| Manufacturer | Atlantic |
|---|---|
| Model | ATS 3012 |
| Year | 1990 |
| Location | Germany
|
This listing features an Atlantic ATS 3012 hydraulic guillotine shear manufactured in 1990. The machine is designed for cutting sheet metal with a maximum cutting length of 3050 mm and a maximum sheet thickness capacity of 12 mm. It offers a cutting angle adjustment range from 0.5° to 3°, allowing for precise angle control during cutting operations. The back gauge is electrically adjustable up to 1000 mm, enhancing positioning accuracy for repetitive cuts.
The machine measures approximately 3960 mm in length, 2100 mm in width, and 2220 mm in height, with a total weight of about 8000 kg. It operates with a total power requirement of 22.5 kW and has an oil capacity of 350 liters. The machine features 18 hold-down devices to secure the material during cutting, contributing to stable and accurate shearing.
The hydraulic shear is equipped with an electric back gauge and comes with a spare blade. The control panel is located on the upper left side of the machine and includes various buttons and rotary knobs, including a green start button marked "START" and an emergency stop switch mounted on the front lower left side for safety. The blade area is protected by a yellow safety guard with an orange protective grille, ensuring operator safety during use.
The machine shows visible signs of use, including scratches and wear on the exterior paint surface and some paint chipping on the control panel. The rear side exposes mechanical components such as the motor and hydraulic system, with some dirt accumulation and wear visible on the back panel and base. Metal support bars are present on the work surface to hold material during cutting. Overall, the machine appears structurally intact without visible major damage, suitable for industrial workshop environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Guillotine shears - hydraulic
Make Atlantic
Type ATS 3012
Year of construction 1990
Sheet width 3050 mm
Sheet thickness 12 mm
Distance between columns 3100 mm
Table height above floor 900 mm
Cutting angle adjustment 0.5 - 3 °
Number of strokes 6 - 13 strokes/min
Back gauge - adjustable 1000 mm
Hold-down device 18 pcs
Oil capacity 350 l
Total power requirement 22.5 kW
Machine weight approx. 8 t
Machine dimensions L x W x H 3.96 x 2.10 x 2.22 m
accessories electr. backgauge, spare blade
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this AMADA GPN 1230 manufactured?
This AMADA GPN 1230 hydraulic shear was manufactured in 1991.
What is the cutting capacity of this Atlantic ATS 3012?
This Atlantic ATS 3012 hydraulic shear has a cutting capacity of 3050 x 12 mm.
Does this Atlantic ATS 3012 have an electric back gauge?
This Atlantic ATS 3012 hydraulic shear features an electric back gauge.
What is the stand width of this Atlantic ATS 3012?
This Atlantic ATS 3012 hydraulic shear has a stand width of 3100 mm.
Are spare blades included with this Atlantic ATS 3012?
This Atlantic ATS 3012 hydraulic shear includes spare blades as part of the included equipment.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 34 |
| Last activity | Oct. 31, 2026 |
Hans Klein Werkzeugmaschinen-Handel GmbH is a leading player in the German machinery trading sector, specializing in high-quality tool machines. With a rich history and a commitment to excellence, the company has established itself as a trusted partner for businesses seeking reliable and innovative machinery solutions. Their extensive portfolio includes a wide range of products, catering to various industries, from manufacturing to construction. At Hans Klein, customer satisfaction is paramount. The company prides itself on providing not only top-notch machinery but also exceptional service and support. Their knowledgeable team is dedicated to understanding the unique needs of each client, ensuring that they find the perfect tools to enhance productivity and efficiency. Whether you are a small workshop or a large industrial operation, Hans Klein has the expertise and resources to meet your requirements. In addition to their impressive product offerings, Hans Klein Werkzeugmaschinen-Handel GmbH is committed to sustainability and innovation. They continuously seek out the latest advancements in technology to provide clients with cutting-edge solutions that drive success. By choosing Hans Klein, businesses can rest assured they are investing in quality and reliability, backed by a company that values long-term relationships and growth. Discover the difference that Hans Klein Werkzeugmaschinen-Handel GmbH can make for your business. With their dedication to quality, service, and innovation, they are poised to help you achieve your operational goals and elevate your business to new heights.
Guillotine shears - hydraulic
Make Atlantic
Type ATS 3012
Year of construction 1990
Sheet width 3050 mm
Sheet thickness 12 mm
Distance between columns 3100 mm
Table height above floor 900 mm
Cutting angle adjustment 0.5 - 3 °
Number of strokes 6 - 13 strokes/min
Back gauge - adjustable 1000 mm
Hold-down device 18 pcs
Oil capacity 350 l
Total power requirement 22.5 kW
Machine weight approx. 8 t
Machine dimensions L x W x H 3.96 x 2.10 x 2.22 m
accessories electr. backgauge, spare blade
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
When was this AMADA GPN 1230 manufactured?
