Contact us to receive an offer.
| Manufacturer | DAI HYUN |
|---|---|
| Model | 1400 mm |
| Year | 1994 |
| Location | Germany
|
Dai Hyun steel coil slitting line, built in 1994. The line is specified for processing hot- and cold-rolled steel coil, hot-dip galvanized steel, and carbon steel. Its line direction is left to right, and the stated strip width is 1,400 mm. The listed strip thickness range is 0.8–6.0 mm. Maximum coil weight is 24 MT. The uncoiler is listed with liner sizes of Ø480 mm and Ø600 mm; coil diameters are Ø1,000 mm and Ø2,000 mm. The recoiler inside diameters are Ø500 mm and Ø760 mm.
The stated slitting speed is 50–100 m/min, with an edging width of 3–10 mm. The minimum slit width is listed as 40 mm for material thicknesses of 1.0–2.5 mm. The capacity table gives the following operating details: for 1.0–1.9 mm thickness, 16 cuts, 15 strips, and 70–90 m/min; for 2.0–2.9 mm, 14 cuts, 13 strips, and 70–80 m/min; for 3.0–4.0 mm, 12 cuts, 11 strips, and 60–70 m/min; for 4.1–5.0 mm, 7 cuts, 6 strips, and 60–70 m/min; and for 5.0–6.3 mm, 5 cuts, 4 strips, and 50–60 m/min. These capacity-table ranges are presented as specified.
Listed equipment and components include an infeed coil car, decoiler, opener and press-down roll, three rolls with pinch roll and hydraulic shear, roller table, pinch rolls and side guide, two slitters, two scrap winders, loop table, tension pad, leveler, tension roll, two separators, recoiler, outfeed coil car, and pusher plate.
Electrical details are listed as 400 V, 50 Hz input and 220 VAC, 50 Hz, three-phase drive power with ±10% tolerance. Control voltage is 110 VAC, 50 Hz, single phase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Mfc.: Dai Hyun, Built: 1994
Material to Slit: Hot & cold rolled steel coil, Hot deep galvanized steel, Carbon steel
Line Direction: left to right
Strip Width: 1400 mm, Thickness: 0.8 - 6.0 mm
Max. Coil weight: 24 MT
Un-coiler ID with Liner: Ø 480 mm, Ø 600 mm
Coil Dia.: Ø 1000 & Ø 2000 mm, Re-coiler Inside Dia.: Ø 500 mm, Ø 760 mm
Slitting Speed: 50-100 m/min, Edging width: 3 mm to 10 mm
Electric Power: Input voltage: 400 V, 50 Hz - 220 VAC, 50 Hz,3 Ph. ± l 0% for drive
Control Voltage: 110 VAC, 50 Hz, 1 Ph.
Slitting capacity
Working speed and No. of cuts Min. slit width is 40 mm at thickness 1.0 – 2.5 mm.
Strip thickness No. of cuts No. of strips Line speed
mm m/min
1.0 - 1.9 16 15 70-90
2.0 - 2.9 14 13 70-80
3.0 – 4.0 12 11 60-70
4.1 – 5.0 7 6 60-70
5.0 – 6.3 5 4 50-60
Consist of: Coil Car In De-coiler Opener & Press - Down Roll
Three Rolls with Pinch Roll & Hydraulic Shear Roller Table
Pinch Rolls & Side Guide Slitter 2 no’s Scrap Winder 2no’s
Loop Table Tension Pad Leveler Tension Roll
Separator 2no’s Re-coiler Coil Car Out Pusher Plate
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 33 |
| Last activity | Oct. 30, 2026 |
Mfc.: Dai Hyun, Built: 1994
Material to Slit: Hot & cold rolled steel coil, Hot deep galvanized steel, Carbon steel
Line Direction: left to right
Strip Width: 1400 mm, Thickness: 0.8 - 6.0 mm
Max. Coil weight: 24 MT
Un-coiler ID with Liner: Ø 480 mm, Ø 600 mm
Coil Dia.: Ø 1000 & Ø 2000 mm, Re-coiler Inside Dia.: Ø 500 mm, Ø 760 mm
Slitting Speed: 50-100 m/min, Edging width: 3 mm to 10 mm
Electric Power: Input voltage: 400 V, 50 Hz - 220 VAC, 50 Hz,3 Ph. ± l 0% for drive
Control Voltage: 110 VAC, 50 Hz, 1 Ph.
