Contact us to receive an offer.
| Manufacturer | Biesse |
|---|---|
| Model | Rover C9 |
| Year | |
| Location | Italy
|
Brand: Biesse
Model: Rover C9
Technical condition: sold as-is, where-is
Status: available for viewing
Overview:
This listing is for a Biesse Rover C9 5‑axis machining center offered as-is, where-is. The machine is currently disassembled; the disassembly was carried out by technicians. According to the seller’s notes, it was in excellent working condition until it was disassembled a few months ago. There are no videos available showing the machine in operation.
Work envelope and configurations:
- Configuration 1: X = 4850 mm, Y = 1935 mm, Z = 205 mm
- Configuration 2: X = 4600 mm, Y = 1935 mm, Z = 205 mm
- Configuration 3: X = 4600 mm, Y = 1935 mm, Z = 275 mm
Main features and equipment (as listed):
- 5-axis interpolating machining unit
- Additional Z-axis carriage for rear machining units, with independent Z control
- 18 kW electric spindle, HSK F63 interface, liquid-cooled
- 10-position turret tool magazine; pick-up tool magazine; 22-position belt-type tool magazine (180 mm pitch)
- 1,600 W coolant control unit for electric spindles
- Automatic lubrication system
- LICOM Alphacam 3D CAD/CAM — 5-axis
Handling, clamping and material handling:
- 8 ATS tables (L = 1,525 mm) with 32 carriages
- Automatic electronic positioning of 8 EPS work tables
- Vacuum system divided into 2 work areas along the X-axis; vacuum pump rated 250 m³/h
- Pneumatic clamping system divided into 2 work areas along the X-axis
- 8 stops (140 mm stroke, height 1175 mm, L options 1280–1525–1800 mm)
- 4 side stops (2 right + 2 left) with 140 mm stroke, plus 2 additional side stops (1 right + 1 left)
- Pneumatic system for bar lifters with 2 independent work areas in X; 6 bar lifters for loading (modules H = 74 mm)
- 2 Uniclamp clamps with 2-motion adjustment, thickness range 15–55, quick-release coupling, H = 74
- 12 clamping devices for securing narrow workpieces; stop for panels with protruding edging
- Chip and scrap conveyor belt
Additional tooling and heads:
- BH31 drilling head with 25 vertical spindles and 3 horizontal spindles, liquid cooling, skimmer-type chip extraction
- Leitz‑Biesse HSK F63 ERC40 tool holder (right-hand rotation)
- HSK F63 tool holder with integrated flange for blades up to 350 mm diameter
Notes and inspection:
- Offered as-is, where-is. No operational videos available.
- The machine is disassembled; prospective buyers should inspect the equipment and verify completeness and condition prior to purchase. Contact the seller to arrange viewing and to request any additional documentation or clarification.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
MACHINING CENTER Brand: Biesse
Model: Rover C9
Technical condition: as-is, where-is
Status: available for viewing
The machine is currently disassembled and located at our facility; it was in excellent working condition until it was disassembled a few months ago.
The disassembly was performed by our technicians.
Unfortunately, there are no videos of the machine in operation.
