| Manufacturer | CABYCAL |
|---|---|
| Model | LPP |
| Year | 2018 |
| Location | Spain
|
Overview
This is a 3-axis CABYCAL LPP automated powder coating line, manufactured in 2018. The line is configured for overhead monorail handling and includes a complete powder application system (Nordson Encore LT), a 5-stage pre-treatment tunnel, drying oven and gas‑fired curing oven. The reciprocator (application axis) provides a maximum vertical stroke of 2,200 mm and the line is rated for up to 90 racks per hour at the top conveyor speed.
Conveyor
- Type: Overhead monorail conveyor (frequency inverter driven)
- Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min)
Reciprocator (application axis)
- Max vertical stroke: 2,200 mm (adjustable)
- Vertical speed: 0.14 to 0.6 m/s (adjustable)
- Positioning movement: Manual adjustment
Part capacity
- Workpiece material: Metal
- Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm
- Gauge clearance (W x H): 300 x 2,200 mm
- Max load: 35 kg per 800 mm hanger rack
- Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min
Powder application system
- Brand/Model: Nordson Encore LT
- Reciprocators: 2x electronic reciprocators
- Automatic guns: 4x automatic powder guns with individual control modules
- Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning
- Air velocity at openings: approx. 0.5 m/s
Line components and thermal equipment
- Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves
- Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans
- Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan
- Max operating temperature: 180°C
Utilities and requirements
- Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz
- Total electrical power: 90 kW (approx. 80 kW line requirement)
- Electrical consumption: ~80% (excluding application booth)
- Heating fuel: Natural gas
- Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery)
- Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application)
- Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet
- Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage
Additional equipment included
- 1x Manual powder gun with integrated rack control unit
- 1x Complete sieving unit with 10 m feed hose
- 1x 36 kg powder hopper
- 1x Recovery venturi pump
Other
- Number of Axes: 3
- Table Load: 35 kg
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details.Conveyor
Type: Overhead monorail conveyor (frequency inverter driven)
Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min)
Reciprocator (application axis)
Max vertical stroke: 2,200 mm (adjustable)
Vertical speed: 0.14 to 0.6 m/s (adjustable)
Positioning movement: Manual adjustment
Part capacity
Workpiece material: Metal
Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm
Gauge clearance (W x H): 300 x 2,200 mm
Max load: 35 kg per 800 mm hanger rack
Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min
Powder application system
Brand/Model: Nordson Encore LT
Reciprocators: 2x electronic reciprocators
Automatic guns: 4x automatic powder guns with individual control modules
Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning
Air velocity at openings: approx. 0.5 m/s
Line components and thermal equipment
Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves
Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans
Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan
Oven burners:
Max operating temperature: 180°C
Utilities and technical requirements
Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz
Total electrical power: 90 kW (approx. 80 kW line requirement)
Electrical consumption: ~80% (excluding application booth)
Heating fuel: Natural gas
Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery)
Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application)
Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet
Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage
Additional equipment
1x Manual powder gun with integrated rack control unit
1x Complete sieving unit with 10 m feed hose
1x 36 kg powder hopper
1x Recovery venturi pump
Number of Axes: 3
Table Load: 35 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 4, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This 3-axis CABYCAL LPP was manufactured in 2018. It features a maximum reciprocator axis stroke of 2,200 mm and a production capacity of up to 90 racks per hour. The system includes a Nordson powder coating application with 4 automatic guns and a comprehensive pre-treatment tunnel. If you are looking to get high-quality powder coating capabilities, consider the CABYCAL LPP automated powder coating line we have for sale. Contact us for further details.Conveyor
Type: Overhead monorail conveyor (frequency inverter driven)
Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min)
Reciprocator (application axis)
Max vertical stroke: 2,200 mm (adjustable)
Vertical speed: 0.14 to 0.6 m/s (adjustable)
Positioning movement: Manual adjustment
Part capacity
Workpiece material: Metal
Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm
Gauge clearance (W x H): 300 x 2,200 mm
Max load: 35 kg per 800 mm hanger rack
Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min
Powder application system
Brand/Model: Nordson Encore LT
Reciprocators: 2x electronic reciprocators
Automatic guns: 4x automatic powder guns with individual control modules
Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning
Air velocity at openings: approx. 0.5 m/s
Line components and thermal equipment
Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves
Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans
Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan
Oven burners:
Max operating temperature: 180°C
Utilities and technical requirements
Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz
Total electrical power: 90 kW (approx. 80 kW line requirement)
Electrical consumption: ~80% (excluding application booth)
Heating fuel: Natural gas
Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery)
Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application)
Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet
Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage
Additional equipment
1x Manual powder gun with integrated rack control unit
1x Complete sieving unit with 10 m feed hose
1x 36 kg powder hopper
1x Recovery venturi pump
Number of Axes: 3
Table Load: 35 kg
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Overview
This is a 3-axis CABYCAL LPP automated powder coating line, manufactured in 2018. The line is configured for overhead monorail handling and includes a complete powder application system (Nordson Encore LT), a 5-stage pre-treatment tunnel, drying oven and gas‑fired curing oven. The reciprocator (application axis) provides a maximum vertical stroke of 2,200 mm and the line is rated for up to 90 racks per hour at the top conveyor speed.
