AUERTECH Blockhausfräse TWIN Wood milling machine

45,000 € Price is negotiable

Make an offer
  • - Secured payment for the purchase
  • - Dedicated compliance check of the seller
  • - Logistics and customs support if applicable
  • - After-sale follow up if needed

Contact us to receive an offer.

Manufacturer AUERTECH
Model Blockhausfräse TWIN
Year 2017
Location Poland PL
Ilya
Your dedicated contact
Ilya Z.

Automatic description (AI-Generated)

AUERTECH Blockhausfräse TWIN — two-station log milling machine (Austria), year 2017. Designed for serial production of garden house and gazebo elements, this machine mills the CHALET corner joint on both log ends simultaneously while calibrating element length in the same pass. The second station runs on a shared rail so spacing can be set for a given log length; the machine can be operated in single or twin mode.

Key data
- Manufacturer / model: AUERTECH Blockhausfräse TWIN
- Year of manufacture: 2017
- Weight: 2,500 kg
- Configuration: two stations
- Max. working range: 6,170 mm
- Workpiece cross-section range: 28 × 120 – 70 × 160 mm
- Double-end machining length: 1.0 – 6.17 m
- Single-end machining length: from 0.30 m
- Connected load: 25.0 kW
- Power supply: 400 V + PE
- Compressed air requirement: 8 bar, 300 l/min

Standard equipment and functions
- Pneumatic ejector
- Pneumatic workpiece clamps
- Positioning pusher for the log
- SINGLE / TWIN operating modes
- Control cabinet with PLC and frequency inverter
- Siemens SIMATIC operator panel
- Rail-guided station travel system
- Interlocked guards with emergency stop switches

Tooling included at no additional cost
- 2 × cutter heads with replaceable knives Ø220 / 216 × 22.3 × 30 mm (max 7,000 rpm)
- 2 × cutter heads with replaceable knives Ø250 / 246 × 22.7 × 30 mm (max 6,000 rpm)
- Full set of spacer shims (for cutter spacing adjustment)
- AKE saw blade Ø250 × 3.20/2.20 × 30, Z60 HW: 1 pc
- OERTLI saw blade Ø220 × 2.8/1.8 × 30, Z48: 1 pc
- Saw blade mounted in the machine: 1 pc
- Adjustable cutter sets installed in the machine: 8 pcs

The price includes the tooling listed above and the tools mounted in the machine. No additional condition statements (tested/working/refurbished/warranty) are provided here.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

AUERTECH Blockhausfräse TWIN two-station log milling machine of Austrian manufacture, year 2017, designed for serial production of garden house and gazebo components. The CHALET corner joint is milled on both log ends simultaneously, with element length calibrated in the same pass. The second station travels on a shared rail, allowing the spacing to be set for a given log length and operation in single or twin mode.

Make and model: AUERTECH (Austria), Blockhausfräse TWIN
Year of manufacture: 2017
Connected load: 25.0 kW
Power supply: 400 V + PE
Compressed air: 8 bar, 300 l/min
Weight: 2,500 kg
Configuration: two stations
Max. working range: 6,170 mm
Operating mode: single / twin
Corner joint: CHALET
Workpiece cross-section: 28×120 – 70×160 mm
Length, double-end machining: 1.0 – 6.17 m
Length, single-end machining: from 0.30 m

EQUIPMENT AND FUNCTIONS

Pneumatic ejector
Pneumatic workpiece clamps
Positioning pusher for the log
SINGLE / TWIN operating modes
Control cabinet with PLC and frequency inverter
Siemens SIMATIC operator panel
Rail-guided station travel system
Interlocked guards with emergency stop switches

TOOLING INCLUDED AT NO ADDITIONAL COST

Cutter heads with replaceable knives Ø220 / 216 × 22.3 × 30 mm, max 7,000 rpm: 2 pcs
Cutter heads with replaceable knives Ø250 / 246 × 22.7 × 30 mm, max 6,000 rpm: 2 pcs
Spacer shims: full set
AKE saw blade Ø250 × 3.20/2.20 × 30, Z60 HW: 1 pc
OERTLI saw blade Ø220 × 2.8/1.8 × 30, Z48: 1 pc
Saw blade mounted in the machine: 1 pc
Adjustable cutter sets in the machine: 8 pcs

Cutter spacing is adjusted with spacer shims. The price includes all tooling shown in the photographs, including tools mounted in the machine.

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.


