| Manufacturer | BIESSE |
|---|---|
| Model | STREAM B1 7.5 |
| Year | 2003 |
| Location | Belgium
|
The BIESSE STREAM B1 7.5 is a single-sided industrial edgebanding machine manufactured in 2003, designed for processing panel thicknesses ranging from 10 mm up to 60 mm, with an edge thickness capability of 0.3 mm to 3 mm. It accommodates minimum and maximum panel widths of 100 mm to 3200 mm, with a panel pass of 35 mm, and supports minimum panel lengths starting at 150 mm. The feed advance speed ranges from 10 to 24 meters per minute, enabling efficient production throughput.
This model is equipped with a glue tank, facilitating the application of adhesive during the edgebanding process. The machine features a comprehensive set of equipment including a detergent spray system, a squaring device powered by two 3.5 kW motors, and a coil magazine capable of holding coil diameters up to 800 mm with edge heights between 15 mm and 65 mm. The hot melt unit is of type SP 3, complemented by lateral pressure rollers to ensure proper edge application.
Additional components include end trims (type IT90) with two 0.3 kW motors suitable for edges up to 3 mm, a rough trimming unit (type RS 10) operating at 12,000 rpm with two 1.3 kW motors, and a contour trimming unit (type AR 50) featuring four-fold tool changers powered by two 0.65 kW motors. The machine also incorporates a profile scraping unit (RB 30), glue scraping, a buffing unit, and a hot air blower (PH10) to enhance finishing quality. Control is managed via Sintra 1.01 controls.
Visually, the machine presents as clean and well-maintained, with no visible damage. It includes a conveyor or feed table with protective guards on the right side, multiple dust extraction hoses connected to the machine, and a large roll of edge banding material positioned on a spindle. The control panel features various buttons and switches, all appearing intact and in good condition, supporting efficient and safe operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Edges: coils 0,3 to 3 mm
Panel thickness: 10 - 60 mm
Min/max panel width 100 / 3200 mm (panel pass 35 mm)
Min panel length 150 mm
Feedspeed 10 - 24 m/min
Equipment:
- Detergent spray system
- squaring device, 2 x 3,5 kW motors
- Coil magazine, coil diameter 800 mm, edge height 15 - 65 mm
- hot melt unit, type SP 3
- lateral pressure rollers
- end trims type IT90, 2 x 0,3 kW (edges up to 3 mm)
- rough trimming type RS 10, 2 x 1,3 kW, 12000 r/min
- contour trimming type AR 50, with 4-fold toolchangers, 2 x 0,65 kW
- profile scraping RB 30
- glue scraping
- Buffing unit
- hot air blower PH10
Sintra 1.01 controlls
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 71 |
| Last activity | Nov. 10, 2026 |
Edges: coils 0,3 to 3 mm
Panel thickness: 10 - 60 mm
Min/max panel width 100 / 3200 mm (panel pass 35 mm)
Min panel length 150 mm
Feedspeed 10 - 24 m/min
Equipment:
- Detergent spray system
- squaring device, 2 x 3,5 kW motors
- Coil magazine, coil diameter 800 mm, edge height 15 - 65 mm
- hot melt unit, type SP 3
- lateral pressure rollers
- end trims type IT90, 2 x 0,3 kW (edges up to 3 mm)
- rough trimming type RS 10, 2 x 1,3 kW, 12000 r/min
- contour trimming type AR 50, with 4-fold toolchangers, 2 x 0,65 kW
- profile scraping RB 30
- glue scraping
- Buffing unit
- hot air blower PH10
Sintra 1.01 controlls
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The BIESSE STREAM B1 7.5 is a single-sided industrial edgebanding machine manufactured in 2003, designed for processing panel thicknesses ranging from 10 mm up to 60 mm, with an edge thickness capability of 0.3 mm to 3 mm. It accommodates minimum and maximum panel widths of 100 mm to 3200 mm, with a panel pass of 35 mm, and supports minimum panel lengths starting at 150 mm. The feed advance speed ranges from 10 to 24 meters per minute, enabling efficient production throughput.
This model is equipped with a glue tank, facilitating the application of adhesive during the edgebanding process. The machine features a comprehensive set of equipment including a detergent spray system, a squaring device powered by two 3.5 kW motors, and a coil magazine capable of holding coil diameters up to 800 mm with edge heights between 15 mm and 65 mm. The hot melt unit is of type SP 3, complemented by lateral pressure rollers to ensure proper edge application.
Additional components include end trims (type IT90) with two 0.3 kW motors suitable for edges up to 3 mm, a rough trimming unit (type RS 10) operating at 12,000 rpm with two 1.3 kW motors, and a contour trimming unit (type AR 50) featuring four-fold tool changers powered by two 0.65 kW motors. The machine also incorporates a profile scraping unit (RB 30), glue scraping, a buffing unit, and a hot air blower (PH10) to enhance finishing quality. Control is managed via Sintra 1.01 controls.
Visually, the machine presents as clean and well-maintained, with no visible damage. It includes a conveyor or feed table with protective guards on the right side, multiple dust extraction hoses connected to the machine, and a large roll of edge banding material positioned on a spindle. The control panel features various buttons and switches, all appearing intact and in good condition, supporting efficient and safe operation.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 71 |
| Last activity | Nov. 10, 2026 |
BIESSE STREAM B1 7.5 Едностранна машина за разкрояване и кантиране
BIESSE STREAM B1 7.5 Jednostranná ořezávačka hran a čtverců
BIESSE STREAM B1 7.5 Kantlimeringsmaskine, enkeltsidet
BIESSE STREAM B1 7.5 Quadrier- und Kantenanleimmaschine einseitig
BIESSE STREAM B1 7.5 Μηχανή τετραγωνισμού και περιγράμματος άκρων μονής όψης
BIESSE STREAM B1 7.5 Squaring And Edgebanding Machine Single Sided
Escuadradora y tapacantos BIESSE STREAM B1 7.5 Una cara
BIESSE STREAM B1 7.5 Machine à équarrir et à plaquer sur chant simple face
BIESSE STREAM B1 7.5 Stroj za uglačavanje i rubnu traku jednostrano
BIESSE STREAM B1 7.5 Egyoldalas négyszögelő és élszegélyező gép
BIESSE STREAM B1 7.5 Squadratrice e bordatrice monofacciale
BIESSE STREAM B1 7.5 vienpusio skardinimo ir kraštų apklijavimo staklės
BIESSE STREAM B1 7.5 Afkort- en kantmachine enkelzijdig
BIESSE STREAM B1 7.5 Jednostronna okleiniarka do prostowania i oklejania krawędzi
BIESSE STREAM B1 7.5 Esquadrejadeira e biseladora de uma face
BIESSE STREAM B1 7.5 Squaring și Edgebanding Machine Single Sided
BIESSE STREAM B1 7.5 Односторонний станок для обрезки квадратов и кромки
BIESSE STREAM B1 7.5 Mašina za kvadratno i ivično trakiranje jednostrana
BIESSE STREAM B1 7.5 Fräs- och kantlistningsmaskin, enkelsidig
BIESSE STREAM B1 7.5 Gönyeleme ve Kenar Bantlama Makinesi Tek Taraflı
EN
- Languages
English (GB)