Contact us to receive an offer.
| Manufacturer | Axomatic |
|---|---|
| Model | Optima 800 |
| Year | 2003 |
| Location | Denmark
|
Manufacturer: Axomatic
Model: Optima 800
Year of manufacture: 2003
This automatic tube filler and welder is designed for filling plastic tubes with liquid, sticky, viscous, and pasty products. It features a stainless steel chassis with transparent protective panels, allowing visibility of the filling process while maintaining safety. The machine is equipped with a volumetric dispenser and an interchangeable volumetric piston dosing station with a stainless steel rotary valve, currently set up with a 40 ml piston. The piston size can be changed upon request.
The Optima 800 includes an automatic feeding system for tubes into the bucket, with a tube spot centering station using a photocell for precise positioning. It has a tray with 8 interchangeable buckets to accommodate different tube dimensions, supporting a maximum container diameter of 35 mm. Tubes are transferred to the packaging station via this tray.
Filling is performed through a stainless steel spout equipped with a drip cutter. The machine contains a single-envelope conical hopper with a 50-liter capacity for material input. Tube heating is done by a Leister heater, and welding is carried out using heated jaw clamps with water circulation for cooling. The closing station includes one pair of jaw clamps, with the possibility to insert characters. A tube top cutting station finishes the tubes after filling and sealing.
Waste is collected in a dedicated tank, and finished tubes are automatically evacuated into a chute. The machine is controlled via a programmable touch screen with an Omron PLC, and it has a variable-speed motorized drive. Safety features include protective casings with door safety devices. The machine has a total electrical power of 5.5 kW (380V) and requires compressed air at 6 bars and water consumption of approximately 4 liters per hour.
The exterior and components appear clean and well-maintained, with no visible damage. The control panel is located on the front right side, featuring buttons and a display screen. Stack lights in red, yellow, and green indicate the machine's status. The machine weighs approximately 700 kg and measures 2.20 m (L) x 1.10 m (W) x 2.10 m (H).
Maximum output is approximately 50 tubes per minute or about 3000 tubes per hour. This machine is suitable for industries requiring precise and efficient tube filling and sealing of plastic tubes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacture: AXOMATIC
Model: OPTIMA 800
Year : 2003
Weight : 700 kg
Dimensions :
(L x W x H) 2.20 x 1.10 x 2.10 M
Product description
Automatic tube filler-welder with volumetric dispenser for liquid, sticky, viscous and pasty products.
Equipped with :
Automatic feeding of tubes into bucket.
Tube spot centering station by photocell.
Tray with 8 interchangeable buckets, depending on tube dimensions, for transferring tubes to the packaging station.
Bucket size available with the machine: 35 mm diameter.
Interchangeable volumetric piston dosing station with stainless steel rotary valve.
Currently equipped with 1 x 40ml piston.
The piston can be changed on request from the supplier.
Tube filling station with stainless steel spout and drip cutter.
Single-envelope conical hopper with 50-liter capacity.
Tube heating station with Leister heater.
Welding station using heated jaw clamps with water circulation.
Closing station with 1 pair of jaw clamps, with possibility of inserting characters.
Water circulation for jaw cooling.
Currently without cooling unit, but one can be supplied.
Tube top cutting station for finishing.
Waste collection tank.
Automatic evacuation of finished tubes into a chute.
Programmable touch screen with Omron PLC.
Variable-speed motorized drive.
Protective casings with door safety devices.
Stainless steel chassis.
Maximum output: approx. 50 tubes/minute / approx 3000 tubes/h.
Total electrical power: 5.5 kw, 380V
Air consumption: 6 Bars.
Water consumption: 4 litres/hour.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2013 |
| Offers online | 53 |
| Last activity | Nov. 3, 2026 |
Manufacture: AXOMATIC
Model: OPTIMA 800
Year : 2003
Weight : 700 kg
Dimensions :
(L x W x H) 2.20 x 1.10 x 2.10 M
Product description
Automatic tube filler-welder with volumetric dispenser for liquid, sticky, viscous and pasty products.
Equipped with :
Automatic feeding of tubes into bucket.
Tube spot centering station by photocell.
Tray with 8 interchangeable buckets, depending on tube dimensions, for transferring tubes to the packaging station.
