Contact us to receive an offer.
| Manufacturer | cielle |
|---|---|
| Model | Beta 65x45 |
| Year | 2001 |
| Location | Italy
|
Professional machining center equipped with an automatic tool changer and a worktable with vacuum clamping. The vacuum-sealed work surface is described as holding the workpiece in place without the need for clamps. The machine is also described as coming with about ten drill bits; the quantity is approximate. These features are suited to the mold-modification work for which the machine was used. According to the available description, it was needed only occasionally for modifying molds and was barely used.
The listing describes the machine as a professional machining center, but does not provide a make, model, control type, or other technical specifications. No details are given about the table dimensions, spindle, travel, power, year, or operating hours, so these should not be assumed. The description also does not state whether the machine has been tested or provide information about its current operating condition. Buyers should note that the stated low-use history refers to occasional mold modification, and no further usage or maintenance records are provided. The included tooling is identified only as about ten drill bits; their sizes, types, and condition are not specified. This description is limited to the supplied information: an automatic tool changer, a vacuum-clamping worktable, approximately ten drill bits, and a history of occasional use for mold modifications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Professional machining center, with automatic tool changer and a worktable with vacuum clamping;
barely used, as it was only needed to modify molds occasionally.
The machining center has two important features: the vacuum-sealed work surface that holds the workpiece in place without clamps, and about ten drill bits, with automatic tool changer
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Oct. 15, 2026 |
Professional machining center, with automatic tool changer and a worktable with vacuum clamping;
barely used, as it was only needed to modify molds occasionally.
The machining center has two important features: the vacuum-sealed work surface that holds the workpiece in place without clamps, and about ten drill bits, with automatic tool changer
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Professional machining center equipped with an automatic tool changer and a worktable with vacuum clamping. The vacuum-sealed work surface is described as holding the workpiece in place without the need for clamps. The machine is also described as coming with about ten drill bits; the quantity is approximate. These features are suited to the mold-modification work for which the machine was used. According to the available description, it was needed only occasionally for modifying molds and was barely used.
The listing describes the machine as a professional machining center, but does not provide a make, model, control type, or other technical specifications. No details are given about the table dimensions, spindle, travel, power, year, or operating hours, so these should not be assumed. The description also does not state whether the machine has been tested or provide information about its current operating condition. Buyers should note that the stated low-use history refers to occasional mold modification, and no further usage or maintenance records are provided. The included tooling is identified only as about ten drill bits; their sizes, types, and condition are not specified. This description is limited to the supplied information: an automatic tool changer, a vacuum-clamping worktable, approximately ten drill bits, and a history of occasional use for mold modifications.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Oct. 15, 2026 |
Вертикален обработващ център cielle Beta 65x45
Vertikální obráběcí centrum cielle Beta 65x45
cielle Beta 65x45 Lodret bearbejdningscenter
cielle Beta 65x45 Vertikales Bearbeitungszentrum
Κάθετο κέντρο κατεργασίας cielle Beta 65x45
cielle Beta 65x45 Vertical machining center
Centro de mecanizado vertical cielle Beta 65x45
Centre d'usinage vertical cielle Beta 65x45
Vertikalni obradni centar cielle Beta 65x45
cielle Beta 65x45 Függőleges megmunkáló központ
Centro di lavoro verticale cielle Beta 65x45
cielle Beta 65x45 Vertikalus apdirbimo centras
cielle Beta 65x45 Verticaal bewerkingscentrum
Pionowe centrum obróbcze cielle Beta 65x45
Centro de usinagem vertical cielle Beta 65x45
Centru de prelucrare vertical cielle Beta 65x45
cielle Beta 65x45 Вертикальный обрабатывающий центр
Vertikalni obradni centar cielle Beta 65x45
cielle Beta 65x45 Vertikalt bearbetningscenter
Dikey işleme merkezi cielle Beta 65x45
EN
- Languages
English (GB)