| Manufacturer | Bobst |
|---|---|
| Model | SP 102 E II |
| Year | 1999 |
| Location | Italy
|
| Category | Die-cutters / Embossers / Hot foil |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 28/10/2026 |
| Product id | P251219119 |
| Language |
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
|
This listing is for a Bobst SP 102 E II die-cutting machine, manufactured in 1999 by Bobst SA, Switzerland. It is a large industrial die-cutter featuring white, green, and gray panels. The machine is equipped with a control panel containing various buttons and switches located on the side and front for operational control. A handwheel on the side allows for manual adjustments. The machine includes a large flat metal table surface in front, facilitating material handling during operation.
For material feeding and delivery, the machine is fitted with a non-stop feeder with swords and a non-stop delivery rake, as well as a non-stop delivery system with a grill. The pull lay is positioned on the operator side to enhance usability. The die-cutter has a red conveyor belt extending from the machine for output, supported by a metal framework with wheels for mobility, allowing for easier material transport.
Access to the machine is provided via stairs and a platform, ensuring safe and convenient operation. The electrical cabinet with control buttons is integrated into the machine's side panel. The machine's exterior panels appear intact with minor wear, and the overall condition is clean and well-maintained. A power cable with a blue plug is connected to the machine, indicating readiness for operation.
Included with the machine are all books such as electrical schemes, manual instruction books, spare parts books, and standard tools, supporting maintenance and operation. A wheeled metal container is positioned near the conveyor belt, likely for material handling or waste collection.
This Bobst die-cutter is designed for efficient and quick job changeovers, making it suitable for industrial die-cutting, embossing, and hot foil applications. Its robust construction and included accessories provide a comprehensive solution for production environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
1 Centerline system for quick job changeover
All books, electrical scheme, manual instruction books, spare parts books and standard tools
Electronic device for sheet travel control
Adjustable centering on stripping station and on delivery
Control cabinet cooling unit
Suction unit
Main motor asynchronous with frequency converter control
Bobst-Electronic for the machine control
Bernoulli (Blower system for thin paper)
Non-stop feeder with swords
Pull lay operator side
Pile tray wit handle allowing manul lateral correction of the pile during production
Pile lifting controlled by pressfoot
Real pile guides (OS and OOS)
Side blowers adjustable with Centerline marks
Safety system for lowering the pile tray
Covered with an anti-static stainless steel plate
Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill, allows you to adapt the feeder cycle to that of the platen
4 Front lays, adjustable in pairs with front register control, with sheet presence
Double sheet detector
Sheet-hold down device (Introduction sheets guide in gripper)
Upper transport equipment for paper, paperboard and corrugated board
Grippers re-opening device
Equipment centering and locking
Locking of the chase against the upper beam
Resocell: synthetic material supporting plate, Thickness 23,5 mm
E-1 1 UPPER FRAME WITH FIXED BOTTOM. BOTTOM SHEET, 2 MM THICK AND SYNTHETIC PROTECTION PLATE, 1 MM THICK
1 Cutting plate (E-4)
Upper chase-fixed bottom (E-1)
1 Upper pull-out frame (F-2)
1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter
1 Fastening equipment for stripping die (F-22) Including crossbars and clamps
1 lower pull-out frame (F-8)
F-81 lower stripping equipment for waste stripping (F-81) Including crossbars, pins and supports
CENTRAL PULL-OUT FRAME QUICKLOCK (STRIPPING)
F-76 FASTENING EQUIPMENT FOR STRIPPING TABLE ON CENTRAL PULL-OUT FRAME QUICK LOCK It allows to equip a stripping table to install it on central pull-out frame quick-lock
Non-stop delivery with grill
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 51 |
| Last activity | Oct. 29, 2026 |
70 years’ experience in 3th Generation family business
With more than 70 years’ experience, Camporese Macchine Grafiche Spa supplies machines and technology for Packaging and Printing Industries.
Camporese is run by third generation, is a successful company, well capitalized, with one-of-a-kind know-how, proud of its many achievement, internationally well-known, have a direct bearing on long-term business relationship with all its internal and external stakeholders.
