| Manufacturer | CU |
|---|---|
| Model | Hopper 350 cu ft with auger |
| Year | 2024 |
| Location | USA
|
Item overview:
This listing is for a Nordstrong open-top hopper with auger and structural stand. The hopper is carbon steel, with an advertised capacity of approximately 350 cubic feet and external dimensions of 126" W x 77" L x 144" H. The unit is described as new and unused but has been exposed to weather and would require blasting and painting prior to use.
Key features and components:
- Hopper: Open-top design on a carbon-steel legged stand. The hopper has a 60-degree taper at the bottom feeding an internal screw (auger).
- Internal screw drive: Internal screw is driven by a 1 HP vertical gearmotor (for the hopper discharge).
- Discharge arrangement: Hopper discharge drops into an external drag conveyor reported to be approximately 12 ft long; that conveyor is driven by a 1 HP vertical gearmotor.
- Screw conveyor (auger): Specified as 5.25" diameter x 17 ft long. Drive is a 3 HP motor, 230/460V, 3/60, 1760 rpm.
- Gear reducer: Dodge speed reducer with ratio 14.91:1 (final rpm listed as 62).
- Stand and weighing: Structural steel hopper stand equipped with four Rice Lake load cells.
- Design/performance note: Design capacity listed as 18 cu ft/min at a product density of 42 lb/cu ft; the screw conveyor is designed for a 30-degree incline.
Included with the sale:
- Hopper, auger (screw conveyor), and structural stand (all three pieces) as described.
Condition and surface note:
- Described as NEW and unused but exposed to weather; surface preparation (blasting) and painting will be required before placing the unit into service.
Manufacturer: Nordstrong
No additional testing, operational status, serial numbers, location, or seller information is provided in the description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Item: Hopper 350 cu ft with auger
Type: Open top hopper on legs
Material: Carbon steel
Dimensions: 126" W x 77" L x 144" H
Capacity: approximately 350 cu ft
Hopper features: 60-degree taper at bottom to an internal screw driven by a 1 HP vertical gearmotor
Discharge path: Drops into an external drag conveyor approximately 12 ft long driven by a 1 HP vertical gear motor
Manhead: End opening square manhead
Year of manufacture: 2024
Condition: NEW, unused; has been exposed to weather and would require blasting and painting
Stand: Structural steel hopper stand with four Rice Lake load cells
Stand material: Carbon steel
Screw conveyor: 5.25" diameter x 17 ft long
Drive: 3 HP motor, 230/460V, 3/60, 1760 rpm
Reducer: Dodge speed reducer 14.91:1 (final rpm 62)
Manufacturer: Nordstrong
Design capacity: 18 cu ft/min at product density 42 lb/cu ft
Inclination: Designed for 30-degree incline
Included: Includes hopper, auger, and stand (all three pieces)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 57 |
| Last activity | Oct. 27, 2026 |
Solutions 4 Mfg (S4M) is a trusted industrial equipment partner helping manufacturers buy, sell, and maximize the value of machinery worldwide. With more than 50 years of combined industry expertise, the company specializes in serving the Biofuels, Renewable Energy, Edible Oils, and Process Industries.
Through its extensive global network and equipment database, S4M provides fast access to quality new and used machinery, helping clients reduce capital investment, shorten project timelines, and recover value from idle assets. From individual machines to complete production systems, the company delivers practical, cost effective solutions tailored to industrial needs.
Focused on speed, reliability, and return on investment, Solutions 4 Mfg helps manufacturers optimize resources, improve productivity, and make smarter equipment decisions.
