Contact us to receive an offer.
| Manufacturer | AVEREX |
|---|---|
| Model | HS-450i |
| Year | 2011 |
| Location | Switzerland
|
AVEREX HS-450i 4-Axis Machining Center
This listing is for an AVEREX HS-450i machining center, identified as a 4-axis machining center. It is equipped with a FANUC Series 31i-MODEL A control, and the stated year is 2011. The specifications below are reproduced from the available product information.
Axis travels:
- X-axis (longitudinal): 640 mm
- Y-axis (transversal): 610 mm
- Z-axis (vertical): 680 mm
The listed workpiece dimensions are a maximum height of 1000 mm and a diameter of 785 mm. The table divisions for the C axis are specified as 0.001°.
Pallet changing device:
The product information includes a pallet changing device heading and gives a maximum workpiece weight of 550 kg. No further details about the device are provided.
Rapid traverse rates are listed as 60 m/min for each of the three stated axes: longitudinal (X), transversal (Y), and vertical (Z).
The machine weight is stated as approximately 11,645 kg. The overall dimensions are listed as 4730 mm in length, 2260 mm in width, and 2600 mm in height.
In summary, the supplied specifications identify the machine type, manufacturer, control, year, axis travels, workpiece dimensions, C-axis table divisions, maximum workpiece weight, rapid traverse rates, approximate machine weight, and overall dimensions. No additional accessories, condition details, or operating status are specified in the available information.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Type: HS-450i
Manufacturer: AVEREX
Group: Machining center
Subgroup: 4-axis machining center
Control: FANUC Series 31i-MODEL A
Year: 2011
Longitudinal travel (X-axis) 640 mm
Transversal travel (Y-axis) 610 mm
Vertical travel (Z-axis) 680 mm
Dimension of the workpiece:
Height 1000 mm
Diameter 785 mm
Table divisions (C) 0.001 °
Pallet changing device:
Maximum workpiece weight 550 kg
Rapid traverse: longitudinal 60 m/min
Rapid traverse: transversal 60 m/min
Rapid traverse: vertical 60 m/min
Machine's weight about 11,645 kg
Overall dimensions of machine:
Length 4730 mm
Width 2260 mm
Height 2600 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 260 |
| Last activity | Oct. 30, 2026 |
Type: HS-450i
Manufacturer: AVEREX
Group: Machining center
Subgroup: 4-axis machining center
Control: FANUC Series 31i-MODEL A
Year: 2011
Longitudinal travel (X-axis) 640 mm
Transversal travel (Y-axis) 610 mm
Vertical travel (Z-axis) 680 mm
Dimension of the workpiece:
Height 1000 mm
Diameter 785 mm
Table divisions (C) 0.001 °
Pallet changing device:
Maximum workpiece weight 550 kg
Rapid traverse: longitudinal 60 m/min
Rapid traverse: transversal 60 m/min
Rapid traverse: vertical 60 m/min
Machine's weight about 11,645 kg
Overall dimensions of machine:
Length 4730 mm
Width 2260 mm
Height 2600 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
AVEREX HS-450i 4-Axis Machining Center
This listing is for an AVEREX HS-450i machining center, identified as a 4-axis machining center. It is equipped with a FANUC Series 31i-MODEL A control, and the stated year is 2011. The specifications below are reproduced from the available product information.
Axis travels:
- X-axis (longitudinal): 640 mm
- Y-axis (transversal): 610 mm
- Z-axis (vertical): 680 mm
The listed workpiece dimensions are a maximum height of 1000 mm and a diameter of 785 mm. The table divisions for the C axis are specified as 0.001°.
Pallet changing device:
The product information includes a pallet changing device heading and gives a maximum workpiece weight of 550 kg. No further details about the device are provided.
Rapid traverse rates are listed as 60 m/min for each of the three stated axes: longitudinal (X), transversal (Y), and vertical (Z).
The machine weight is stated as approximately 11,645 kg. The overall dimensions are listed as 4730 mm in length, 2260 mm in width, and 2600 mm in height.
In summary, the supplied specifications identify the machine type, manufacturer, control, year, axis travels, workpiece dimensions, C-axis table divisions, maximum workpiece weight, rapid traverse rates, approximate machine weight, and overall dimensions. No additional accessories, condition details, or operating status are specified in the available information.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 260 |
| Last activity | Oct. 30, 2026 |
Машинен инструмент AVEREX HS-450i
Obráběcí stroj AVEREX HS-450i
AVEREX HS-450i Værktøjsmaskiner
AVEREX HS-450i Werkzeugmaschine
Εργαλειομηχανή AVEREX HS-450i
AVEREX HS-450i Machine-tool
Máquina-herramienta AVEREX HS-450i
Machine-outil AVEREX HS-450i
Strojni alat AVEREX HS-450i
AVEREX HS-450i Szerszámgép
Macchina utensile AVEREX HS-450i
AVEREX HS-450i Staklės
AVEREX HS-450i Werktuigmachine
Obrabiarka AVEREX HS-450i
Máquina-ferramenta AVEREX HS-450i
Mașini-unelte AVEREX HS-450i
AVEREX HS-450i Станок
Mašinski alat AVEREX HS-450i
AVEREX HS-450i Verktygsmaskin
Makine aleti AVEREX HS-450i
EN
- Languages
English (GB)