Contact us to receive an offer.
| Manufacturer | Cassel |
|---|---|
| Model | Shark1 |
| Year | 2006 |
| Location | Germany
|
| Category | Handling - Other conveyors |
| Passage length | 200 mm |
| Passage width | 65 mm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 04/11/2026 |
| Product id | P250703218 |
| Language |
Транспортьор Cassel Shark1
Dopravník Cassel Shark1
Cassel Shark1 Transportør
Cassel Shark1 Förderer
Μεταφορέας Cassel Shark1
Cassel Shark1 Conveyor
Transportador Cassel Shark1
Convoyeur Cassel Shark1
Transporter Cassel Shark1
Cassel Shark1 Szállítószalag
Trasportatore Cassel Shark1
Cassel Shark1 Transporteris
Cassel Shark1 Transporteur
Przenośnik Cassel Shark1
Transportador Cassel Shark1
Transportor Cassel Shark1
Cassel Shark1 Конвейер
Transporter Cassel Shark1
Cassel Shark1 Transportör
Konveyör Cassel Shark1
|
This listing is for a Cassel Shark1 metal detector conveyor system, manufactured in 2006. The unit features a stainless steel frame equipped with caster wheels, allowing for easy mobility and adjustable stability. The conveyor utilizes a white plastic modular belt measuring 200 mm in width and 1,100 mm in length, designed to handle product dimensions up to 200 mm in length and 65 mm in width. The passage size of the metal detector tunnel is approximately 250 x 100 mm, suitable for inspecting products within these dimensions.
The conveyor belt height is adjustable, approximately 800 mm with a tolerance of plus or minus 100 mm, facilitating integration into various production lines. The drive system consists of a gear motor, providing a conveyor speed of about 25 meters per minute. The system operates on a supply voltage of 230V / 50Hz.
The metal detector's basic sensitivity levels are specified as 1.0 mm for ferrous metals (FE), 1.2 mm for non-ferrous metals (NFE), and 1.5 mm for stainless steel (SUS 316). The operating direction is set to convey products to the right.
Control and monitoring are managed via a control panel located on the side of the unit, which includes buttons and a digital display. An emergency stop switch is integrated into the frame to ensure safety during operation. The reject function is configured to trigger an alarm and stop the conveyor when metal contaminants are detected.
The overall condition of the equipment appears clean and well-maintained, with only minor surface marks and some wear visible on the metal detector housing. Included with the system is one set of test pieces for calibration or testing purposes. This Cassel Shark1 metal detector conveyor is suitable for applications requiring reliable metal detection within a compact conveyor setup.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Typ: Cassel Shark1
Tunnel size: 250x100mm
Product dimensions 200x65mm(bxh)
Conveyor belt length: 1.100mm
Conveyor belt width: 200mm
Conveyor belt height: 800+/-100mm
Basic sensitivity: FE:1,0/NFE:1,2/SUS(316):1,5mm
Year of manufacture 2006
Conveyor belt Modular belt
Conveyor speed ca.25m/min
Drive Gear motor
Supply voltage 230V / 50Hz
Reject Alarm und Stop
Operating direction in conveying direction righ
Accessoires 1 set test pieces
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 42 |
| Last activity | Nov. 6, 2026 |
Typ: Cassel Shark1
Tunnel size: 250x100mm
Product dimensions 200x65mm(bxh)
Conveyor belt length: 1.100mm
Conveyor belt width: 200mm
Conveyor belt height: 800+/-100mm
Basic sensitivity: FE:1,0/NFE:1,2/SUS(316):1,5mm
Year of manufacture 2006
Conveyor belt Modular belt
Conveyor speed ca.25m/min
Drive Gear motor
Supply voltage 230V / 50Hz
Reject Alarm und Stop
Operating direction in conveying direction righ
Accessoires 1 set test pieces
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Handling - Other conveyors |
| Passage length | 200 mm |
| Passage width | 65 mm |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 04/11/2026 |
| Product id | P250703218 |
| Language |
Транспортьор Cassel Shark1
Dopravník Cassel Shark1
Cassel Shark1 Transportør
Cassel Shark1 Förderer
Μεταφορέας Cassel Shark1
Cassel Shark1 Conveyor
Transportador Cassel Shark1
Convoyeur Cassel Shark1
Transporter Cassel Shark1
Cassel Shark1 Szállítószalag
Trasportatore Cassel Shark1
Cassel Shark1 Transporteris
Cassel Shark1 Transporteur
Przenośnik Cassel Shark1
Transportador Cassel Shark1
Transportor Cassel Shark1
Cassel Shark1 Конвейер
Transporter Cassel Shark1
Cassel Shark1 Transportör
Konveyör Cassel Shark1
|
This listing is for a Cassel Shark1 metal detector conveyor system, manufactured in 2006. The unit features a stainless steel frame equipped with caster wheels, allowing for easy mobility and adjustable stability. The conveyor utilizes a white plastic modular belt measuring 200 mm in width and 1,100 mm in length, designed to handle product dimensions up to 200 mm in length and 65 mm in width. The passage size of the metal detector tunnel is approximately 250 x 100 mm, suitable for inspecting products within these dimensions.
The conveyor belt height is adjustable, approximately 800 mm with a tolerance of plus or minus 100 mm, facilitating integration into various production lines. The drive system consists of a gear motor, providing a conveyor speed of about 25 meters per minute. The system operates on a supply voltage of 230V / 50Hz.
The metal detector's basic sensitivity levels are specified as 1.0 mm for ferrous metals (FE), 1.2 mm for non-ferrous metals (NFE), and 1.5 mm for stainless steel (SUS 316). The operating direction is set to convey products to the right.
Control and monitoring are managed via a control panel located on the side of the unit, which includes buttons and a digital display. An emergency stop switch is integrated into the frame to ensure safety during operation. The reject function is configured to trigger an alarm and stop the conveyor when metal contaminants are detected.
The overall condition of the equipment appears clean and well-maintained, with only minor surface marks and some wear visible on the metal detector housing. Included with the system is one set of test pieces for calibration or testing purposes. This Cassel Shark1 metal detector conveyor is suitable for applications requiring reliable metal detection within a compact conveyor setup.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2017 |
| Offers online | 42 |
| Last activity | Nov. 6, 2026 |
EN
- Languages
English (GB)