1 Centerline system for quick job changeover
All books, electrical scheme, manual instruction books, spare parts books and standard tools
Electronic device for sheet travel control
Adjustable centering on stripping station and on delivery
Control cabinet cooling unit
Suction unit
Main motor asynchronous with frequency converter control
Bobst-Electronic for the machine control
Bernoulli (Blower system for thin paper)
Non-stop feeder with swords
Pull lay operator side
Pile tray wit handle allowing manul lateral correction of the pile during production
Pile lifting controlled by pressfoot
Real pile guides (OS and OOS)
Side blowers adjustable with Centerline marks
Safety system for lowering the pile tray
Covered with an anti-static stainless steel plate
Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill, allows you to adapt the feeder cycle to that of the platen
4 Front lays, adjustable in pairs with front register control, with sheet presence
Double sheet detector
Sheet-hold down device (Introduction sheets guide in gripper)
Upper transport equipment for paper, paperboard and corrugated board
Grippers re-opening device
Equipment centering and locking
Locking of the chase against the upper beam
Resocell: synthetic material supporting plate, Thickness 23,5 mm
E-1 1 UPPER FRAME WITH FIXED BOTTOM. BOTTOM SHEET, 2 MM THICK AND SYNTHETIC PROTECTION PLATE, 1 MM THICK
1 Cutting plate (E-4)
Upper chase-fixed bottom (E-1)
1 Upper pull-out frame (F-2)
1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter
1 Fastening equipment for stripping die (F-22) Including crossbars and clamps
1 lower pull-out frame (F-8)
F-81 lower stripping equipment for waste stripping (F-81) Including crossbars, pins and supports
CENTRAL PULL-OUT FRAME QUICKLOCK (STRIPPING)
F-76 FASTENING EQUIPMENT FOR STRIPPING TABLE ON CENTRAL PULL-OUT FRAME QUICK LOCK It allows to equip a stripping table to install it on central pull-out frame quick-lock
Non-stop delivery with grill
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Die-cutters / Embossers / Hot foil |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Last availability date | 28/10/2026 |
| Product id | P251219119 |
| Language |
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
Bobst SP 102 E II
|
This listing is for a Bobst SP 102 E II die-cutting machine, manufactured in 1999 by Bobst SA, Switzerland. It is a large industrial die-cutter featuring white, green, and gray panels. The machine is equipped with a control panel containing various buttons and switches located on the side and front for operational control. A handwheel on the side allows for manual adjustments. The machine includes a large flat metal table surface in front, facilitating material handling during operation.
For material feeding and delivery, the machine is fitted with a non-stop feeder with swords and a non-stop delivery rake, as well as a non-stop delivery system with a grill. The pull lay is positioned on the operator side to enhance usability. The die-cutter has a red conveyor belt extending from the machine for output, supported by a metal framework with wheels for mobility, allowing for easier material transport.
Access to the machine is provided via stairs and a platform, ensuring safe and convenient operation. The electrical cabinet with control buttons is integrated into the machine's side panel. The machine's exterior panels appear intact with minor wear, and the overall condition is clean and well-maintained. A power cable with a blue plug is connected to the machine, indicating readiness for operation.
Included with the machine are all books such as electrical schemes, manual instruction books, spare parts books, and standard tools, supporting maintenance and operation. A wheeled metal container is positioned near the conveyor belt, likely for material handling or waste collection.
This Bobst die-cutter is designed for efficient and quick job changeovers, making it suitable for industrial die-cutting, embossing, and hot foil applications. Its robust construction and included accessories provide a comprehensive solution for production environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 51 |
| Last activity | Oct. 29, 2026 |
70 years’ experience in 3th Generation family business
With more than 70 years’ experience, Camporese Macchine Grafiche Spa supplies machines and technology for Packaging and Printing Industries.
Camporese is run by third generation, is a successful company, well capitalized, with one-of-a-kind know-how, proud of its many achievement, internationally well-known, have a direct bearing on long-term business relationship with all its internal and external stakeholders.
EN
- Languages
English (GB)