| Manufacturer | DAEWOO |
|---|---|
| Model | MYNX 550 |
| Year | 2003 |
| Location | Italy
|
Listing: DAEWOO MYNX 550 — 3-axis vertical machining centre (manufactured 2003)
Overview:
This listing is for a DAEWOO MYNX 550 vertical machining centre, manufactured in 2003. The machine is configured as a 3-axis centre with the following machine travels and capacities provided in the listing: X-axis travel 1,200 mm, Y-axis travel 650 mm, Z-axis travel 620 mm. The spindle is specified with a maximum speed of 10,000 rpm. A tool magazine with a capacity of 24 positions is also listed.
Key specifications (as provided):
- Manufacturer: DAEWOO
- Model: MYNX 550
- Year manufactured: 2003
- Number of axes: 3
- X-axis travel: 1,200 mm
- Y-axis travel: 650 mm
- Z-axis travel: 620 mm
- Maximum spindle speed: 10,000 rpm
- Tool magazine capacity: 24 positions
Notes and recommended questions to ask before purchase:
- The listing does not include spindle motor power, control type/model, table dimensions, maximum part weight, machine footprint, or total operating hours. Request these items if important for your application.
- Ask for details on the tool changer type (e.g., carousel/arm) and any available tooling or holder interfaces (e.g., BT/ISO).
- Confirm the machine’s electrical requirements, recent maintenance or service records, and whether any spare parts or documentation are included.
- If required, request photos of the control panel, spindle taper, table surface, and tooling interface, or ask about an on-site inspection or demonstration.
This description is limited to details present in the provided listing. For additional technical specs or condition information, please request the specific items listed above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis DAEWOO MYNX 550 was manufactured in 2003. It features an X-axis travel of 1,200 mm, Y-axis travel of 650 mm, and Z-axis travel of 620 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 550 vertical machining centre we have for sale. Contact us for further details.Tool magazine capacity: 24 positions
Number of Axes: 3
Spindle Speed: 10000 RPM
X-axis Travel: 1200 mm
Y-axis Travel: 650 mm
Z-axis Travel: 620 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 1, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis DAEWOO MYNX 550 was manufactured in 2003. It features an X-axis travel of 1,200 mm, Y-axis travel of 650 mm, and Z-axis travel of 620 mm. The machine is equipped with a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24 positions. If you are looking to get high-quality machining capabilities, consider the DAEWOO MYNX 550 vertical machining centre we have for sale. Contact us for further details.Tool magazine capacity: 24 positions
Number of Axes: 3
Spindle Speed: 10000 RPM
X-axis Travel: 1200 mm
Y-axis Travel: 650 mm
Z-axis Travel: 620 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Listing: DAEWOO MYNX 550 — 3-axis vertical machining centre (manufactured 2003)
Overview:
This listing is for a DAEWOO MYNX 550 vertical machining centre, manufactured in 2003. The machine is configured as a 3-axis centre with the following machine travels and capacities provided in the listing: X-axis travel 1,200 mm, Y-axis travel 650 mm, Z-axis travel 620 mm. The spindle is specified with a maximum speed of 10,000 rpm. A tool magazine with a capacity of 24 positions is also listed.
Key specifications (as provided):
- Manufacturer: DAEWOO
- Model: MYNX 550
- Year manufactured: 2003
- Number of axes: 3
- X-axis travel: 1,200 mm
- Y-axis travel: 650 mm
- Z-axis travel: 620 mm
- Maximum spindle speed: 10,000 rpm
- Tool magazine capacity: 24 positions
Notes and recommended questions to ask before purchase:
- The listing does not include spindle motor power, control type/model, table dimensions, maximum part weight, machine footprint, or total operating hours. Request these items if important for your application.
- Ask for details on the tool changer type (e.g., carousel/arm) and any available tooling or holder interfaces (e.g., BT/ISO).
- Confirm the machine’s electrical requirements, recent maintenance or service records, and whether any spare parts or documentation are included.
- If required, request photos of the control panel, spindle taper, table surface, and tooling interface, or ask about an on-site inspection or demonstration.
This description is limited to details present in the provided listing. For additional technical specs or condition information, please request the specific items listed above.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 1, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Вертикален обработващ център DAEWOO MYNX 550
Vertikální obráběcí centrum DAEWOO MYNX 550
DAEWOO MYNX 550 Lodret bearbejdningscenter
DAEWOO MYNX 550 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας DAEWOO MYNX 550
DAEWOO MYNX 550 Vertical machining center
Centro de mecanizado vertical DAEWOO MYNX 550
Centre d'usinage vertical DAEWOO MYNX 550
Vertikalni obradni centar DAEWOO MYNX 550
DAEWOO MYNX 550 Függőleges megmunkáló központ
Centro di lavoro verticale DAEWOO MYNX 550
DAEWOO MYNX 550 Vertikalus apdirbimo centras
DAEWOO MYNX 550 Verticaal bewerkingscentrum
Pionowe centrum obróbcze DAEWOO MYNX 550
Centro de usinagem vertical DAEWOO MYNX 550
Centru de prelucrare vertical DAEWOO MYNX 550
DAEWOO MYNX 550 Вертикальный обрабатывающий центр
Vertikalni obradni centar DAEWOO MYNX 550
DAEWOO MYNX 550 Vertikalt bearbetningscenter
Dikey işleme merkezi DAEWOO MYNX 550
EN
- Languages
English (GB)