Contact us to receive an offer.
| Manufacturer | BILLION |
|---|---|
| Model | H 430 80 PROXIMA |
| Year | 2001 |
| Location | France
|
This BILLION H 430 80 PROXIMA injection moulding machine, manufactured in 2001, offers a clamping force of 80 tons (800 kN), suitable for a variety of injection moulding applications. The machine features a screw diameter of 50 mm and a calculated injection volume of 361 cm³, with a maximum injection rate of 206 cm³/s. It operates with a material pressure of up to 1296 bar, ensuring efficient molding under high pressure.
The closing unit includes an opening stroke of 330 mm and supports a minimum mold thickness of 200 mm. The distance between tie-bars is 460 mm both horizontally and vertically, providing a stable setup for mold installation. The platen dimensions measure 660 mm in length and 620 mm in width, accommodating a range of mold sizes.
This model is equipped with a control panel featuring a screen and buttons located centrally on the machine, allowing for straightforward operation and monitoring. Additionally, there are two red handles on the front side near the control panel, likely for operational or safety purposes. The machine appears clean and in good physical condition with no visible damage, indicating it has been well maintained.
The total installed power is 18 kW, which supports the machine's operational requirements. This injection moulding machine is suitable for industrial use where reliable clamping force and precise injection control are required. The presence of the control panel and ergonomic handles enhances usability and safety during operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Screw diameter: 50 mm
Calculated injection volume: 361 cm3
Max. injection rate: 206 cm3/s
Material pressure: 1296 bar
Closing unit
Closing force: 800 kN
Opening stroke: 330 mm
Minimum mold thickness: 200 mm
Distance between tie-bars: 460 x 460 mm
Platen dimensions: 660 x 620 mm
General
Total installed power: 18 kW
Other
Commissioning: 2001
Tonnage: 80
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | Nov. 10, 2026 |
Screw diameter: 50 mm
Calculated injection volume: 361 cm3
Max. injection rate: 206 cm3/s
Material pressure: 1296 bar
Closing unit
Closing force: 800 kN
Opening stroke: 330 mm
Minimum mold thickness: 200 mm
Distance between tie-bars: 460 x 460 mm
Platen dimensions: 660 x 620 mm
General
Total installed power: 18 kW
Other
Commissioning: 2001
Tonnage: 80
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This BILLION H 430 80 PROXIMA injection moulding machine, manufactured in 2001, offers a clamping force of 80 tons (800 kN), suitable for a variety of injection moulding applications. The machine features a screw diameter of 50 mm and a calculated injection volume of 361 cm³, with a maximum injection rate of 206 cm³/s. It operates with a material pressure of up to 1296 bar, ensuring efficient molding under high pressure.
The closing unit includes an opening stroke of 330 mm and supports a minimum mold thickness of 200 mm. The distance between tie-bars is 460 mm both horizontally and vertically, providing a stable setup for mold installation. The platen dimensions measure 660 mm in length and 620 mm in width, accommodating a range of mold sizes.
This model is equipped with a control panel featuring a screen and buttons located centrally on the machine, allowing for straightforward operation and monitoring. Additionally, there are two red handles on the front side near the control panel, likely for operational or safety purposes. The machine appears clean and in good physical condition with no visible damage, indicating it has been well maintained.
The total installed power is 18 kW, which supports the machine's operational requirements. This injection moulding machine is suitable for industrial use where reliable clamping force and precise injection control are required. The presence of the control panel and ergonomic handles enhances usability and safety during operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2010 |
| Offers online | 84 |
| Last activity | Nov. 10, 2026 |
Машина за леене под налягане BILLION H 430 80 PROXIMA
Vstřikolis BILLION H 430 80 PROXIMA
BILLION H 430 80 PROXIMA Sprøjtestøbemaskine
BILLION H 430 80 PROXIMA Spritzgießmaschine
Μηχανή χύτευσης με έγχυση BILLION H 430 80 PROXIMA
BILLION H 430 80 PROXIMA Injection moulding machine
Inyectora de plástico BILLION H 430 80 PROXIMA
Presse à injecter BILLION H 430 80 PROXIMA
Stroj za injekcijsko prešanje BILLION H 430 80 PROXIMA
BILLION H 430 80 PROXIMA Fröccsöntő gép
Pressa ad iniezione BILLION H 430 80 PROXIMA
Įpurškimo formavimo mašina BILLION H 430 80 PROXIMA
BILLION H 430 80 PROXIMA Spuitgietmachine
Wtryskarka BILLION H 430 80 PROXIMA
Máquina de injecção BILLION H 430 80 PROXIMA
Mașină de turnat prin injecție BILLION H 430 80 PROXIMA
BILLION H 430 80 PROXIMA Термопластавтомат
Mašina za brizganje BILLION H 430 80 PROXIMA
BILLION H 430 80 PROXIMA Formsprutningsmaskin
Enjeksiyon kalıplama makinesi BILLION H 430 80 PROXIMA
EN
- Languages
English (GB)