Client type Factory – small or medium company
Active since 2026
Offers online 5
Last activity Nov. 17, 2026

Seller's description

AUERTECH Blockhausfräse TWIN two-station log milling machine of Austrian manufacture, year 2017, designed for serial production of garden house and gazebo components. The CHALET corner joint is milled on both log ends simultaneously, with element length calibrated in the same pass. The second station travels on a shared rail, allowing the spacing to be set for a given log length and operation in single or twin mode.

Make and model: AUERTECH (Austria), Blockhausfräse TWIN
Year of manufacture: 2017
Connected load: 25.0 kW
Power supply: 400 V + PE
Compressed air: 8 bar, 300 l/min
Weight: 2,500 kg
Configuration: two stations
Max. working range: 6,170 mm
Operating mode: single / twin
Corner joint: CHALET
Workpiece cross-section: 28×120 – 70×160 mm
Length, double-end machining: 1.0 – 6.17 m
Length, single-end machining: from 0.30 m

EQUIPMENT AND FUNCTIONS

Pneumatic ejector
Pneumatic workpiece clamps
Positioning pusher for the log
SINGLE / TWIN operating modes
Control cabinet with PLC and frequency inverter
Siemens SIMATIC operator panel
Rail-guided station travel system
Interlocked guards with emergency stop switches

TOOLING INCLUDED AT NO ADDITIONAL COST

Cutter heads with replaceable knives Ø220 / 216 × 22.3 × 30 mm, max 7,000 rpm: 2 pcs
Cutter heads with replaceable knives Ø250 / 246 × 22.7 × 30 mm, max 6,000 rpm: 2 pcs
Spacer shims: full set
AKE saw blade Ø250 × 3.20/2.20 × 30, Z60 HW: 1 pc
OERTLI saw blade Ø220 × 2.8/1.8 × 30, Z48: 1 pc
Saw blade mounted in the machine: 1 pc
Adjustable cutter sets in the machine: 8 pcs

Cutter spacing is adjusted with spacer shims. The price includes all tooling shown in the photographs, including tools mounted in the machine.

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.



Automatic description (AI-Generated)

AUERTECH Blockhausfräse TWIN — two-station log milling machine (Austria), year 2017. Designed for serial production of garden house and gazebo elements, this machine mills the CHALET corner joint on both log ends simultaneously while calibrating element length in the same pass. The second station runs on a shared rail so spacing can be set for a given log length; the machine can be operated in single or twin mode.

Key data
- Manufacturer / model: AUERTECH Blockhausfräse TWIN
- Year of manufacture: 2017
- Weight: 2,500 kg
- Configuration: two stations
- Max. working range: 6,170 mm
- Workpiece cross-section range: 28 × 120 – 70 × 160 mm
- Double-end machining length: 1.0 – 6.17 m
- Single-end machining length: from 0.30 m
- Connected load: 25.0 kW
- Power supply: 400 V + PE
- Compressed air requirement: 8 bar, 300 l/min

Standard equipment and functions
- Pneumatic ejector
- Pneumatic workpiece clamps
- Positioning pusher for the log
- SINGLE / TWIN operating modes
- Control cabinet with PLC and frequency inverter
- Siemens SIMATIC operator panel
- Rail-guided station travel system
- Interlocked guards with emergency stop switches

Tooling included at no additional cost
- 2 × cutter heads with replaceable knives Ø220 / 216 × 22.3 × 30 mm (max 7,000 rpm)
- 2 × cutter heads with replaceable knives Ø250 / 246 × 22.7 × 30 mm (max 6,000 rpm)
- Full set of spacer shims (for cutter spacing adjustment)
- AKE saw blade Ø250 × 3.20/2.20 × 30, Z60 HW: 1 pc
- OERTLI saw blade Ø220 × 2.8/1.8 × 30, Z48: 1 pc
- Saw blade mounted in the machine: 1 pc
- Adjustable cutter sets installed in the machine: 8 pcs

The price includes the tooling listed above and the tools mounted in the machine. No additional condition statements (tested/working/refurbished/warranty) are provided here.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Factory – small or medium company
Active since 2026
Offers online 5
Last activity Nov. 17, 2026

Here is a selection of similar machines - AUERTECH Blockhausfräse TWIN


Used Woodworking Machines in Poland for Sale

Browse used woodworking machines located in Poland on Exapro: Homag, Biesse and SCM panel processing lines, edgebanders, CNC routers including Kimla machines, Weinig moulders and sanders from Polish furniture manufacturers. Filter by machine type and specification.

AUERTECH Blockhausfräse TWIN Wood milling machine