Arburg ALLROUNDER 720 S 3200-1300 Injection moulding machine

Top seller

Price on request

View price
Manufacturer Arburg
Model ALLROUNDER 720 S 3200-1300
Year 2016
Location Germany DE

Automatic description (AI-Generated)

ARBURG ALLROUNDER 720 S 3200-1300 hydraulic injection moulding machine, manufactured in 2016. The machine has a clamping force of 320 tonnes and a 55 mm screw diameter. It is equipped with an ARBURG MULTILIFT SELECT robot and a SELOGICA control system. The listed configuration includes three core pull units and nine additional mould-heating zones.

The clamping unit uses servo-regulated technology with variable-displacement pumps and programmable clamping-force buildup. The plasticising unit has a wear- and corrosion-resistant cylinder and a reinforced screw coupling. The machine also features automatic mould-height adjustment and a central injection position. Its SELOGICA direct control includes a touchscreen interface and sequence editor, along with production, monitoring, optimisation and quality-assurance functions.

The robot is a transverse handling unit with servo-electric movement, vacuum circuits and pneumatic equipment. Robot-related interfaces and programmable inputs are specified. A green takeaway conveyor and mesh safety guarding are present alongside the machine and handling area. A separate wheeled temperature-control unit is positioned beside the machine.

The machine and robot are identified as ARBURG equipment, and the SELOGICA control panel is present. The exterior appears to have no obvious major damage; operational condition has not been specified. No claim of testing or working status is made.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.

Seller's description

Hydraulic injection moulding machine manufactured in 2016. This ARBURG ALLROUNDER 720 S 3200-1300 has a clamping force of 3,200 kN and a 55 mm screw diameter. It includes a SELOGICA direct control unit and an ARBURG MULTILIFT SELECT robot with a 15 kg payload. Consider the opportunity to buy this ARBURG ALLROUNDER 720 S 3200-1300 hydraulic injection moulding machine. Contact us for further details.- Clamping Force: 3,200 kN (320 tonnes)
- Operating Voltage: 400 V 3~ 50 Hz
- Control Voltage: 230 V ~ 50 Hz / 24 V DC
- Motor/Heating Rated Current: 125 / 70 A
- Total Connected Load: 124 kW
- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump
- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)
- Screw Coupling: Reinforced spline geometry for high continuous dosing torques
- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band
- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)
- Platen / Centring: Central injection position, 160 mm centring diameter
- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control
- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)
- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)
- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet
- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling
- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor
- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)
- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)
- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2
- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)
- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot
- Robot Weight: 450 kg
- Max. Handling Payload: 15 kg
- Control Unit: SELOGICA
- Pneumatic Operating Pressure: 0.6 MPa (6 bar)
- Drive: 3 CNC servo-electric axes (X, Y, Z) operable simultaneously
- Stroke X-axis (parallel): Extended to 900 mm (S900)
- Stroke Y-axis (immersion): 1,200 mm (S1200)
- Stroke Z-axis (transverse): Extended to 2,400 mm (S2400)
- C-Axis: Pneumatic tilting axis (0°/90°, 28 Nm at 6 bar, weight 2.6 kg)
- Vacuum Equipment: 3 independent Venturi-principle vacuum circuits (23 l/min each) with vacuum switches
- Pneumatics: Pneumatic maintenance unit (6 bar operating pressure); 5/3 directional control valve with closed centre position; pneumatic valves piped to gripper flange with quick-release couplings (DN 2.7)
- Robot Sensors & I/O: 8 programmable sensor inputs on gripper flange (25-pin plug, matching mating connector included); interface with 4 programmable potential-free I/Os (42-pin socket)
- Safety Enclosure: Protective wire-mesh perimeter safety fence with electrically interlocked swing door and conveyor belt opening
- Optional Peripherals:
- Conveyor Belt: Width 1,000 mm, length 3,000 mm, discharge height 1,300 ± 200 mm, heat-resistant up to 80 °C, 230 V power feed interface, including foot switch for start/stop/jogging
Clamping Force: 3200 kN

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.


Client type Machinery dealer
Active since 2019
Offers online 2034
Last activity Nov. 21, 2026

GINDUMAC GmbH Top seller

GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.

Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.