Bucket size available with the machine: 35 mm diameter.
Interchangeable volumetric piston dosing station with stainless steel rotary valve.
Currently equipped with 1 x 40ml piston.
The piston can be changed on request from the supplier.
Tube filling station with stainless steel spout and drip cutter.
Single-envelope conical hopper with 50-liter capacity.
Tube heating station with Leister heater.
Welding station using heated jaw clamps with water circulation.
Closing station with 1 pair of jaw clamps, with possibility of inserting characters.
Water circulation for jaw cooling.
Currently without cooling unit, but one can be supplied.
Tube top cutting station for finishing.
Waste collection tank.
Automatic evacuation of finished tubes into a chute.
Programmable touch screen with Omron PLC.
Variable-speed motorized drive.
Protective casings with door safety devices.
Stainless steel chassis.
Maximum output: approx. 50 tubes/minute / approx 3000 tubes/h.
Total electrical power: 5.5 kw, 380V
Air consumption: 6 Bars.
Water consumption: 4 litres/hour.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Manufacturer: Axomatic
Model: Optima 800
Year of manufacture: 2003
This automatic tube filler and welder is designed for filling plastic tubes with liquid, sticky, viscous, and pasty products. It features a stainless steel chassis with transparent protective panels, allowing visibility of the filling process while maintaining safety. The machine is equipped with a volumetric dispenser and an interchangeable volumetric piston dosing station with a stainless steel rotary valve, currently set up with a 40 ml piston. The piston size can be changed upon request.
The Optima 800 includes an automatic feeding system for tubes into the bucket, with a tube spot centering station using a photocell for precise positioning. It has a tray with 8 interchangeable buckets to accommodate different tube dimensions, supporting a maximum container diameter of 35 mm. Tubes are transferred to the packaging station via this tray.
Filling is performed through a stainless steel spout equipped with a drip cutter. The machine contains a single-envelope conical hopper with a 50-liter capacity for material input. Tube heating is done by a Leister heater, and welding is carried out using heated jaw clamps with water circulation for cooling. The closing station includes one pair of jaw clamps, with the possibility to insert characters. A tube top cutting station finishes the tubes after filling and sealing.
Waste is collected in a dedicated tank, and finished tubes are automatically evacuated into a chute. The machine is controlled via a programmable touch screen with an Omron PLC, and it has a variable-speed motorized drive. Safety features include protective casings with door safety devices. The machine has a total electrical power of 5.5 kW (380V) and requires compressed air at 6 bars and water consumption of approximately 4 liters per hour.
The exterior and components appear clean and well-maintained, with no visible damage. The control panel is located on the front right side, featuring buttons and a display screen. Stack lights in red, yellow, and green indicate the machine's status. The machine weighs approximately 700 kg and measures 2.20 m (L) x 1.10 m (W) x 2.10 m (H).
Maximum output is approximately 50 tubes per minute or about 3000 tubes per hour. This machine is suitable for industries requiring precise and efficient tube filling and sealing of plastic tubes.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2013 |
| Offers online | 53 |
| Last activity | Nov. 3, 2026 |
Пълначна машина за туби Axomatic Optima 800
Plnicí stroj na tuby Axomatic Optima 800
Axomatic Optima 800 Tubefyldemaskine
Axomatic Optima 800 Tubenfüllmaschine
Γεμιστική μηχανή σωληναρίων Axomatic Optima 800
Axomatic Optima 800 Tube filling machine
Llenadora de tubos Axomatic Optima 800
Remplisseuse de tubes Axomatic Optima 800
Punilica za tube Axomatic Optima 800
Axomatic Optima 800 Tubustöltő gép
Riempitrice per tubetti Axomatic Optima 800
Axomatic Optima 800 Tūbelių pildymo mašina
Axomatic Optima 800 Tubenvulmachine
Nalewarki do tub Axomatic Optima 800
Enchedora de tubos Axomatic Optima 800
Mașină de umplere a tuburilor Axomatic Optima 800
Axomatic Optima 800 Тубонаполнитель
Punilica za tube Axomatic Optima 800
Axomatic Optima 800 Tubfyllningsmaskin
Tüp dolum makinesi Axomatic Optima 800
EN
- Languages
English (GB)