Conveyor
- Type: Overhead monorail conveyor (frequency inverter driven)
- Speed range: 0.75 to 1.2 m/min (design speed 0.75 m/min)
Reciprocator (application axis)
- Max vertical stroke: 2,200 mm (adjustable)
- Vertical speed: 0.14 to 0.6 m/s (adjustable)
- Positioning movement: Manual adjustment
Part capacity
- Workpiece material: Metal
- Max part dimensions (L x W x H): 1,000 x 100 x 2,000 mm
- Gauge clearance (W x H): 300 x 2,200 mm
- Max load: 35 kg per 800 mm hanger rack
- Production capacity: 56 racks/hour at 0.75 m/min; 90 racks/hour at 1.2 m/min
Powder application system
- Brand/Model: Nordson Encore LT
- Reciprocators: 2x electronic reciprocators
- Automatic guns: 4x automatic powder guns with individual control modules
- Powder booth and recovery: Booth with recovery cyclone and absolute filter with automatic pulse-jet cleaning
- Air velocity at openings: approx. 0.5 m/s
Line components and thermal equipment
- Pre-treatment tunnel: 5-stage cleaning tunnel with chemical baths, vapor extraction fan, advance solenoid valves
- Drying oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 2x air curtain fans
- Curing (polymerization) oven: Gas-fired, internal heat exchanger, 2x air recirculation fans, 1x air curtain fan, 1x top extraction fan
- Max operating temperature: 180°C
Utilities and requirements
- Electrical connection: 400 VAC, 3-phase + neutral + ground, 50 Hz
- Total electrical power: 90 kW (approx. 80 kW line requirement)
- Electrical consumption: ~80% (excluding application booth)
- Heating fuel: Natural gas
- Thermal power: 520 kW total (650 kW installed capacity / ~420 kW consumption with heat recovery)
- Compressed air: Clean, dry air at 6–8 bar (2x 1/2" connections + 1x 1" connection for application)
- Reverse osmosis water: 1-point distribution (TTS) at 2–3 bar; ~600 l/h via 2" inlet
- Building requirements: 4–5 roof penetrations for extraction chimneys; wastewater sump/trench recommended for pre-treatment drainage
Additional equipment included
- 1x Manual powder gun with integrated rack control unit
- 1x Complete sieving unit with 10 m feed hose
- 1x 36 kg powder hopper
- 1x Recovery venturi pump
Other
- Number of Axes: 3
- Table Load: 35 kg
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2044 |
| Last activity | Nov. 4, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
CABYCAL LPP – автоматизирана линия за прахово боядисване
Automatizovaná linka na práškové lakování CABYCAL LPP
CABYCAL LPP automatiseret pulverlakeringlinje
CABYCAL LPP – Automatisierte Pulverbeschichtungsanlage
Αυτοματοποιημένη γραμμή επικάλυψης με σκόνη CABYCAL LPP
CABYCAL LPP Automated Powder Coating Line
Línea automatizada de recubrimiento en polvo CABYCAL LPP
Ligne automatisée de revêtement par poudrage CABYCAL LPP
CABYCAL LPP automatizirana linija za praškovno lakiranje
CABYCAL LPP automatizált porfestő sor
Linea automatizzata di verniciatura a polvere CABYCAL LPP
„CABYCAL LPP“ automatizuota miltelinio dažymo linija
CABYCAL LPP geautomatiseerde poedercoatinglijn
Zautomatyzowana linia do malowania proszkowego CABYCAL LPP
Linha automatizada de revestimento a pó CABYCAL LPP
Linia automată de vopsire cu pulbere CABYCAL LPP
Автоматическая линия порошковой окраски CABYCAL LPP
CABYCAL LPP automatizovana linija za praškasto premazivanje
CABYCAL LPP – automatiserad pulverlackeringslinje
CABYCAL LPP Otomatik Toz Boya Kaplama Hattı
EN
- Languages
English (GB)