GINDUMAC GmbH

Seller's description

Hydraulic injection moulding machine manufactured in 2016. This ARBURG ALLROUNDER 720 S 3200-1300 has a clamping force of 3,200 kN and a 55 mm screw diameter. It includes a SELOGICA direct control unit and an ARBURG MULTILIFT SELECT robot with a 15 kg payload. Consider the opportunity to buy this ARBURG ALLROUNDER 720 S 3200-1300 hydraulic injection moulding machine. Contact us for further details.- Clamping Force: 3,200 kN (320 tonnes)
- Operating Voltage: 400 V 3~ 50 Hz
- Control Voltage: 230 V ~ 50 Hz / 24 V DC
- Motor/Heating Rated Current: 125 / 70 A
- Total Connected Load: 124 kW
- Clamping Unit / Technology: Technology Stage 2 (servo-regulated) with two variable displacement pumps; programmable and regulated clamping force buildup held via servo-regulated second pump
- Screw Diameter: 55 mm (wear- and corrosion-resistant plasticising cylinder unit with sintered metal non-return valve)
- Screw Coupling: Reinforced spline geometry for high continuous dosing torques
- Nozzle: Open nozzle 55 mm with internal thread M36x2, extended nozzle tip by 25 mm (R 35), equipped with heating band
- Needle Shut-off Nozzle Controls: Electrical and hydraulic control for 4 hydraulic needle shut-off nozzles in mould (for Injection 1)
- Platen / Centring: Central injection position, 160 mm centring diameter
- Mould Height Adjustment: Automatic mould height adjustment via SELOGICA control
- Core Pull Controls: 3 core pull units (1st core pull servo-regulated for simultaneous/serial movements with programmable pressure/flow; 2nd and 3rd core pull controls for serial movements with check valve holding pressure and programmable pressure/flow)
- Hot Runner Zones: 9 additional heating control zones for mould heating (max. 2 kW / 230 V per circuit, HAN 24 E connector, Hasco pinout), with zones 1–3 having increased power up to 3.6 kW / 230 V (16 A each)
- Cooling Circuits: Regulated machine cooling circuits; separate machine and mould cooling lines; 4 free cooling circuits on fixed platen; 4 free cooling circuits on movable platen (without shut-off valves); water-cooled electrical switch cabinet
- Hydraulic System: ARBURG Energy Saving System (AES) with variable-speed water-cooled drive motor (applicable for 15–75 kW, 380–480 V, 50–60 Hz); continuous oil circulation with auxiliary pump for bypass filtration/cooling
- Control Unit: SELOGICA direct interface with touchscreen display (15-inch / 38.1 cm) and sequence editor
- Software & Option Packages: Productivity package, Extended Movements package, Production Control package, Extended Monitoring package, Optimization/Operating Aids package, Quality Assurance package, Documentation package (actual value log)
- Electrical / Interfaces: CompactFlash interface; EUROMAP chip card authorization; Mobile SELOGICA AMS connection; EUROMAP 67 robot interface (50-pin); EUROMAP 73 safety fence door interlock interface; temperature control unit interface (20 mA, up to 6 units); colour dosing unit interface; USB printer serial interface; 4 freely programmable I/O channels; socket combination (1x CEE, 1x Schuko 230 V plus additional switchable combination)
- Blow-off Units: Electrical preparation for retrofitting air blow-off units 1 & 2
- Machine Mounts: Vibration-damping elastomeric machine mounts (Schwingmetall)
- Optional Automation / Robot: ARBURG MULTILIFT SELECT 15KG transverse robot
- Robot Weight: 450 kg
- Max. Handling Payload: 15 kg
- Control Unit: SELOGICA
- Pneumatic Operating Pressure: 0.6 MPa (6 bar)
- Drive: 3 CNC servo-electric axes (X, Y, Z) operable simultaneously
- Stroke X-axis (parallel): Extended to 900 mm (S900)
- Stroke Y-axis (immersion): 1,200 mm (S1200)
- Stroke Z-axis (transverse): Extended to 2,400 mm (S2400)
- C-Axis: Pneumatic tilting axis (0°/90°, 28 Nm at 6 bar, weight 2.6 kg)
- Vacuum Equipment: 3 independent Venturi-principle vacuum circuits (23 l/min each) with vacuum switches
- Pneumatics: Pneumatic maintenance unit (6 bar operating pressure); 5/3 directional control valve with closed centre position; pneumatic valves piped to gripper flange with quick-release couplings (DN 2.7)
- Robot Sensors & I/O: 8 programmable sensor inputs on gripper flange (25-pin plug, matching mating connector included); interface with 4 programmable potential-free I/Os (42-pin socket)
- Safety Enclosure: Protective wire-mesh perimeter safety fence with electrically interlocked swing door and conveyor belt opening
- Optional Peripherals:
- Conveyor Belt: Width 1,000 mm, length 3,000 mm, discharge height 1,300 ± 200 mm, heat-resistant up to 80 °C, 230 V power feed interface, including foot switch for start/stop/jogging
Clamping Force: 3200 kN

Description provided by the seller (translated automatically). We recommend organizing a visit or a video call to confirm the details before you buy.



Automatic description (AI-Generated)

ARBURG ALLROUNDER 720 S 3200-1300 hydraulic injection moulding machine, manufactured in 2016. The machine has a clamping force of 320 tonnes and a 55 mm screw diameter. It is equipped with an ARBURG MULTILIFT SELECT robot and a SELOGICA control system. The listed configuration includes three core pull units and nine additional mould-heating zones.

The clamping unit uses servo-regulated technology with variable-displacement pumps and programmable clamping-force buildup. The plasticising unit has a wear- and corrosion-resistant cylinder and a reinforced screw coupling. The machine also features automatic mould-height adjustment and a central injection position. Its SELOGICA direct control includes a touchscreen interface and sequence editor, along with production, monitoring, optimisation and quality-assurance functions.

The robot is a transverse handling unit with servo-electric movement, vacuum circuits and pneumatic equipment. Robot-related interfaces and programmable inputs are specified. A green takeaway conveyor and mesh safety guarding are present alongside the machine and handling area. A separate wheeled temperature-control unit is positioned beside the machine.

The machine and robot are identified as ARBURG equipment, and the SELOGICA control panel is present. The exterior appears to have no obvious major damage; operational condition has not been specified. No claim of testing or working status is made.

The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.


About this seller

Client type Machinery dealer
Active since 2019
Offers online 2034
Last activity Nov. 21, 2026

GINDUMAC GmbH Top seller

GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.

Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.

GINDUMAC GmbH

Here is a selection of similar machines - Arburg ALLROUNDER 720 S 3200-1300


Used Injection Molding Machines in Germany for Sale

Browse used injection molding machines located in Germany on Exapro, including Arburg Allrounder, KraussMaffei, Engel, Sumitomo Demag and Wittmann Battenfeld presses. Filter by clamping force, shot volume and control to source molding capacity.

Arburg ALLROUNDER 720 S 3200-1300 Injection moulding machine