| Category | Injection moulding machines |
| Clamping force | 400 T |
| Screw diameter | 65 mm |
| Tie bar spacing (H) | 820 mm |
| Tie bar spacing (V) | 820 mm |
| Shot volume | 1078 cm³ |
| Shot weight | 384 g |
| Pressure on material | 2500 bar |
| Platen length | 1171 mm |
| Platen width | 1171 mm |
| Bi-metal screw | No |
| Equipped with robot | No |
| Robot interface | |
| Opening of the press | 700 mm |
| Mould size | |
| Weight | 17 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Arburg Allrounder 820 S 4000-2100 |
| Last availability date | 21/11/2026 |
| Product id | P261119163 |
| Language |
Arburg Allrounder 820 S 4000-1300 hydraulic injection moulding machine, manufactured in 2004. The machine has a stated clamping force of 400 tonnes (4,000 kN) and injection unit size 1300. The current description reports approximately 75,125 operating hours.
Electrical details listed for the machine include an operating voltage of 400 V, three-phase, 50 Hz; control voltage of 230 V, 50 Hz and 24 V DC; rated current of 188.0 A for the motor and 65.0 A for heating; and total connected load of 152.0 kW.
The equipment is shown with a material hopper and flexible conveying hoses mounted above the machine. The surrounding production cell includes auxiliary temperature-control units, multiple hoses and cables, and a conveyor belt extending from the machine. Metal mesh safety fencing and access doors enclose part of the cell. Overhead gantry or rail equipment is also present. The auxiliary-equipment plate identifies an ARBURG MULTILIFT V Queraufbau; the listing describes the MULTILIFT V as optional.
The machine identification plate identifies the model as an ARBURG ALLROUNDER SELECTA 820 S 4000-1300 and records a manufactured date of 06/2004. No operating-condition claim is made here. Please note that the listed operating hours and electrical details are provided as stated in the current description; condition and completeness of the machine and auxiliary equipment are not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This Arburg Allrounder 820 S 4000-1300 was manufactured in 2004. This hydraulic injection moulding machine has a clamping force of 400 tonnes and approximately 75,125 operating hours. Its machine weight is approximately 17 tonnes. Consider the opportunity to buy this Arburg Allrounder 820 S 4000-1300 hydraulic injection moulding machine. Contact us for further details.- Injection Unit Size: 1300
- Operating Voltage: 400 V, 3-phase, 50 Hz
- Control Voltage: 230 V, 50 Hz / 24 V DC
- Rated Current (Motor / Heating): 188.0 A / 65.0 A
- Total Connected Load: 152.0 kW
- Optional ARBURG MULTILIFT V
- Additional Peripheral Equipment Observed: Material hopper loader mounted on injection unit, multi-circuit water flow regulators/manifolds, two floor-standing temperature control units (TCUs), safety fencing enclosure with access gate, and an outfeed conveyor belt.
Clamping Force: 4000 kN
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2034 |
| Last activity | Nov. 21, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This Arburg Allrounder 820 S 4000-1300 was manufactured in 2004. This hydraulic injection moulding machine has a clamping force of 400 tonnes and approximately 75,125 operating hours. Its machine weight is approximately 17 tonnes. Consider the opportunity to buy this Arburg Allrounder 820 S 4000-1300 hydraulic injection moulding machine. Contact us for further details.- Injection Unit Size: 1300
- Operating Voltage: 400 V, 3-phase, 50 Hz
- Control Voltage: 230 V, 50 Hz / 24 V DC
- Rated Current (Motor / Heating): 188.0 A / 65.0 A
- Total Connected Load: 152.0 kW
- Optional ARBURG MULTILIFT V
- Additional Peripheral Equipment Observed: Material hopper loader mounted on injection unit, multi-circuit water flow regulators/manifolds, two floor-standing temperature control units (TCUs), safety fencing enclosure with access gate, and an outfeed conveyor belt.
Clamping Force: 4000 kN
Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.
| Category | Injection moulding machines |
| Clamping force | 400 T |
| Screw diameter | 65 mm |
| Tie bar spacing (H) | 820 mm |
| Tie bar spacing (V) | 820 mm |
| Shot volume | 1078 cm³ |
| Shot weight | 384 g |
| Pressure on material | 2500 bar |
| Platen length | 1171 mm |
| Platen width | 1171 mm |
| Bi-metal screw | No |
| Equipped with robot | No |
| Robot interface | |
| Opening of the press | 700 mm |
| Mould size | |
| Weight | 17 kg |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Arburg Allrounder 820 S 4000-2100 |
| Last availability date | 21/11/2026 |
| Product id | P261119163 |
| Language |
Arburg Allrounder 820 S 4000-1300 hydraulic injection moulding machine, manufactured in 2004. The machine has a stated clamping force of 400 tonnes (4,000 kN) and injection unit size 1300. The current description reports approximately 75,125 operating hours.
Electrical details listed for the machine include an operating voltage of 400 V, three-phase, 50 Hz; control voltage of 230 V, 50 Hz and 24 V DC; rated current of 188.0 A for the motor and 65.0 A for heating; and total connected load of 152.0 kW.
The equipment is shown with a material hopper and flexible conveying hoses mounted above the machine. The surrounding production cell includes auxiliary temperature-control units, multiple hoses and cables, and a conveyor belt extending from the machine. Metal mesh safety fencing and access doors enclose part of the cell. Overhead gantry or rail equipment is also present. The auxiliary-equipment plate identifies an ARBURG MULTILIFT V Queraufbau; the listing describes the MULTILIFT V as optional.
The machine identification plate identifies the model as an ARBURG ALLROUNDER SELECTA 820 S 4000-1300 and records a manufactured date of 06/2004. No operating-condition claim is made here. Please note that the listed operating hours and electrical details are provided as stated in the current description; condition and completeness of the machine and auxiliary equipment are not specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2034 |
| Last activity | Nov. 21, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.