Contact us to receive an offer.
| Manufacturer | ATMSOLUTIONS |
|---|---|
| Model | ATMS 550X1000 SIEMENS |
| Year | 2021 |
| Location | Poland
|
CNC lathe equipped with servo drives and servo drivers from Siemens, ensuring precise control of axis movement. The encoders are also from Siemens, guaranteeing accurate position measurement. The X and Z axis motors each have a power of 1.75 kW, enabling efficient machine operation. HIWIN linear guides and NSK bearings provide stability and long-lasting use. The HIWIN ball screw is responsible for precise axis movement. The machine bed is slanted, facilitating the removal of chips and coolant. The maximum passage over the bed is 550 mm, and over the carriage 280 mm, allowing the machining of parts with a diameter of up to 250 mm and a length of up to 1000 mm. The spindle bore is 74 mm, and the spindle motor has a power of 7.5 kW and reaches speeds of up to 3000 rpm. The tailstock quill end is made to MT5 standard. The machine is equipped with an automatic lubrication system, which increases the reliability and durability of components. The X and Z axis speeds reach up to 15 m/min, with movement ranges of 200 mm for the X axis and 1000 mm for the Z axis. The tool turret has 12 tool positions with a diameter of 330 mm and a hydraulic turret locking system. Hydraulic jaws provide secure clamping of machined parts. The extendable coolant tank on wheels facilitates operation and maintenance. Sliding front doors and a tilting operator panel increase work comfort. The machine is equipped with oil pressure gauges accessible from the operator's position, a foot pedal, oil pump power of 1.5 kW, and an oil cooler. The manual feed offers three feed speed settings, and the working area is illuminated. Additionally, a warning and signalling lamp is installed. The automatic bar feeder supports bars with a diameter up to 65 mm and length of 1250 mm (optionally 1550 mm), with a magazine holding up to 10 pieces of 65 mm diameter bars. The feeder dimensions are approximately 1670x800 mm. The description does not include information about the technical condition or additional accessories not listed.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Construction:
Servo drives and servo drivers : Siemens
Encoders : Siemens
Motor powers: X/Z : 1.75/1.75 kW
Guides: HIWIN
Bearings : NSK
Ball screw : HIWIN
Bed : slanted
Clearance over the bed : diameter 550 mm
Clearance over the slide: diameter 280 mm
Maximum machining length: 1000 mm
Chuck diameter: 250 mm
Spindle clearance: 74 mm
Spindle motor: 7.5kW
Spindle speed: 3000 rpm
Tailstock pin end: MT5
Automatic lubrication system
Axis speed : X - 15 m/min; Z- 15 m/min
Axis travel range : X - 200mm/ Z - 1000mm
Tool head : Number of tool positions : 12/ Tool head diameter: 330mm
Hydraulic tool head locking system
Hydraulic jaws
Pull-out coolant tank on wheels
Sliding front door
Oil pressure gauges accessible from the operator's position
Foot pedal
Oil pump motor power: 1.5kW
Oil cooler
Tiltable operator panel
Hand-held speed controller with three feed rate settings
Work area illumination
Warning and signaling lamp
Automatic bar feeder:
maximum diameter of the bar in the feeder : bar diameter up to-65 mm
bar length 1250 mm (optional 1550 mm)
bar storage capacity: fi 65 x 10 pieces
dimensions: about 1670x800 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What control system is used in this ATMSOLUTIONS ATMS 550X1000 CNC lathe?
This ATMSOLUTIONS ATMS 550X1000 CNC lathe is equipped with a Siemens control system.
Is this equipment currently operational?
This equipment is operational and can be seen in production.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2025 |
| Offers online | 7 |
| Last activity | Oct. 30, 2026 |
Construction:
Servo drives and servo drivers : Siemens
Encoders : Siemens
Motor powers: X/Z : 1.75/1.75 kW
Guides: HIWIN
Bearings : NSK
Ball screw : HIWIN
Bed : slanted
Clearance over the bed : diameter 550 mm
Clearance over the slide: diameter 280 mm
Maximum machining length: 1000 mm
Chuck diameter: 250 mm
Spindle clearance: 74 mm
Spindle motor: 7.5kW
Spindle speed: 3000 rpm
Tailstock pin end: MT5
Automatic lubrication system
Axis speed : X - 15 m/min; Z- 15 m/min
Axis travel range : X - 200mm/ Z - 1000mm
Tool head : Number of tool positions : 12/ Tool head diameter: 330mm
Hydraulic tool head locking system
Hydraulic jaws
Pull-out coolant tank on wheels
Sliding front door
Oil pressure gauges accessible from the operator's position
Foot pedal
Oil pump motor power: 1.5kW
Oil cooler
Tiltable operator panel
Hand-held speed controller with three feed rate settings
Work area illumination
Warning and signaling lamp
Automatic bar feeder:
maximum diameter of the bar in the feeder : bar diameter up to-65 mm
bar length 1250 mm (optional 1550 mm)
bar storage capacity: fi 65 x 10 pieces
dimensions: about 1670x800 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
What control system is used in this ATMSOLUTIONS ATMS 550X1000 CNC lathe?
