Contact us to receive an offer.
| Manufacturer | ARCO International Srl |
|---|---|
| Model | ARCO MODUL/HS |
| Year | 2007 |
| Location | Italy
|
The ARCO International Srl ARCO MODUL/HS is a horizontal panel saw designed for industrial use, manufactured in 2007. It features a cutting length of 1300 mm and can handle panel thicknesses up to 60 mm. The machine is powered by a 7.5 kW engine and is equipped with a circular blade of 300 mm diameter. A scoring unit is included, enhancing the quality of cuts by preventing surface splintering.
The system comprises multiple components to facilitate efficient cutting and material handling. It includes a motorized roller conveyor with side aligners for precise material positioning and smooth feeding. Before the cutting area, there are two lower motorized drivers and two upper motorized contrast drivers to ensure stable material transport. Post-cutting, the machine features motorized lower and upper drivers to assist in material discharge.
Additional elements include a blade trolley and cutting units integrated with two circular saw blades. The machine also incorporates a trim unloading device and two lateral aligners positioned before and after the cut to maintain alignment accuracy. The maximum entry bar length supported is 4250 mm, with a minimum length of 2000 mm, and the machine can cut panels with widths up to 1300 mm, accommodating coupled bars up to 1330 mm wide.
The ARCO MODUL/HS is designed for cutting two overlapping bars with a combined thickness of up to 60 mm (30 mm each). It supports trimming with a maximum front trim of 300 mm and a rear trim of 50 mm. The machine is equipped with a roller conveyor system for efficient material handling, as well as visible pneumatic or hydraulic components associated with the cutting unit. The overall condition appears well-maintained and clean, with no visible damage, indicating careful upkeep. Electrical cables and control boxes are positioned near the machine base, and a cable carrier system protects electrical cables and hoses, contributing to operational safety and reliability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
SYSTEM COMPOSITION:
1. no. 1 motorized rollerway with side aligners
2. no. 2 lower motorized drivers before cutting
3. no. 2 upper motorized contrast drivers before cutting
4. blade trolley
5. cutting units
6. circular blade
7. no. 1 motorized lower driver after cutting
8. n. 1 motorized upper driver after cutting
9. trim unloading device
10. n. 2 lateral aligners placed one before and one after the cut
• max. length entry bar 4250 mm
• min. length entry bar 2000 mm
• min length of last sectioned piece 265 mm
• min length of sectioned piece 250 mm
• max. width entry bar 1300 mm
• max. width coupled bars at the entrance 1330 mm
• min. width entry bar 165 mm
• max. thickness 60mm panel
• cutting of two overlapping bars max (30x2) 60 mm
• min. thickness 15mm panel
• trimming max. front 300mm
• trimming max. rear 50mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 2 |
| Last activity | Feb. 11, 2025 |
SYSTEM COMPOSITION:
1. no. 1 motorized rollerway with side aligners
2. no. 2 lower motorized drivers before cutting
3. no. 2 upper motorized contrast drivers before cutting
4. blade trolley
5. cutting units
6. circular blade
7. no. 1 motorized lower driver after cutting
8. n. 1 motorized upper driver after cutting
9. trim unloading device
10. n. 2 lateral aligners placed one before and one after the cut
• max. length entry bar 4250 mm
• min. length entry bar 2000 mm
• min length of last sectioned piece 265 mm
• min length of sectioned piece 250 mm
• max. width entry bar 1300 mm
• max. width coupled bars at the entrance 1330 mm
• min. width entry bar 165 mm
• max. thickness 60mm panel
• cutting of two overlapping bars max (30x2) 60 mm
• min. thickness 15mm panel
• trimming max. front 300mm
• trimming max. rear 50mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The ARCO International Srl ARCO MODUL/HS is a horizontal panel saw designed for industrial use, manufactured in 2007. It features a cutting length of 1300 mm and can handle panel thicknesses up to 60 mm. The machine is powered by a 7.5 kW engine and is equipped with a circular blade of 300 mm diameter. A scoring unit is included, enhancing the quality of cuts by preventing surface splintering.
The system comprises multiple components to facilitate efficient cutting and material handling. It includes a motorized roller conveyor with side aligners for precise material positioning and smooth feeding. Before the cutting area, there are two lower motorized drivers and two upper motorized contrast drivers to ensure stable material transport. Post-cutting, the machine features motorized lower and upper drivers to assist in material discharge.
Additional elements include a blade trolley and cutting units integrated with two circular saw blades. The machine also incorporates a trim unloading device and two lateral aligners positioned before and after the cut to maintain alignment accuracy. The maximum entry bar length supported is 4250 mm, with a minimum length of 2000 mm, and the machine can cut panels with widths up to 1300 mm, accommodating coupled bars up to 1330 mm wide.
The ARCO MODUL/HS is designed for cutting two overlapping bars with a combined thickness of up to 60 mm (30 mm each). It supports trimming with a maximum front trim of 300 mm and a rear trim of 50 mm. The machine is equipped with a roller conveyor system for efficient material handling, as well as visible pneumatic or hydraulic components associated with the cutting unit. The overall condition appears well-maintained and clean, with no visible damage, indicating careful upkeep. Electrical cables and control boxes are positioned near the machine base, and a cable carrier system protects electrical cables and hoses, contributing to operational safety and reliability.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2009 |
| Offers online | 2 |
| Last activity | Feb. 11, 2025 |
ARCO International Srl ARCO MODUL/HS
Pila na panely ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS Plattenaufteilsäge
ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS Panel saw
Seccionadora ARCO International Srl ARCO MODUL/HS
Scie à panneaux ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS
LINEA DI SEZIONATURA TRASVERSALE PER BARRE RIVESTITE USATA MODUL/HS
ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS
Używana piła panelowa ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS Форматно-обрезной станок
ARCO International Srl ARCO MODUL/HS
ARCO International Srl ARCO MODUL/HS
Panel testere ARCO International Srl ARCO MODUL/HS
EN
- Languages
English (GB)