Working ranges, configuration 1:
X = 4850 mm
Y = 1935 mm
Z = 205 mm
Working ranges, configuration 2:
X = 4600 mm
Y = 1935 mm
Z = 205 mm
Working ranges for configuration 3:
X = 4,600 mm
Y = 1,935 mm
Z = 275 mm
- 8 ATS tables – L = 1,525 mm – 32 carriages
- Automatic electronic positioning of 8 EPS work tables
- Chip and scrap conveyor belt
- Vacuum system divided into 2 work areas along the X-axis
- Pneumatic clamping system divided into 2 work areas along the X-axis
- 8 stops with 140 mm stroke, height 1175 mm, L = 1280–1525–1800 mm
- 4 side stops, with 140 mm stroke (2 right + 2 left) with system
- 2 additional side stops, with a stroke of 140 mm (1 right + 1 left)
- Pneumatic system for bar lifters – 2 independent work areas in the X direction
- 6 bar lifters to assist with loading, for modules H=74 mm
- 2 Uniclamp clamps with 2-motion adjustment, thickness range 15–55, quick-release coupling, H=74
- Vacuum system for 1 vacuum pump rated at 250 m³/h
- Vacuum pump, 250 m³/h
- 5-axis interpolating machining unit
- Additional Z-axis carriage for rear machining units, controlled by an independent Z-axis
- 18 kW (24.5 HP) electric spindle, HSK F63 interface, liquid-cooled
- 10-position turret tool magazine
- Pick-up tool magazine
- 22-position belt-type tool magazine – 180 mm pitch
- 1,600 W coolant control unit for electric spindles
- Automatic lubrication system
LICOM System Alphacam 3D CAD/CAM – 5-axis
BH31 drilling head with
- 25 vertical spindles
- 3 horizontal spindles
- Liquid cooling
- Skimmer-type chip extraction
Leitz-Biesse HSK F63 ERC40 tool holder, right-hand rotation
HSK F63 tool holder with integrated flange for blades up to 350 mm in diameter
12 clamping devices for securing narrow workpieces
Stop for panels with protruding edging
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What brand is this machining center?
This Biesse machining center.
What type of equipment is this Rover C9?
This Rover C9 5-axis CNC centre for wood.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 28 |
| Last activity | Oct. 27, 2026 |
MACHINING CENTER Brand: Biesse
Model: Rover C9
Technical condition: as-is, where-is
Status: available for viewing
The machine is currently disassembled and located at our facility; it was in excellent working condition until it was disassembled a few months ago.
The disassembly was performed by our technicians.
Unfortunately, there are no videos of the machine in operation.
Working ranges, configuration 1:
X = 4850 mm
Y = 1935 mm
Z = 205 mm
Working ranges, configuration 2:
X = 4600 mm
Y = 1935 mm
Z = 205 mm
Working ranges for configuration 3:
X = 4,600 mm
Y = 1,935 mm
Z = 275 mm
- 8 ATS tables – L = 1,525 mm – 32 carriages
- Automatic electronic positioning of 8 EPS work tables
- Chip and scrap conveyor belt
- Vacuum system divided into 2 work areas along the X-axis
- Pneumatic clamping system divided into 2 work areas along the X-axis
- 8 stops with 140 mm stroke, height 1175 mm, L = 1280–1525–1800 mm
- 4 side stops, with 140 mm stroke (2 right + 2 left) with system
- 2 additional side stops, with a stroke of 140 mm (1 right + 1 left)
- Pneumatic system for bar lifters – 2 independent work areas in the X direction
- 6 bar lifters to assist with loading, for modules H=74 mm
- 2 Uniclamp clamps with 2-motion adjustment, thickness range 15–55, quick-release coupling, H=74
- Vacuum system for 1 vacuum pump rated at 250 m³/h
- Vacuum pump, 250 m³/h
- 5-axis interpolating machining unit
- Additional Z-axis carriage for rear machining units, controlled by an independent Z-axis
- 18 kW (24.5 HP) electric spindle, HSK F63 interface, liquid-cooled
- 10-position turret tool magazine
- Pick-up tool magazine
- 22-position belt-type tool magazine – 180 mm pitch
- 1,600 W coolant control unit for electric spindles
- Automatic lubrication system
LICOM System Alphacam 3D CAD/CAM – 5-axis
BH31 drilling head with
- 25 vertical spindles
- 3 horizontal spindles
- Liquid cooling
- Skimmer-type chip extraction
Leitz-Biesse HSK F63 ERC40 tool holder, right-hand rotation
HSK F63 tool holder with integrated flange for blades up to 350 mm in diameter
12 clamping devices for securing narrow workpieces
Stop for panels with protruding edging
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What brand is this machining center?
This Biesse machining center.
What type of equipment is this Rover C9?
This Rover C9 5-axis CNC centre for wood.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Brand: Biesse
Model: Rover C9
Technical condition: sold as-is, where-is
Status: available for viewing
Overview:
This listing is for a Biesse Rover C9 5‑axis machining center offered as-is, where-is. The machine is currently disassembled; the disassembly was carried out by technicians. According to the seller’s notes, it was in excellent working condition until it was disassembled a few months ago. There are no videos available showing the machine in operation.