This AMADA GPN 1230 hydraulic shear was manufactured in 1991.
What is the cutting capacity of this Atlantic ATS 3012?
This Atlantic ATS 3012 hydraulic shear has a cutting capacity of 3050 x 12 mm.
Does this Atlantic ATS 3012 have an electric back gauge?
This Atlantic ATS 3012 hydraulic shear features an electric back gauge.
What is the stand width of this Atlantic ATS 3012?
This Atlantic ATS 3012 hydraulic shear has a stand width of 3100 mm.
Are spare blades included with this Atlantic ATS 3012?
This Atlantic ATS 3012 hydraulic shear includes spare blades as part of the included equipment.
The following questions and answers are generated using artificial intelligence based on the product information available. They are provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This listing features an Atlantic ATS 3012 hydraulic guillotine shear manufactured in 1990. The machine is designed for cutting sheet metal with a maximum cutting length of 3050 mm and a maximum sheet thickness capacity of 12 mm. It offers a cutting angle adjustment range from 0.5° to 3°, allowing for precise angle control during cutting operations. The back gauge is electrically adjustable up to 1000 mm, enhancing positioning accuracy for repetitive cuts.
The machine measures approximately 3960 mm in length, 2100 mm in width, and 2220 mm in height, with a total weight of about 8000 kg. It operates with a total power requirement of 22.5 kW and has an oil capacity of 350 liters. The machine features 18 hold-down devices to secure the material during cutting, contributing to stable and accurate shearing.
The hydraulic shear is equipped with an electric back gauge and comes with a spare blade. The control panel is located on the upper left side of the machine and includes various buttons and rotary knobs, including a green start button marked "START" and an emergency stop switch mounted on the front lower left side for safety. The blade area is protected by a yellow safety guard with an orange protective grille, ensuring operator safety during use.
The machine shows visible signs of use, including scratches and wear on the exterior paint surface and some paint chipping on the control panel. The rear side exposes mechanical components such as the motor and hydraulic system, with some dirt accumulation and wear visible on the back panel and base. Metal support bars are present on the work surface to hold material during cutting. Overall, the machine appears structurally intact without visible major damage, suitable for industrial workshop environments.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 34 |
| Last activity | Oct. 31, 2026 |
Hans Klein Werkzeugmaschinen-Handel GmbH is a leading player in the German machinery trading sector, specializing in high-quality tool machines. With a rich history and a commitment to excellence, the company has established itself as a trusted partner for businesses seeking reliable and innovative machinery solutions. Their extensive portfolio includes a wide range of products, catering to various industries, from manufacturing to construction. At Hans Klein, customer satisfaction is paramount. The company prides itself on providing not only top-notch machinery but also exceptional service and support. Their knowledgeable team is dedicated to understanding the unique needs of each client, ensuring that they find the perfect tools to enhance productivity and efficiency. Whether you are a small workshop or a large industrial operation, Hans Klein has the expertise and resources to meet your requirements. In addition to their impressive product offerings, Hans Klein Werkzeugmaschinen-Handel GmbH is committed to sustainability and innovation. They continuously seek out the latest advancements in technology to provide clients with cutting-edge solutions that drive success. By choosing Hans Klein, businesses can rest assured they are investing in quality and reliability, backed by a company that values long-term relationships and growth. Discover the difference that Hans Klein Werkzeugmaschinen-Handel GmbH can make for your business. With their dedication to quality, service, and innovation, they are poised to help you achieve your operational goals and elevate your business to new heights.
Atlantic ATS 3012
Hydraulické nůžky / gilotiny Atlantic ATS 3012
Atlantic ATS 3012
Atlantic ATS 3012 Hydraulische Blechschere
Atlantic ATS 3012
Atlantic ATS 3012 hydraulic shear
Cizalla guillotina hidráulica Atlantic ATS 3012
Cisaille guillotine hydraulique Atlantic ATS 3012
Atlantic ATS 3012
Atlantic ATS 3012
Cesoia ghigliottina idraulica Atlantic ATS 3012
Atlantic ATS 3012
Atlantic ATS 3012
Nożyce gilotynowe hydrauliczne Atlantic ATS 3012
Atlantic ATS 3012
Atlantic ATS 3012
Atlantic ATS 3012 Гидравлические гильотинные ножницы
Atlantic ATS 3012
Atlantic ATS 3012
Hidrolik giyotin makas Atlantic ATS 3012
EN
- Languages
English (GB)