| Manufacturer | BATTENFELD |
|---|---|
| Model | BEX2-110-28V |
| Year | 2007 |
| Location | Ukraine
|
This listing features a Battenfeld twin screw extruder, model BEX2-110-28V, manufactured in 2007. The extruder has a screw diameter of 110 mm with two parallel screws and a screw length-to-diameter (L/D) ratio of 28. The main drive power is rated at 96 kW. It is designed to handle a maximum profile width of 700 mm and has an output capacity of approximately 600 kg/h.
The extruder is part of a complete line sold as a set, which includes several additional components for extrusion processing. These include a Battenfeld KP 404 V4 / 75 calibration table from 2010 measuring 7500 mm in length with six pumps, a Battenfeld RP 250 SE / 2400 Caterpillar haul-off unit also from 2010 with a belt contact length of 2400 mm and belt width of 500 mm, a Battenfeld QTS 1000 P planetary saw from 2010, and a Battenfeld AS 1000 / 6m stacking table from 2006 with a table length of 6000 mm.
The extruder features multiple protective covers and panels along its body, with an electric motor mounted on top. Several hoses and cables are connected to the machine, and pneumatic or hydraulic cylinders are attached near the front section. The electrical control panels are open in some images, showing organized wiring, circuit breakers, relays, fuses, and labeled terminals. A pressure gauge and regulator are mounted on the side of the machine.
The machine shows signs of use, including some dirt and wear on the surfaces, and the floor around the machine has dust and debris. Red indicator lights are illuminated on a small control box attached to the extruder, and warning labels are present on the panels.
Please note that the main frequency converter requires repair. No information is provided regarding the operational status or testing of the equipment. Prospective buyers should consider this when evaluating the machine for purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
The main frequency converter needs to be repaired.
The line in the advertisement is only sold as a set.
Technical Specifications:
Profile Width (Max): 700 mm
Output Capacity: 600 kg/h
· EXTRUDER: Battenfeld BEX2-110-28V
Screw Diameter: 110 mm
Number Of Screws: 2
Screw Configuration: Parallel
Screw L/D Ratio: 28
Main Drive Power: 96 kW
· CALIBRATION TABLE: Battenfeld KP 404 V4 / 75
Year: 2010
Length: 7500 mm
Number Of Pumps: 6
· CATERPILLAR HAUL OFF: Battenfeld RP 250 SE / 2400
Year: 2010
Belt Contact: 2400 mm
Belt Width: 500 mm
· SAW: Battenfeld QTS 1000 P
Saw Type: Planetary Year: 2010
· STACKING TABLE: Battenfeld AS 1000 / 6m
Year: 2006
Table Length: 6000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this BATTENFELD BEX2-110-28V manufactured?
This BATTENFELD BEX2-110-28V Twin screw extruder was manufactured in 2007.
What needs repair in this equipment?
This equipment includes a main frequency converter that requires repair.
Is this BATTENFELD BEX2-110-28V sold as a complete set?
This BATTENFELD BEX2-110-28V Twin screw extruder is sold only as a complete set.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | Sept. 16, 2026 |
The main frequency converter needs to be repaired.
The line in the advertisement is only sold as a set.
Technical Specifications:
Profile Width (Max): 700 mm
Output Capacity: 600 kg/h
· EXTRUDER: Battenfeld BEX2-110-28V
Screw Diameter: 110 mm
Number Of Screws: 2
Screw Configuration: Parallel
Screw L/D Ratio: 28
Main Drive Power: 96 kW
· CALIBRATION TABLE: Battenfeld KP 404 V4 / 75
Year: 2010
Length: 7500 mm
Number Of Pumps: 6
· CATERPILLAR HAUL OFF: Battenfeld RP 250 SE / 2400
Year: 2010
Belt Contact: 2400 mm
Belt Width: 500 mm
· SAW: Battenfeld QTS 1000 P
Saw Type: Planetary Year: 2010
· STACKING TABLE: Battenfeld AS 1000 / 6m
Year: 2006
Table Length: 6000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this BATTENFELD BEX2-110-28V manufactured?
This BATTENFELD BEX2-110-28V Twin screw extruder was manufactured in 2007.
What needs repair in this equipment?
This equipment includes a main frequency converter that requires repair.
Is this BATTENFELD BEX2-110-28V sold as a complete set?
This BATTENFELD BEX2-110-28V Twin screw extruder is sold only as a complete set.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing features a Battenfeld twin screw extruder, model BEX2-110-28V, manufactured in 2007. The extruder has a screw diameter of 110 mm with two parallel screws and a screw length-to-diameter (L/D) ratio of 28. The main drive power is rated at 96 kW. It is designed to handle a maximum profile width of 700 mm and has an output capacity of approximately 600 kg/h.
The extruder is part of a complete line sold as a set, which includes several additional components for extrusion processing. These include a Battenfeld KP 404 V4 / 75 calibration table from 2010 measuring 7500 mm in length with six pumps, a Battenfeld RP 250 SE / 2400 Caterpillar haul-off unit also from 2010 with a belt contact length of 2400 mm and belt width of 500 mm, a Battenfeld QTS 1000 P planetary saw from 2010, and a Battenfeld AS 1000 / 6m stacking table from 2006 with a table length of 6000 mm.
The extruder features multiple protective covers and panels along its body, with an electric motor mounted on top. Several hoses and cables are connected to the machine, and pneumatic or hydraulic cylinders are attached near the front section. The electrical control panels are open in some images, showing organized wiring, circuit breakers, relays, fuses, and labeled terminals. A pressure gauge and regulator are mounted on the side of the machine.
The machine shows signs of use, including some dirt and wear on the surfaces, and the floor around the machine has dust and debris. Red indicator lights are illuminated on a small control box attached to the extruder, and warning labels are present on the panels.
Please note that the main frequency converter requires repair. No information is provided regarding the operational status or testing of the equipment. Prospective buyers should consider this when evaluating the machine for purchase.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2022 |
| Offers online | 1 |
| Last activity | Sept. 16, 2026 |
Двушнеков екструдер BATTENFELD BEX2-110-28V
Dvoušnekový extruder BATTENFELD BEX2-110-28V
BATTENFELD BEX2-110-28V Ekstruder med to skruer
BATTENFELD BEX2-110-28V Doppelschneckenextruder
Εξωθητήρας διπλού κοχλία BATTENFELD BEX2-110-28V
BATTENFELD BEX2-110-28V Twin screw extruder
Extrusora doble husillo BATTENFELD BEX2-110-28V
Extrudeuse bivis BATTENFELD BEX2-110-28V
Dvopužni ekstruder BATTENFELD BEX2-110-28V
BATTENFELD BEX2-110-28V Ikercsavaros extruder
Estrusore bivite BATTENFELD BEX2-110-28V
Dviejų sraigtų ekstruderis BATTENFELD BEX2-110-28V
BATTENFELD BEX2-110-28V Extruder met dubbele schroef
Wytłaczarka z podwójnym ślimakiem BATTENFELD BEX2-110-28V
Extrusora de dupla rosca BATTENFELD BEX2-110-28V
Extruder cu două șuruburi BATTENFELD BEX2-110-28V
BATTENFELD BEX2-110-28V Двухшнековый экструдер
Ekstruder sa dva puža BATTENFELD BEX2-110-28V
BATTENFELD BEX2-110-28V Dubbelskruvextruder
Çift vidalı ekstruder BATTENFELD BEX2-110-28V
EN
- Languages
English (GB)