Slitting capacity
Working speed and No. of cuts Min. slit width is 40 mm at thickness 1.0 – 2.5 mm.
Strip thickness No. of cuts No. of strips Line speed
mm m/min
1.0 - 1.9 16 15 70-90
2.0 - 2.9 14 13 70-80
3.0 – 4.0 12 11 60-70
4.1 – 5.0 7 6 60-70
5.0 – 6.3 5 4 50-60
Consist of: Coil Car In De-coiler Opener & Press - Down Roll
Three Rolls with Pinch Roll & Hydraulic Shear Roller Table
Pinch Rolls & Side Guide Slitter 2 no’s Scrap Winder 2no’s
Loop Table Tension Pad Leveler Tension Roll
Separator 2no’s Re-coiler Coil Car Out Pusher Plate
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Dai Hyun steel coil slitting line, built in 1994. The line is specified for processing hot- and cold-rolled steel coil, hot-dip galvanized steel, and carbon steel. Its line direction is left to right, and the stated strip width is 1,400 mm. The listed strip thickness range is 0.8–6.0 mm. Maximum coil weight is 24 MT. The uncoiler is listed with liner sizes of Ø480 mm and Ø600 mm; coil diameters are Ø1,000 mm and Ø2,000 mm. The recoiler inside diameters are Ø500 mm and Ø760 mm.
The stated slitting speed is 50–100 m/min, with an edging width of 3–10 mm. The minimum slit width is listed as 40 mm for material thicknesses of 1.0–2.5 mm. The capacity table gives the following operating details: for 1.0–1.9 mm thickness, 16 cuts, 15 strips, and 70–90 m/min; for 2.0–2.9 mm, 14 cuts, 13 strips, and 70–80 m/min; for 3.0–4.0 mm, 12 cuts, 11 strips, and 60–70 m/min; for 4.1–5.0 mm, 7 cuts, 6 strips, and 60–70 m/min; and for 5.0–6.3 mm, 5 cuts, 4 strips, and 50–60 m/min. These capacity-table ranges are presented as specified.
Listed equipment and components include an infeed coil car, decoiler, opener and press-down roll, three rolls with pinch roll and hydraulic shear, roller table, pinch rolls and side guide, two slitters, two scrap winders, loop table, tension pad, leveler, tension roll, two separators, recoiler, outfeed coil car, and pusher plate.
Electrical details are listed as 400 V, 50 Hz input and 220 VAC, 50 Hz, three-phase drive power with ±10% tolerance. Control voltage is 110 VAC, 50 Hz, single phase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 33 |
| Last activity | Oct. 30, 2026 |
Линия за рязане / линия за рязане по дължина DAI HYUN 1400 mm
Řezací linka / linka s podélným řezem DAI HYUN 1400 mm
DAI HYUN 1400 mm Opskæring line / Skær til længde linje
DAI HYUN 1400 mm Spaltanlage
Γραμμή κοπής / Γραμμή κοπής σε μήκος DAI HYUN 1400 mm
DAI HYUN 1400 mm Slitting line / Cut to length line
Línea de corte transversal DAI HYUN 1400 mm
Ligne de refendage DAI HYUN 1400 mm
Linija za rezanje / Linija za rezanje na duljinu DAI HYUN 1400 mm
DAI HYUN 1400 mm Hasítási vonal / Vágás hosszúságú vonalra
Linea di taglio DAI HYUN 1400 mm
DAI HYUN 1400 mm Pjaustymo linija / Iškirpti iki ilgio linijos
DAI HYUN 1400 mm Snijlijn / Op lengte gesneden lijn
Linia wzdłużnego cięcia taśm DAI HYUN 1400 mm
Linha de corte / Linha de corte no comprimento DAI HYUN 1400 mm
Linie de tăiere / Linie de tăiere la lungime DAI HYUN 1400 mm
DAI HYUN 1400 mm Линия продольной резки
Linija sečenja / linija sečenja na dužinu DAI HYUN 1400 mm
DAI HYUN 1400 mm Klipplina / Klipp till längdlinjen
Dilme hattı DAI HYUN 1400 mm
EN
- Languages
English (GB)