Contact us to receive an offer.
| Manufacturer | Automa |
|---|---|
| Model | APEX AT500D |
| Year | 2009 |
| Location | Spain
|
Listing overview: Offer of blow molding machines from Automa and Eisa. Featured machine: Automa APEX AT500D (manufactured 2009). This unit is an extrusion blow molding machine equipped with a single-screw extruder. The extruder screw diameter is 90 mm. Net mass/weight is listed at 13,000 kg.
Condition and status: Technical condition is described as "Good." The machine status is listed as visible but disconnected, indicating the unit is present on site but not currently connected to utilities or production lines.
Key points for buyers:
- Manufacturer and model: Automa APEX AT500D (2009). The offer also references Eisa as an available brand of blow molding equipment.
- Machine type: Extrusion blow molding with a single-screw configuration; screw diameter 90 mm is specified.
- Weight: 13,000 kg, useful for planning transport and lifting requirements.
- Condition: Reported as "Good;" the unit is visible but disconnected. There is no statement here about testing, operational status under power, refurbishment, or warranty.
What is not included: No additional specifications (motor power, cycle rate, parison control, clamping force, extruder L/D ratio, or tooling details) are provided in this listing. No accessories, auxiliary equipment, tooling, or spare parts are listed or photographed in the provided information.
Recommendation: Prospective buyers should plan an in-person inspection or request further documented information (operation reports, test runs, tooling list, electrical requirements) prior to purchase to confirm suitability for their application. All details above are provided as listed in the current description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Offer: Blow Molding Machines: Automa and Eisa
Manufacturer: Automa
Model: APEX AT500D
Year of manufacture: 2009
Technical condition: Good
Machine status: Visible but disconnected
Machine type: Extrusion blow molding
Weight: 13,000 kg
Screw diameter: 90 mm
Screw type: Single-screw
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 23, 2026 |
Offer: Blow Molding Machines: Automa and Eisa
Manufacturer: Automa
Model: APEX AT500D
Year of manufacture: 2009
Technical condition: Good
Machine status: Visible but disconnected
Machine type: Extrusion blow molding
Weight: 13,000 kg
Screw diameter: 90 mm
Screw type: Single-screw
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Listing overview: Offer of blow molding machines from Automa and Eisa. Featured machine: Automa APEX AT500D (manufactured 2009). This unit is an extrusion blow molding machine equipped with a single-screw extruder. The extruder screw diameter is 90 mm. Net mass/weight is listed at 13,000 kg.
Condition and status: Technical condition is described as "Good." The machine status is listed as visible but disconnected, indicating the unit is present on site but not currently connected to utilities or production lines.
Key points for buyers:
- Manufacturer and model: Automa APEX AT500D (2009). The offer also references Eisa as an available brand of blow molding equipment.
- Machine type: Extrusion blow molding with a single-screw configuration; screw diameter 90 mm is specified.
- Weight: 13,000 kg, useful for planning transport and lifting requirements.
- Condition: Reported as "Good;" the unit is visible but disconnected. There is no statement here about testing, operational status under power, refurbishment, or warranty.
What is not included: No additional specifications (motor power, cycle rate, parison control, clamping force, extruder L/D ratio, or tooling details) are provided in this listing. No accessories, auxiliary equipment, tooling, or spare parts are listed or photographed in the provided information.
Recommendation: Prospective buyers should plan an in-person inspection or request further documented information (operation reports, test runs, tooling list, electrical requirements) prior to purchase to confirm suitability for their application. All details above are provided as listed in the current description.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | Sept. 23, 2026 |
Екструдираща линия Automa APEX AT500D
Vytlačovací linka Automa APEX AT500D
Automa APEX AT500D Ekstruderingslinje
Automa APEX AT500D Extrusionsanlage
Γραμμή εξώθησης Automa APEX AT500D
Automa APEX AT500D Extrusion line
Maquinas extrusión soplado: Automa y Eisa
Ligne d'extrusion Automa APEX AT500D
Linija za ekstruziju Automa APEX AT500D
Automa APEX AT500D Extrudáló sor
Linea di estrusione Automa APEX AT500D
Automa APEX AT500D Ekstruzijos linija
Automa APEX AT500D Extrusie lijn
Linia do wytłaczania Automa APEX AT500D
Linha de extrusão Automa APEX AT500D
Linie de extrudare Automa APEX AT500D
Automa APEX AT500D Экструзионная линия
Linija za ekstruziju Automa APEX AT500D
Automa APEX AT500D Extruderingslinje
Ekstrüzyon hattı Automa APEX AT500D
EN
- Languages
English (GB)