Contact us to receive an offer.
| Manufacturer | CME |
|---|---|
| Model | FS-0 |
| Year | |
| Location | Spain
|
This listing features a CME FS-0 CNC bed-type milling machine designed for versatile machining tasks. The machine offers substantial axes travel with X, Y, and Z travels of 1200 mm, 750 mm, and 750 mm respectively, allowing for the machining of large workpieces. The worktable measures 1300 mm in length and 700 mm in width, equipped with T-slots for secure mounting of workpieces. It supports a maximum load of 2000 kg on the table, suitable for heavy-duty operations.
The spindle is a semi-automatic horizontal/vertical type with a maximum speed of 4000 rpm, powered by a 22 kW motor. It features an ISO-40 spindle taper and comes with a protective cover and visible cabling, indicating attention to component protection. Rapid feed rates reach up to 30 m/min, with working feeds up to 20 mm/min, supporting efficient machining cycles.
Control is managed through a Heidenhain TNC i530 system, with an electronic handwheel also by Heidenhain for precise manual adjustments. The control panel is mounted on the right side of the machine and includes a screen, keyboard, various buttons, knobs, and emergency stop buttons. A handheld pendant is attached to the control panel for additional operational convenience. The control panel shows minor wear but remains in good condition.
The machine includes a chip extractor and a hydraulic or pneumatic system at the rear with hoses and a pressure gauge. An external cooling or hydraulic unit with a control panel and fan is located near the machine base, showing signs of use but appearing functional. The electrical cabinet is accessible and organized, with circuit breakers, relays, and wiring intact.
Overall, the machine's exterior shows minor signs of use without visible damage. The spindle and axes appear clean and well-maintained. Note that the floor area around the machine has some oil or fluid stains. This CME FS-0 milling machine is a robust and well-equipped solution for precision and heavy-duty CNC milling applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Make and Model: CME FS-0
Axes travel: 1200x750x750 mm
Table: 1300x700 mm
Spindle: Semi-automatic Horizontal/Vertical
Weight on bed: 2Tn
Rapid feeds: 30 m/min
Working feeds: 20 mm/min
Spindle speed: 4.000 rpm
Spindle Power: 22 Kw
Spindle type: ISO-40
Control: Heidenhain TNC i530
Electronic handwheel: Heidenhain
Chip extractor: Included
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 5 |
| Last activity | Nov. 2, 2026 |
Make and Model: CME FS-0
Axes travel: 1200x750x750 mm
Table: 1300x700 mm
Spindle: Semi-automatic Horizontal/Vertical
Weight on bed: 2Tn
Rapid feeds: 30 m/min
Working feeds: 20 mm/min
Spindle speed: 4.000 rpm
Spindle Power: 22 Kw
Spindle type: ISO-40
Control: Heidenhain TNC i530
Electronic handwheel: Heidenhain
Chip extractor: Included
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing features a CME FS-0 CNC bed-type milling machine designed for versatile machining tasks. The machine offers substantial axes travel with X, Y, and Z travels of 1200 mm, 750 mm, and 750 mm respectively, allowing for the machining of large workpieces. The worktable measures 1300 mm in length and 700 mm in width, equipped with T-slots for secure mounting of workpieces. It supports a maximum load of 2000 kg on the table, suitable for heavy-duty operations.
The spindle is a semi-automatic horizontal/vertical type with a maximum speed of 4000 rpm, powered by a 22 kW motor. It features an ISO-40 spindle taper and comes with a protective cover and visible cabling, indicating attention to component protection. Rapid feed rates reach up to 30 m/min, with working feeds up to 20 mm/min, supporting efficient machining cycles.
Control is managed through a Heidenhain TNC i530 system, with an electronic handwheel also by Heidenhain for precise manual adjustments. The control panel is mounted on the right side of the machine and includes a screen, keyboard, various buttons, knobs, and emergency stop buttons. A handheld pendant is attached to the control panel for additional operational convenience. The control panel shows minor wear but remains in good condition.
The machine includes a chip extractor and a hydraulic or pneumatic system at the rear with hoses and a pressure gauge. An external cooling or hydraulic unit with a control panel and fan is located near the machine base, showing signs of use but appearing functional. The electrical cabinet is accessible and organized, with circuit breakers, relays, and wiring intact.
Overall, the machine's exterior shows minor signs of use without visible damage. The spindle and axes appear clean and well-maintained. Note that the floor area around the machine has some oil or fluid stains. This CME FS-0 milling machine is a robust and well-equipped solution for precision and heavy-duty CNC milling applications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2016 |
| Offers online | 5 |
| Last activity | Nov. 2, 2026 |
cnc фреза тип легло CME FS-0
Frézka cnc stolní CME FS-0
CME FS-0 cnc bed type fræsemaskine
CME FS-0 CNC Fräsmaschine
φρέζα τύπου κρεβατιού cnc CME FS-0
CME FS-0 cnc bed type milling machine
Fresadora cnc de bancada fija CME FS-0
Fraiseuse cnc à banc fixe CME FS-0
CNC glodalica s krevetom CME FS-0
CME FS-0 cnc ágy típusú marógép
Fresatrice cnc a banco fisso CME FS-0
cnc lovos tipo frezavimo stakles CME FS-0
CME FS-0 cnc-bedfreesmachine
Frezarka CNC łożowa CME FS-0
fresadora tipo cama cnc CME FS-0
mașină de frezat tip pat cnc CME FS-0
CME FS-0 Станок с фрезерной станиной с ЧПУ
cnc mašina za glodanje tipa kreveta CME FS-0
CME FS-0 fräsmaskin av cnc-bäddtyp
Cnc dikey freze makinesi CME FS-0
EN
- Languages
English (GB)