Contact us to receive an offer.
| Manufacturer | CHIRON |
|---|---|
| Model | FZ 15 S profile system |
| Year | 2020 |
| Location | Belgium
|
This listing offers a high-quality CHIRON 5-axis vertical machining center, specifically designed for profile machining. The machine was built and first put into service in 2020. It features a SIEMENS 840D CNC control system, providing reliable and precise operation.
The machining center has a working range of 730 mm along the X-axis, 400 mm along the Y-axis, and 425 mm along the Z-axis. It is equipped with a spindle capable of reaching speeds up to 15,000 rpm and delivering a maximum torque of 140 Nm. The machine supports drilling up to a diameter of 42 mm and thread tapping up to M30.
Tool handling is facilitated by a 20-tool magazine with a tool taper of DIN 69893 HSK A63, accommodating tools up to 65 mm in diameter. The milling capacity is rated at 500 cm³/min in E355 steel, making it suitable for a range of demanding machining tasks.
Additional features include a chip conveyor of the scraper type, a profile bar feeder designed for bar lengths up to 6 meters and profiles up to 212 mm in diameter, and a coolant system model TPF 350 / FKA 900 with coolant through the spindle to enhance machining efficiency and tool life.
The machine is also equipped with a fixed 3D probe (Type TS 27 R – RENISHAW) and a Renishaw RLP40Q probe system for precise measurement and quality control during machining processes.
The spindle was replaced in June 2022 and has recorded approximately 4500 operation hours since then. An optional ARMIN M20 SOL automatic robot cell with a FANUC M20iD robot (2024 model) is available.
This machining center is described as being in very good condition and can be inspected under power by appointment. Availability is on request. Full technical specifications are provided in the attached documentation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
vertical machining centers
profile machining centers
Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles.
Built and first use in 2020.
The spindle was replaced in June 2022 and currently has 4500 operation hours.
Including:
Chip conveyor (scraper type)
Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm
Coolant system TPF 350 / FKA 900
Coolant through the spindle
Fixed 3D probe Type TS 27 R – RENISHAW
Renishaw RLP40Q probe system
Full technincal specifications in the attached document.
Optional:
ARMIN M20 SOL automatic robot cell with Robot FANUC M20iD (2024)
Machine is in very good condition and it can be inspected under power upon appointment.
Availability: on request
Cnc Control: SIEMENS 840D
X Axis: 730 mm
Y Axis: 400 mm
Z Axis: 425 mm
Maximum Spindle Speed: 15,000 rpm
Maximum Torque: 140 Nm
Drilling Capacity: Ø 42 mm
Thread Tapping: M30
Tool Magazine Capacity: 20 tools
Tool Taper: DIN 69893 HSK A63
Maximum Tool Diameter: 65 mm
Milling Capacity: 500 cm³/min in E355 steel
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 9 |
| Last activity | Oct. 30, 2026 |
vertical machining centers
profile machining centers
Unique opportunity to purchase this high quality CHIRON 5-axis machining center for profiles.
Built and first use in 2020.
The spindle was replaced in June 2022 and currently has 4500 operation hours.
Including:
Chip conveyor (scraper type)
Profile bar feeder for bar lengths up to 6 m, for guiding profiles up to Ø 212 mm
Coolant system TPF 350 / FKA 900
Coolant through the spindle
Fixed 3D probe Type TS 27 R – RENISHAW
Renishaw RLP40Q probe system
Full technincal specifications in the attached document.
Optional:
ARMIN M20 SOL automatic robot cell with Robot FANUC M20iD (2024)
Machine is in very good condition and it can be inspected under power upon appointment.
Availability: on request
Cnc Control: SIEMENS 840D
X Axis: 730 mm
Y Axis: 400 mm
Z Axis: 425 mm
Maximum Spindle Speed: 15,000 rpm
Maximum Torque: 140 Nm
Drilling Capacity: Ø 42 mm
Thread Tapping: M30
Tool Magazine Capacity: 20 tools
Tool Taper: DIN 69893 HSK A63
Maximum Tool Diameter: 65 mm
Milling Capacity: 500 cm³/min in E355 steel
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This listing offers a high-quality CHIRON 5-axis vertical machining center, specifically designed for profile machining. The machine was built and first put into service in 2020. It features a SIEMENS 840D CNC control system, providing reliable and precise operation.
The machining center has a working range of 730 mm along the X-axis, 400 mm along the Y-axis, and 425 mm along the Z-axis. It is equipped with a spindle capable of reaching speeds up to 15,000 rpm and delivering a maximum torque of 140 Nm. The machine supports drilling up to a diameter of 42 mm and thread tapping up to M30.
Tool handling is facilitated by a 20-tool magazine with a tool taper of DIN 69893 HSK A63, accommodating tools up to 65 mm in diameter. The milling capacity is rated at 500 cm³/min in E355 steel, making it suitable for a range of demanding machining tasks.
Additional features include a chip conveyor of the scraper type, a profile bar feeder designed for bar lengths up to 6 meters and profiles up to 212 mm in diameter, and a coolant system model TPF 350 / FKA 900 with coolant through the spindle to enhance machining efficiency and tool life.
The machine is also equipped with a fixed 3D probe (Type TS 27 R – RENISHAW) and a Renishaw RLP40Q probe system for precise measurement and quality control during machining processes.
The spindle was replaced in June 2022 and has recorded approximately 4500 operation hours since then. An optional ARMIN M20 SOL automatic robot cell with a FANUC M20iD robot (2024 model) is available.
This machining center is described as being in very good condition and can be inspected under power by appointment. Availability is on request. Full technical specifications are provided in the attached documentation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2020 |
| Offers online | 9 |
| Last activity | Oct. 30, 2026 |
профилна система 2020 CHIRON FZ 15 S
profilový systém 2020 CHIRON FZ 15 S
2020 CHIRON FZ 15 S profilsystem
2020 CHIRON FZ 15 S Profilsystem
σύστημα προφίλ 2020 CHIRON FZ 15 S
2020 CHIRON FZ 15 S profile system
sistema de perfil 2020 CHIRON FZ 15 S
système de profil 2020 CHIRON FZ 15 S
profilni sustav 2020 CHIRON FZ 15 S
2020 CHIRON FZ 15 S profil rendszer
sistema di profilo 2020 CHIRON FZ 15 S
2020 CHIRON FZ 15 S profilio sistema
2020 CHIRON FZ 15 S profielsysteem
system profilu 2020 CHIRON FZ 15 S
sistema de perfil 2020 CHIRON FZ 15 S
sistem profil 2020 CHIRON FZ 15 S
профильная система 2020 CHIRON FZ 15 S
профилни систем 2020 CHIRON FZ 15 S
2020 CHIRON FZ 15 S profilsystem
2020 CHIRON FZ 15 S profil sistemi
EN
- Languages
English (GB)