| Manufacturer | D-F |
|---|---|
| Model | CW61220 |
| Year | |
| Location | USA
|
| Category | Lathes - Heavy-duty lathes (above 3001 mm) |
| Length between centers | 0 mm |
| Ø above the bed | 2200 mm |
| Ø above transversing slide | 1800 mm |
| Spindle bore | 130 mm |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 14/11/2025 |
| Product id | P2403121080 |
| Language |
тежкотоварен струг D-F CW61220
Velký soustruh D-F CW61220
D-F CW61220 kraftig drejebænk
D-F CW61220 Schwerdrehbank
τόρνος βαρέως τύπου D-F CW61220
D-F CW61220 heavy duty lathe
Torno de gran capacidad D-F CW61220
Tour grande capacité D-F CW61220
teški tokarski stroj D-F CW61220
D-F CW61220 nagy teherbírású eszterga
Tornio pesante D-F CW61220
sunkios tekinimo staklės D-F CW61220
D-F CW61220 zware draaibank
Tokarka ciężka D-F CW61220
torno resistente D-F CW61220
strung greu D-F CW61220
D-F CW61220 Тяжёлый токарный станок
strug za teške uslove rada D-F CW61220
D-F CW61220 kraftig svarv
Ağır Tip Torna D-F CW61220
|
The D-F CW61220 is a medium-duty heavy lathe designed for industrial machining tasks requiring substantial capacity and precision. It features a swing over the bed of 2200 mm and a swing over the cross slide of 1800 mm, accommodating large workpieces up to 10,000 kg in weight. The lathe has a maximum distance between centers of 5000 mm, making it suitable for machining long components.
This model is equipped with a spindle bore diameter of 130 mm (with a 100 mm option available), supporting a spindle speed range from 2.5 to 250 rpm through a manual 21-step speed selection. The spindle is driven by a 30 kW AC motor, ensuring robust power for various machining operations. The machine includes a two-guide way system and an A2-15 spindle nose.
Feed rates for the lathe are as follows: longitudinal feed at 0.06412 mm/rev, cross feed at 0.0326 mm/rev, and top slide feed adjustable between 0.016 and 3 mm/rev. Rapid traverse speeds reach up to 3740 mm/min on the longitudinal axis and 1870 mm/min on the cross axis, allowing for efficient material removal and setup.
The tailstock features a quill diameter of 280 mm with a taper of 80/1:7 and a quill travel of 300 mm, providing support for long workpieces during machining.
Standard equipment includes a 1600 mm diameter faceplate, a 4-way tool post with a 45x45 mm tool shank section, a coolant system, lubrication system, working lamp, and a left hand-wheel. The lathe operates on a 380V/50Hz/3-phase power supply.
Additional features include rapid travel in both longitudinal and cross axes, a lubrication oil gun, foundation bolts, and a tool kit. Optional accessories available are a second carriage and tool post, as well as a 2-axis DRO installed.
The machine's overall dimensions are 9920 mm in length, 2480 mm in width, and 2610 mm in height, with a total weight of approximately 30,400 kg.
Visually, the lathe is a large, heavy-duty machine with a long bed and a blue base. The headstock includes a control panel and a handwheel on the right side, while the tailstock and carriage assembly are positioned on the left. A monitor or control display is mounted near the headstock area. The machine appears to be in good condition with no visible major damage or rust.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
D-F 2.2m x 5m Model CW61220 Medium Duty (10 Tons) 2-Way Design Lathe. Available also in (18 Ton) 2- Way Design, and (32 Ton) 3-Way Design.
Dimensions 2480 x 9920 x 2610
Weight 30400
D-F 2.2m x 5m Model CW61220 Medium Duty (10 Tons) 2-Way Design Lathe. ALSO: Available (18 Ton) 2-Way Design.
Standard configuration
Metric
380V/50Hz/3phase
A2-15 spindle nose
100(130-option) mm spindle bore
Two guide way
Left hand-wheel
Coolant system
AC 30 kw spindle motor
Lubrication system
4 ways tool post
Rapid travel in longitudinal and cross axes
Working lamp
Technical specification
Swing over bed2200mm
Swing over cross slide1800mm
Width of guide way1100mm
Distance between center5000mm
Cross slide travel920mm
Travel of transverse tool post200mm
Travel of longitudinal tool post 400mm
Max. work-piece load10000 Kg
Section of tool shank 45x45mm
Tool post swing angle--90
Spindle
Spindle bore diameter100/130mm
Spindle speed 2.5--250 r.p.m
Step of spindle speed Manual 21 step
Feed
Longitudinal feed0.06412 mm/rev
Cross feed0.0326 mm/rev
Top slide feed0.016--3 mm/rev
Rapid traverse speedlongitudinal axis 3740 mm/min---cross axis 1870mm/min
Thread
Range of lmperial Pitches1/4-30 T.P.I.
Range of Diametral Pitches0.5-60 DP
Range of Metric Pitches1-120mm
Range of Module Pitches0.5-60MOD
Tailstock
Tailstock quill diameter280mm
Tailstock quill taper80/1:7
Tailstock quill travel300mm
Machine size
Machine overall (length x Width x height) 9920 x 2480 x 2610mm
Machine weight 30400Kg
Standard accessories
Face plate dia.1600mm
Tool kits
Lubrication oil gun
Foundation bolts
Optional accessories
Second carriage and tool post
2-axes DRO installed:
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 34 |
| Last activity | Oct. 26, 2026 |
D-F 2.2m x 5m Model CW61220 Medium Duty (10 Tons) 2-Way Design Lathe. Available also in (18 Ton) 2- Way Design, and (32 Ton) 3-Way Design.
