Contact us to receive an offer.
| Manufacturer | Barriquand Steriflow / Brouillon Process |
|---|---|
| Model | 1331 EA |
| Year | 2018 |
| Location | France
|
This professional autoclave, manufactured by Barriquand Steriflow and upgraded by Brouillon Process, model 1331 EA, is designed for high-capacity thermal sterilization operations in canning factories. The equipment features a static horizontal configuration and operates using steam with superheated water, suitable for sterilizing a variety of products including those in glass jars, metal cans, heat-sealed bags or pouches, meat products, ready meals, vegetables, and sauces.
The autoclave has a large volume under pressure of 7,044 liters and operates at a calculation temperature of up to 150°C with a maximum operating pressure of 3 bar. It is intended for discontinuous cycles with high capacity per load, prioritizing robustness and process stability. Loading is performed via rolling carts, with the capacity to handle up to four trolleys simultaneously. Eight steel wire structure trolleys with removable shelves (dimensions: 80 × 120 × 100 cm) are supplied.
The control system is a Millenium 3 – Crouzet, revised during the 2018 retrofit, managing temperature increase, thermal maintenance, stage management, cooling phases, and critical parameters such as temperature and pressure.
The machine's overall dimensions are approximately 6.60 m in length, 2.70 m in width, and 2.45 m in height, with front loading by trolleys. It requires connections for steam supply, water supply, power supply, and compressed air.
Visually, the autoclave has a large cylindrical stainless steel body with a front-loading door and a control panel mounted on top, featuring buttons, switches, and a process diagram. The equipment appears clean and well-maintained externally, with no visible damage. Rails are installed on the floor in front of the autoclave to facilitate loading and unloading of carts. The rear side shows a complex piping system with gauges, valves, and a blue electric motor attached, along with a protective grid bearing a hot surface warning sign. Some floor residue is present near the base of the motor and pipes, as well as wear marks near the autoclave base.
This autoclave was previously used in a catering/meat cannery environment, indicating its suitability for demanding sterilization processes. It has undergone a complete retrofit in 2018, including capacity extension and control system upgrade, ensuring it meets modern operational standards.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Professional autoclave designed for thermal sterilization operations in canning factories, static horizontal configuration, steam/superheated water operation, with loading by rolling carts. High-capacity equipment (7044 liters), suitable for structured food production: artisanal or semi-industrial canneries, products in glass jars, metal cans, heat-sealed bags or pouches, meat products, ready meals, vegetables, sauces, etc.
• Original manufacturer: Barriquand Steriflow
• Year of manufacture: 1999 + complete retrofit: 2018 carried out by Brouillon Process with capacity extension to 7044 liters and control system upgrade
• Previous use: catering/meat cannery (demanding process)
//// Indicative production capacity:
• More than 3,000 4/4 format cans per cycle, depending on configuration and loading density.
//// General configuration:
• Type of equipment: static horizontal autoclave
• Thermal principle: steam with superheated water
• Volume under pressure: 7,044 liters
• Calculation temperature: 150°C
• Maximum operating pressure (stamp): 3 bar
• Main function: high-temperature sterilization/pasteurization
• Machine designed for discontinuous cycles, with high capacity per load, prioritizing robustness and process stability.
Loading method: by trolleys
• Capacity per cycle: up to 4 trolleys simultaneously
• 8 trolleys supplied: steel wire structure, removable shelves, dimensions: 80 × 120 × h 100 cm
//// Control system: Millenium 3 – Crouzet (revised during retrofit)
• Functions performed: temperature increase, thermal maintenance, stage management, cooling phases, control of critical parameters: temperature/pressure
//// Installation
• Overall dimensions (autoclave + peripherals): approximately 6.60 m × 2.70 m × height 2.45 m (front loading by trolleys)
• Connections and utilities required: steam supply, water supply, power supply, compressed air
The illustrations show the equipment in its installation location before it was dismantled and transported by us to our warehouses, where it can be viewed on request in its used and stored condition.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2006 |
| Offers online | 14 |
| Last activity | Nov. 3, 2026 |
Professional autoclave designed for thermal sterilization operations in canning factories, static horizontal configuration, steam/superheated water operation, with loading by rolling carts. High-capacity equipment (7044 liters), suitable for structured food production: artisanal or semi-industrial canneries, products in glass jars, metal cans, heat-sealed bags or pouches, meat products, ready meals, vegetables, sauces, etc.
• Original manufacturer: Barriquand Steriflow
• Year of manufacture: 1999 + complete retrofit: 2018 carried out by Brouillon Process with capacity extension to 7044 liters and control system upgrade
• Previous use: catering/meat cannery (demanding process)
//// Indicative production capacity:
• More than 3,000 4/4 format cans per cycle, depending on configuration and loading density.
