Contact us to receive an offer.
| Manufacturer | Colombo |
|---|---|
| Model | 180 t |
| Year | |
| Location | Italy
|
| Category | Forging - Mechanical presses |
| Power in tons | 180 T |
| Type | C-Frame |
| Ram stroke | 150 mm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 06/11/2026 |
| Product id | P261104187 |
| Language |
Механична преса Colombo 180 t
Mechanický lis Colombo 180 t
Colombo 180 t Mekanisk presse
Colombo 180 t Mechanische Presse
Μηχανική πρέσα Colombo 180 t
Colombo 180 t Mechanical press
Prensa mecánica Colombo 180 t
Presse mécanique Colombo 180 t
Mehanička preša Colombo 180 t
Colombo 180 t Mechanikus prés
Pressa meccanica Colombo 180 t
Colombo 180 t Mechaninis presas
Colombo 180 t Mechanische pers
Prasa mechaniczna Colombo 180 t
Prensa mecânica Colombo 180 t
Presă mecanică Colombo 180 t
Colombo 180 t Механический пресс
Mehanička presa Colombo 180 t
Colombo 180 t Mekanisk press
Mekanik pres Colombo 180 t
|
Colombo gooseneck mechanical press with a monoblock C-frame and flywheel drive. The machine is used and offered in its current, as-is condition. Its nominal force is 180 t (approximately 1,770 kN), and the ram stroke is 150 mm.
The gooseneck frame provides access to the working area from three sides. The press is described as suitable for sheet-metal operations including blanking, punching, bending and cold stamping, including work involving manual or coil-fed material. In a flywheel press, energy stored in the flywheel is delivered to the ram during the working stroke; this operating principle allows the press to deliver its nominal force using a relatively low-power motor.
Equipment and controls include a stroke counter mounted on the control pedestal and key-operated selectors for control functions. An air reservoir is mounted at the top of the machine. Mesh perimeter guards are fitted around the working area.
Technical details:
- Machine type: Gooseneck mechanical press, monoblock C-frame
- Manufacturer: Colombo
- Model designation: 180 t
- Drive: Flywheel
- Nominal force: 180 t (approximately 1,770 kN)
- Ram stroke: 150 mm
- Working-area access: Three sides
- Stated applications: Blanking, punching, bending and cold stamping of sheet metal
- Equipment: Stroke counter, key-operated selectors and top-mounted air reservoir
- Guarding: Mesh perimeter guards around the working area
The technical information is indicative and non-contractual, based on the available technical documentation. Subject to prior sale.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Machine type: Gooseneck mechanical press, monoblock C-frame
Manufacturer: Colombo
Model: 180 t
Condition: Used, offered as-is
Nominal force: 180 t (approximately 1,770 kN)
Ram stroke: 150 mm
Drive: Flywheel
Applications: Blanking, punching, bending and cold stamping of sheet metal
Working area: Accessible from three sides
Equipment: Stroke counter on control pedestal
Controls: Key-operated selectors
Additional equipment: Air reservoir mounted on top of the machine
Safety: Mesh perimeter guards around the working area
Technical information: Indicative and non-contractual; based on available technical documentation. Subject to prior sale.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 26 |
| Last activity | Nov. 5, 2026 |
Machine type: Gooseneck mechanical press, monoblock C-frame
Manufacturer: Colombo
Model: 180 t
Condition: Used, offered as-is
Nominal force: 180 t (approximately 1,770 kN)
Ram stroke: 150 mm
Drive: Flywheel
Applications: Blanking, punching, bending and cold stamping of sheet metal
Working area: Accessible from three sides
Equipment: Stroke counter on control pedestal
Controls: Key-operated selectors
Additional equipment: Air reservoir mounted on top of the machine
Safety: Mesh perimeter guards around the working area
Technical information: Indicative and non-contractual; based on available technical documentation. Subject to prior sale.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Forging - Mechanical presses |
| Power in tons | 180 T |
| Type | C-Frame |
| Ram stroke | 150 mm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 06/11/2026 |
| Product id | P261104187 |
| Language |
Механична преса Colombo 180 t
Mechanický lis Colombo 180 t
Colombo 180 t Mekanisk presse
Colombo 180 t Mechanische Presse
Μηχανική πρέσα Colombo 180 t
Colombo 180 t Mechanical press
Prensa mecánica Colombo 180 t
Presse mécanique Colombo 180 t
Mehanička preša Colombo 180 t
Colombo 180 t Mechanikus prés
Pressa meccanica Colombo 180 t
Colombo 180 t Mechaninis presas
Colombo 180 t Mechanische pers
Prasa mechaniczna Colombo 180 t
Prensa mecânica Colombo 180 t
Presă mecanică Colombo 180 t
Colombo 180 t Механический пресс
Mehanička presa Colombo 180 t
Colombo 180 t Mekanisk press
Mekanik pres Colombo 180 t
|
Colombo gooseneck mechanical press with a monoblock C-frame and flywheel drive. The machine is used and offered in its current, as-is condition. Its nominal force is 180 t (approximately 1,770 kN), and the ram stroke is 150 mm.
The gooseneck frame provides access to the working area from three sides. The press is described as suitable for sheet-metal operations including blanking, punching, bending and cold stamping, including work involving manual or coil-fed material. In a flywheel press, energy stored in the flywheel is delivered to the ram during the working stroke; this operating principle allows the press to deliver its nominal force using a relatively low-power motor.
Equipment and controls include a stroke counter mounted on the control pedestal and key-operated selectors for control functions. An air reservoir is mounted at the top of the machine. Mesh perimeter guards are fitted around the working area.
Technical details:
- Machine type: Gooseneck mechanical press, monoblock C-frame
- Manufacturer: Colombo
- Model designation: 180 t
- Drive: Flywheel
- Nominal force: 180 t (approximately 1,770 kN)
- Ram stroke: 150 mm
- Working-area access: Three sides
- Stated applications: Blanking, punching, bending and cold stamping of sheet metal
- Equipment: Stroke counter, key-operated selectors and top-mounted air reservoir
- Guarding: Mesh perimeter guards around the working area
The technical information is indicative and non-contractual, based on the available technical documentation. Subject to prior sale.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2025 |
| Offers online | 26 |
| Last activity | Nov. 5, 2026 |
EN
- Languages
English (GB)