Dimensions 2480 x 9920 x 2610
Weight 30400
D-F 2.2m x 5m Model CW61220 Medium Duty (10 Tons) 2-Way Design Lathe. ALSO: Available (18 Ton) 2-Way Design.
Standard configuration
Metric
380V/50Hz/3phase
A2-15 spindle nose
100(130-option) mm spindle bore
Two guide way
Left hand-wheel
Coolant system
AC 30 kw spindle motor
Lubrication system
4 ways tool post
Rapid travel in longitudinal and cross axes
Working lamp
Technical specification
Swing over bed2200mm
Swing over cross slide1800mm
Width of guide way1100mm
Distance between center5000mm
Cross slide travel920mm
Travel of transverse tool post200mm
Travel of longitudinal tool post 400mm
Max. work-piece load10000 Kg
Section of tool shank 45x45mm
Tool post swing angle--90
Spindle
Spindle bore diameter100/130mm
Spindle speed 2.5--250 r.p.m
Step of spindle speed Manual 21 step
Feed
Longitudinal feed0.06412 mm/rev
Cross feed0.0326 mm/rev
Top slide feed0.016--3 mm/rev
Rapid traverse speedlongitudinal axis 3740 mm/min---cross axis 1870mm/min
Thread
Range of lmperial Pitches1/4-30 T.P.I.
Range of Diametral Pitches0.5-60 DP
Range of Metric Pitches1-120mm
Range of Module Pitches0.5-60MOD
Tailstock
Tailstock quill diameter280mm
Tailstock quill taper80/1:7
Tailstock quill travel300mm
Machine size
Machine overall (length x Width x height) 9920 x 2480 x 2610mm
Machine weight 30400Kg
Standard accessories
Face plate dia.1600mm
Tool kits
Lubrication oil gun
Foundation bolts
Optional accessories
Second carriage and tool post
2-axes DRO installed:
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Lathes - Heavy-duty lathes (above 3001 mm) |
| Length between centers | 0 mm |
| Ø above the bed | 2200 mm |
| Ø above transversing slide | 1800 mm |
| Spindle bore | 130 mm |
| Overhauled | no |
| Tailstock | no |
| Steady | no |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | --------- |
| status | |
| Last availability date | 14/11/2025 |
| Product id | P2403121080 |
| Language |
тежкотоварен струг D-F CW61220
Velký soustruh D-F CW61220
D-F CW61220 kraftig drejebænk
D-F CW61220 Schwerdrehbank
τόρνος βαρέως τύπου D-F CW61220
D-F CW61220 heavy duty lathe
Torno de gran capacidad D-F CW61220
Tour grande capacité D-F CW61220
teški tokarski stroj D-F CW61220
D-F CW61220 nagy teherbírású eszterga
Tornio pesante D-F CW61220
sunkios tekinimo staklės D-F CW61220
D-F CW61220 zware draaibank
Tokarka ciężka D-F CW61220
torno resistente D-F CW61220
strung greu D-F CW61220
D-F CW61220 Тяжёлый токарный станок
strug za teške uslove rada D-F CW61220
D-F CW61220 kraftig svarv
Ağır Tip Torna D-F CW61220
|
The D-F CW61220 is a medium-duty heavy lathe designed for industrial machining tasks requiring substantial capacity and precision. It features a swing over the bed of 2200 mm and a swing over the cross slide of 1800 mm, accommodating large workpieces up to 10,000 kg in weight. The lathe has a maximum distance between centers of 5000 mm, making it suitable for machining long components.
This model is equipped with a spindle bore diameter of 130 mm (with a 100 mm option available), supporting a spindle speed range from 2.5 to 250 rpm through a manual 21-step speed selection. The spindle is driven by a 30 kW AC motor, ensuring robust power for various machining operations. The machine includes a two-guide way system and an A2-15 spindle nose.
Feed rates for the lathe are as follows: longitudinal feed at 0.06412 mm/rev, cross feed at 0.0326 mm/rev, and top slide feed adjustable between 0.016 and 3 mm/rev. Rapid traverse speeds reach up to 3740 mm/min on the longitudinal axis and 1870 mm/min on the cross axis, allowing for efficient material removal and setup.
The tailstock features a quill diameter of 280 mm with a taper of 80/1:7 and a quill travel of 300 mm, providing support for long workpieces during machining.
Standard equipment includes a 1600 mm diameter faceplate, a 4-way tool post with a 45x45 mm tool shank section, a coolant system, lubrication system, working lamp, and a left hand-wheel. The lathe operates on a 380V/50Hz/3-phase power supply.
Additional features include rapid travel in both longitudinal and cross axes, a lubrication oil gun, foundation bolts, and a tool kit. Optional accessories available are a second carriage and tool post, as well as a 2-axis DRO installed.
The machine's overall dimensions are 9920 mm in length, 2480 mm in width, and 2610 mm in height, with a total weight of approximately 30,400 kg.
Visually, the lathe is a large, heavy-duty machine with a long bed and a blue base. The headstock includes a control panel and a handwheel on the right side, while the tailstock and carriage assembly are positioned on the left. A monitor or control display is mounted near the headstock area. The machine appears to be in good condition with no visible major damage or rust.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 34 |
| Last activity | Oct. 26, 2026 |
EN
- Languages
English (GB)