This ATMSOLUTIONS ATMS 550X1000 CNC lathe is equipped with a Siemens control system.
Is this equipment currently operational?
This equipment is operational and can be seen in production.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
CNC lathe equipped with servo drives and servo drivers from Siemens, ensuring precise control of axis movement. The encoders are also from Siemens, guaranteeing accurate position measurement. The X and Z axis motors each have a power of 1.75 kW, enabling efficient machine operation. HIWIN linear guides and NSK bearings provide stability and long-lasting use. The HIWIN ball screw is responsible for precise axis movement. The machine bed is slanted, facilitating the removal of chips and coolant. The maximum passage over the bed is 550 mm, and over the carriage 280 mm, allowing the machining of parts with a diameter of up to 250 mm and a length of up to 1000 mm. The spindle bore is 74 mm, and the spindle motor has a power of 7.5 kW and reaches speeds of up to 3000 rpm. The tailstock quill end is made to MT5 standard. The machine is equipped with an automatic lubrication system, which increases the reliability and durability of components. The X and Z axis speeds reach up to 15 m/min, with movement ranges of 200 mm for the X axis and 1000 mm for the Z axis. The tool turret has 12 tool positions with a diameter of 330 mm and a hydraulic turret locking system. Hydraulic jaws provide secure clamping of machined parts. The extendable coolant tank on wheels facilitates operation and maintenance. Sliding front doors and a tilting operator panel increase work comfort. The machine is equipped with oil pressure gauges accessible from the operator's position, a foot pedal, oil pump power of 1.5 kW, and an oil cooler. The manual feed offers three feed speed settings, and the working area is illuminated. Additionally, a warning and signalling lamp is installed. The automatic bar feeder supports bars with a diameter up to 65 mm and length of 1250 mm (optionally 1550 mm), with a magazine holding up to 10 pieces of 65 mm diameter bars. The feeder dimensions are approximately 1670x800 mm. The description does not include information about the technical condition or additional accessories not listed.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery manufacturer |
| Active since | 2025 |
| Offers online | 7 |
| Last activity | Oct. 30, 2026 |
cnc струг ATMSOLUTIONS ATMS 550X1000 SIEMENS
Soustruh cnc ATMSOLUTIONS ATMS 550X1000 SIEMENS
ATMSOLUTIONS ATMS 550X1000 SIEMENS cnc drejebænk
ATMSOLUTIONS ATMS 550X1000 SIEMENS Drehmaschine CNC
cnc τόρνος ATMSOLUTIONS ATMS 550X1000 SIEMENS
ATMSOLUTIONS ATMS 550X1000 SIEMENS cnc lathe
Torno cnc ATMSOLUTIONS ATMS 550X1000 SIEMENS
Tour cnc ATMSOLUTIONS ATMS 550X1000 SIEMENS
cnc tokarski stroj ATMSOLUTIONS ATMS 550X1000 SIEMENS
ATMSOLUTIONS ATMS 550X1000 SIEMENS cnc eszterga
Tornio cnc ATMSOLUTIONS ATMS 550X1000 SIEMENS
cnc tekinimo staklės ATMSOLUTIONS ATMS 550X1000 SIEMENS
ATMSOLUTIONS ATMS 550X1000 SIEMENS cnc-draaibank
Tokarka CNC ATMSOLUTIONS ATMS 550X1000 SIEMENS
Torno CNC ATMSOLUTIONS ATMS 550X1000 SIEMENS
strung cnc ATMSOLUTIONS ATMS 550X1000 SIEMENS
ATMSOLUTIONS ATMS 550X1000 SIEMENS Токарный станок с ЧПУ
cnc strug ATMSOLUTIONS ATMS 550X1000 SIEMENS
ATMSOLUTIONS ATMS 550X1000 SIEMENS cnc svarv
Cnc torna ATMSOLUTIONS ATMS 550X1000 SIEMENS
EN
- Languages
English (GB)