//// General configuration:
• Type of equipment: static horizontal autoclave
• Thermal principle: steam with superheated water
• Volume under pressure: 7,044 liters
• Calculation temperature: 150°C
• Maximum operating pressure (stamp): 3 bar
• Main function: high-temperature sterilization/pasteurization
• Machine designed for discontinuous cycles, with high capacity per load, prioritizing robustness and process stability.
Loading method: by trolleys
• Capacity per cycle: up to 4 trolleys simultaneously
• 8 trolleys supplied: steel wire structure, removable shelves, dimensions: 80 × 120 × h 100 cm
//// Control system: Millenium 3 – Crouzet (revised during retrofit)
• Functions performed: temperature increase, thermal maintenance, stage management, cooling phases, control of critical parameters: temperature/pressure
//// Installation
• Overall dimensions (autoclave + peripherals): approximately 6.60 m × 2.70 m × height 2.45 m (front loading by trolleys)
• Connections and utilities required: steam supply, water supply, power supply, compressed air
The illustrations show the equipment in its installation location before it was dismantled and transported by us to our warehouses, where it can be viewed on request in its used and stored condition.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This professional autoclave, manufactured by Barriquand Steriflow and upgraded by Brouillon Process, model 1331 EA, is designed for high-capacity thermal sterilization operations in canning factories. The equipment features a static horizontal configuration and operates using steam with superheated water, suitable for sterilizing a variety of products including those in glass jars, metal cans, heat-sealed bags or pouches, meat products, ready meals, vegetables, and sauces.
The autoclave has a large volume under pressure of 7,044 liters and operates at a calculation temperature of up to 150°C with a maximum operating pressure of 3 bar. It is intended for discontinuous cycles with high capacity per load, prioritizing robustness and process stability. Loading is performed via rolling carts, with the capacity to handle up to four trolleys simultaneously. Eight steel wire structure trolleys with removable shelves (dimensions: 80 × 120 × 100 cm) are supplied.
The control system is a Millenium 3 – Crouzet, revised during the 2018 retrofit, managing temperature increase, thermal maintenance, stage management, cooling phases, and critical parameters such as temperature and pressure.
The machine's overall dimensions are approximately 6.60 m in length, 2.70 m in width, and 2.45 m in height, with front loading by trolleys. It requires connections for steam supply, water supply, power supply, and compressed air.
Visually, the autoclave has a large cylindrical stainless steel body with a front-loading door and a control panel mounted on top, featuring buttons, switches, and a process diagram. The equipment appears clean and well-maintained externally, with no visible damage. Rails are installed on the floor in front of the autoclave to facilitate loading and unloading of carts. The rear side shows a complex piping system with gauges, valves, and a blue electric motor attached, along with a protective grid bearing a hot surface warning sign. Some floor residue is present near the base of the motor and pipes, as well as wear marks near the autoclave base.
This autoclave was previously used in a catering/meat cannery environment, indicating its suitability for demanding sterilization processes. It has undergone a complete retrofit in 2018, including capacity extension and control system upgrade, ensuring it meets modern operational standards.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2006 |
| Offers online | 14 |
| Last activity | Nov. 3, 2026 |
Хоризонтален промишлен автоклав на пара – голям капацитет – зареждане с колички
Horizontální průmyslový parní autokláv – velká kapacita – nakládání pomocí vozíků
Horisontal industriel autoklave med damp – stor kapacitet – påfyldning med vogne
Horizontaler Industrie-Dampfautoklav – große Kapazität – Beladung mit Wagen
Οριζόντια βιομηχανική αυτόκλειστη ατμού – μεγάλης χωρητικότητας – φόρτωση με καρότσια
Horizontal industrial steam autoclave – large capacity – loading by trolleys
Autoclave industrial horizontal de vapor – gran capacidad – carga mediante carros
Autoclave industriel horizontal vapeur – grande capacité – chargement par chariots
Horizontalni industrijski parni autoklav – veliki kapacitet – utovar kolicima
Ipari vízszintes gőzsterilizáló – nagy kapacitású – kocsival való betöltés
Autoclave industriale orizzontale a vapore – grande capacità – caricamento tramite carrelli
Pramoninis horizontalus garinis autoklavas – didelės talpos – pakrovimas vežimėliais
Horizontale industriële stoomautoclaaf – grote capaciteit – belading met karren
Przemysłowy autoklaw poziomy parowy – duża pojemność – załadunek za pomocą wózków
Autoclave industrial horizontal a vapor – grande capacidade – carregamento por carrinhos
Autoclav industrial orizontal cu abur – capacitate mare – încărcare cu cărucioare
Горизонтальный промышленный паровой автоклав – большая вместимость – загрузка с помощью тележек
Horizontalni industrijski parni autoklav – velikog kapaciteta – utovar kolicima
Horisontell industriell ångautoklav – stor kapacitet – lastning med vagnar
Yatay endüstriyel buharlı otoklav – büyük kapasite – arabalarla yükleme
EN
- Languages
English (GB)