Work envelope and configurations:
- Configuration 1: X = 4850 mm, Y = 1935 mm, Z = 205 mm
- Configuration 2: X = 4600 mm, Y = 1935 mm, Z = 205 mm
- Configuration 3: X = 4600 mm, Y = 1935 mm, Z = 275 mm
Main features and equipment (as listed):
- 5-axis interpolating machining unit
- Additional Z-axis carriage for rear machining units, with independent Z control
- 18 kW electric spindle, HSK F63 interface, liquid-cooled
- 10-position turret tool magazine; pick-up tool magazine; 22-position belt-type tool magazine (180 mm pitch)
- 1,600 W coolant control unit for electric spindles
- Automatic lubrication system
- LICOM Alphacam 3D CAD/CAM — 5-axis
Handling, clamping and material handling:
- 8 ATS tables (L = 1,525 mm) with 32 carriages
- Automatic electronic positioning of 8 EPS work tables
- Vacuum system divided into 2 work areas along the X-axis; vacuum pump rated 250 m³/h
- Pneumatic clamping system divided into 2 work areas along the X-axis
- 8 stops (140 mm stroke, height 1175 mm, L options 1280–1525–1800 mm)
- 4 side stops (2 right + 2 left) with 140 mm stroke, plus 2 additional side stops (1 right + 1 left)
- Pneumatic system for bar lifters with 2 independent work areas in X; 6 bar lifters for loading (modules H = 74 mm)
- 2 Uniclamp clamps with 2-motion adjustment, thickness range 15–55, quick-release coupling, H = 74
- 12 clamping devices for securing narrow workpieces; stop for panels with protruding edging
- Chip and scrap conveyor belt
Additional tooling and heads:
- BH31 drilling head with 25 vertical spindles and 3 horizontal spindles, liquid cooling, skimmer-type chip extraction
- Leitz‑Biesse HSK F63 ERC40 tool holder (right-hand rotation)
- HSK F63 tool holder with integrated flange for blades up to 350 mm diameter
Notes and inspection:
- Offered as-is, where-is. No operational videos available.
- The machine is disassembled; prospective buyers should inspect the equipment and verify completeness and condition prior to purchase. Contact the seller to arrange viewing and to request any additional documentation or clarification.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2018 |
| Offers online | 28 |
| Last activity | Oct. 27, 2026 |
Петосеви CNC обработващ център за дърво Biesse Rover C9
Pětiosé CNC obráběcí centrum na dřevo Biesse Rover C9
Biesse Rover C9 5-akset CNC-træbearbejdningscenter
Biesse Rover C9 5-Achs-CNC-Holzbearbeitungszentrum
Κέντρο κατεργασίας CNC 5 αξόνων για ξύλο Biesse Rover C9
Biesse Rover C9 5-axis wood CNC machining center
Centro de mecanizado CNC de 5 ejes para madera Biesse Rover C9
Centre d’usinage CNC 5 axes pour le bois Biesse Rover C9
Petosno CNC obradno središte za drvo Biesse Rover C9
Biesse Rover C9 Öttengelyes CNC faipari megmunkálóközpont
Centro di lavoro CNC a 5 assi per legno Biesse Rover C9
Biesse Rover C9 Penkių ašių CNC medienos apdirbimo centras
Biesse Rover C9 5-assig CNC-houtbewerkingscentrum
Pięcioosiowe centrum obróbcze CNC do drewna Biesse Rover C9
Centro de usinagem CNC de 5 eixos para madeira Biesse Rover C9
Centru de prelucrare CNC cu 5 axe pentru lemn Biesse Rover C9
Biesse Rover C9 Пятиосевой деревообрабатывающий обрабатывающий центр с ЧПУ
Petosni CNC obradni centar za drvo Biesse Rover C9
Biesse Rover C9 5-axligt CNC-träbearbetningscenter
5 eksenli CNC ahşap işleme merkezi Biesse Rover C9
EN
- Languages
English (GB)