Item: Hopper 350 cu ft with auger
Type: Open top hopper on legs
Material: Carbon steel
Dimensions: 126" W x 77" L x 144" H
Capacity: approximately 350 cu ft
Hopper features: 60-degree taper at bottom to an internal screw driven by a 1 HP vertical gearmotor
Discharge path: Drops into an external drag conveyor approximately 12 ft long driven by a 1 HP vertical gear motor
Manhead: End opening square manhead
Year of manufacture: 2024
Condition: NEW, unused; has been exposed to weather and would require blasting and painting
Stand: Structural steel hopper stand with four Rice Lake load cells
Stand material: Carbon steel
Screw conveyor: 5.25" diameter x 17 ft long
Drive: 3 HP motor, 230/460V, 3/60, 1760 rpm
Reducer: Dodge speed reducer 14.91:1 (final rpm 62)
Manufacturer: Nordstrong
Design capacity: 18 cu ft/min at product density 42 lb/cu ft
Inclination: Designed for 30-degree incline
Included: Includes hopper, auger, and stand (all three pieces)
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Item overview:
This listing is for a Nordstrong open-top hopper with auger and structural stand. The hopper is carbon steel, with an advertised capacity of approximately 350 cubic feet and external dimensions of 126" W x 77" L x 144" H. The unit is described as new and unused but has been exposed to weather and would require blasting and painting prior to use.
Key features and components:
- Hopper: Open-top design on a carbon-steel legged stand. The hopper has a 60-degree taper at the bottom feeding an internal screw (auger).
- Internal screw drive: Internal screw is driven by a 1 HP vertical gearmotor (for the hopper discharge).
- Discharge arrangement: Hopper discharge drops into an external drag conveyor reported to be approximately 12 ft long; that conveyor is driven by a 1 HP vertical gearmotor.
- Screw conveyor (auger): Specified as 5.25" diameter x 17 ft long. Drive is a 3 HP motor, 230/460V, 3/60, 1760 rpm.
- Gear reducer: Dodge speed reducer with ratio 14.91:1 (final rpm listed as 62).
- Stand and weighing: Structural steel hopper stand equipped with four Rice Lake load cells.
- Design/performance note: Design capacity listed as 18 cu ft/min at a product density of 42 lb/cu ft; the screw conveyor is designed for a 30-degree incline.
Included with the sale:
- Hopper, auger (screw conveyor), and structural stand (all three pieces) as described.
Condition and surface note:
- Described as NEW and unused but exposed to weather; surface preparation (blasting) and painting will be required before placing the unit into service.
Manufacturer: Nordstrong
No additional testing, operational status, serial numbers, location, or seller information is provided in the description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 57 |
| Last activity | Oct. 27, 2026 |
Solutions 4 Mfg (S4M) is a trusted industrial equipment partner helping manufacturers buy, sell, and maximize the value of machinery worldwide. With more than 50 years of combined industry expertise, the company specializes in serving the Biofuels, Renewable Energy, Edible Oils, and Process Industries.
Through its extensive global network and equipment database, S4M provides fast access to quality new and used machinery, helping clients reduce capital investment, shorten project timelines, and recover value from idle assets. From individual machines to complete production systems, the company delivers practical, cost effective solutions tailored to industrial needs.
Focused on speed, reliability, and return on investment, Solutions 4 Mfg helps manufacturers optimize resources, improve productivity, and make smarter equipment decisions.
Опаковъчна машина CU Hopper 350 cu ft with auger
Balicí stroj CU Hopper 350 cu ft with auger
CU Hopper 350 cu ft with auger Pakkemaskine
CU Hopper 350 cu ft with auger Verpackungsmaschine
Μηχανή συσκευασίας CU Hopper 350 cu ft with auger
CU Hopper 350 cu ft with auger Packaging machine
Máquina de embalaje CU Hopper 350 cu ft with auger
Machine d'emballage CU Hopper 350 cu ft with auger
Stroj za pakiranje CU Hopper 350 cu ft with auger
CU Hopper 350 cu ft with auger Csomagológép
Macchina confezionatrice CU Hopper 350 cu ft with auger
CU Hopper 350 cu ft with auger Pakavimo mašina
CU Hopper 350 cu ft with auger Verpakkingsmachine
Maszyna pakująca CU Hopper 350 cu ft with auger
Máquina de embalagem CU Hopper 350 cu ft with auger
Mașină de ambalat CU Hopper 350 cu ft with auger
CU Hopper 350 cu ft with auger Упаковочная машина
Mašina za pakovanje CU Hopper 350 cu ft with auger
CU Hopper 350 cu ft with auger Förpackningsmaskin
Paketleme makinesi CU Hopper 350 cu ft with auger
EN
- Languages
English (GB)