75,000 rpm
Additional spindle preparation: Prepared for an HVX high-frequency grinding spindle rated at 3 kW and 90,000 rpm
Machine bed: Natural granite
W-axis: Manual work-head adjustment with 200 mm displacement
Chuck: Stiefelmayer 450 precision axial swivel chuck
Dressing device: Diamond roller dressing device for a profile dressing wheel or diamond dressing roll
Dressing device features: Both-side mounting, Siemens servo drive, process monitoring and control, fully integrated into the machine control system
Cooling: Cooling unit for linear motor drives, torque motors, spindles and electrical cabinet
Coolant lubricant system: Included
Machine protection: Full enclosure with sliding door
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Does this Danobat Overbeck ID-400 include a B-axis for radius grinding?
This Danobat Overbeck ID-400 lacks the B-axis required for radius-grinding applications.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
CNC Internal Grinding Machine – Danobat Overbeck ID-400
Manufacturer: Danobat Overbeck
Model: ID-400
Year of manufacture: 2021
CNC control: Siemens 840D SL
Condition: Very good
Inspection: Available under power at the factory
The machine has a natural granite bed and an HVX high-frequency grinding spindle. The spindle motor power is 7 kW, with a stated spindle speed of 75,000 rpm. The machine is prepared for an additional HVX high-frequency grinding spindle rated at 3 kW and 90,000 rpm.
Grinding and workpiece specifications:
- Internal grinding diameter: 200 mm
- Grinding length: 200 mm
- Maximum work length, including chucking system: 400 mm
- Maximum workpiece weight, including chuck: 500 kg
- Center height, factory specification: 230 mm
- Measured center height: 270 mm
Axis specifications:
- X-axis stroke: 425 mm; minimum resolution: 0.0001 mm; feed rate: 1–25,000 mm/min; linear motor drive
- Z-axis stroke: 475 mm; minimum resolution: 0.0001 mm; feed rate: 1–25,000 mm/min; linear motor drive
- W-axis: Manual work-head adjustment with 200 mm displacement
The machine is equipped with a Stiefelmayer 450 precision axial swivel chuck. Its dressing device is a diamond roller system for a profile dressing wheel or diamond dressing roll. The dressing device supports both-side mounting and has a Siemens servo drive, process monitoring and control, and integration into the machine control system.
Cooling equipment for the linear motor drives, torque motors, spindles and electrical cabinet is included, as is the coolant lubricant system. Machine protection consists of a full enclosure with a sliding door.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2004 |
| Offers online | 40 |
| Last activity | Nov. 7, 2026 |
Цилиндрична шлифовъчна машина Danobat Overbeck ID-400
Válcová bruska Danobat Overbeck ID-400
Danobat Overbeck ID-400 Rundslibemaskine
Danobat Overbeck ID-400 Rundschleifmaschine
Κυλινδρική μηχανή λείανσης Danobat Overbeck ID-400
Danobat Overbeck ID-400 Cylindrical grinding machine
Rectificadora cilíndrica Danobat Overbeck ID-400
Rectifieuse cylindrique Danobat Overbeck ID-400
Cilindrična brusilica Danobat Overbeck ID-400
Danobat Overbeck ID-400 Palástköszörű gép
Rettificatrice cilindrica Danobat Overbeck ID-400
Danobat Overbeck ID-400 Cilindrinio šlifavimo staklės
Danobat Overbeck ID-400 Rondslijpmachine
Szlifierka cylindryczna Danobat Overbeck ID-400
Retificadora cilíndrica Danobat Overbeck ID-400
Mașină de rectificat cilindrică Danobat Overbeck ID-400
Danobat Overbeck ID-400 Цилиндрический шлифовальный станок
Cilindrična brusilica Danobat Overbeck ID-400
Danobat Overbeck ID-400 Rundslipmaskin
Silindirik taşlama makinesi Danobat Overbeck ID-400
EN
- Languages
English (GB)