Contact us to receive an offer.
| Manufacturer | Arburg |
|---|---|
| Model | 320C 500-170 |
| Year | 2015 |
| Location | Slovakia
|
This Arburg 320C 500-170 injection moulding machine, manufactured in 2015, is designed for efficient thermoplastics processing. It features a clamping force of 500 kN (50 tons) and a screw diameter of 30 mm, suitable for a variety of injection moulding applications. The machine's tie bar spacing measures 320 mm by 320 mm, providing a stable clamping unit. The maximum opening of the press is 550 mm, allowing for flexible mould installation and part ejection.
The injection unit is equipped with a high wear-resistant 30 mm screw, designed for durability and consistent material injection. The maximum shot weight is 77 grams, with an injection pressure capability of up to 2000 bar, supporting precise and high-pressure injection cycles.
The machine weighs approximately 2400 kg and has a compact footprint, making it suitable for various production environments. It is equipped with a Selogica direct control system, providing user-friendly operation through a control panel featuring a screen and buttons located on the right side of the machine.
Safety features include a yellow safety door that encloses the clamping unit and a safety light indicator mounted atop the control panel, enhancing operator safety during operation. The machine appears clean and well-maintained, indicating careful handling and upkeep.
Additional features include interfaces for robot integration (EUROMAP 67) and electrical safety interlocks (EUROMAP 73), facilitating automation and compliance with safety standards. The hydraulic system utilizes a dual-pump setup, ensuring efficient clamping and injection cycles.
Overall, this Arburg injection moulding machine combines robust mechanical specifications with essential safety and control features, making it a reliable choice for industrial plastic part production.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine Machine Equipment / Configuration Control system: Selogica Direct controller Hydraulic system: Dual-pump hydraulic system Injection Unit Thermoplastics injection unit, 30 mm screw, high wear resistant design Standard screw coupling with flat-ended geometry Open nozzle, 30 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, for serial movement, holding pressure via check valve Interfaces & Connectivity Robot interface EUROMAP 67 (50-pin) Interface for electrical safety interlock on safety door EUROMAP 73
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 48 |
| Last activity | Oct. 29, 2026 |
Arburg 320 C 500-170 (2015) Golden edition Working hours : 40.167 h Clamping force: 50 t Screw diameter : 30 mm Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW Machine length: approx. 3.4 m Machine width: approx. 1.4 m Machine height: approx. 2.0 m Machine weight: approx. 2 400 kg 2 pumps machine Machine Equipment / Configuration Control system: Selogica Direct controller Hydraulic system: Dual-pump hydraulic system Injection Unit Thermoplastics injection unit, 30 mm screw, high wear resistant design Standard screw coupling with flat-ended geometry Open nozzle, 30 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125 mm Core pull 1, for serial movement, holding pressure via check valve Interfaces & Connectivity Robot interface EUROMAP 67 (50-pin) Interface for electrical safety interlock on safety door EUROMAP 73
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This Arburg 320C 500-170 injection moulding machine, manufactured in 2015, is designed for efficient thermoplastics processing. It features a clamping force of 500 kN (50 tons) and a screw diameter of 30 mm, suitable for a variety of injection moulding applications. The machine's tie bar spacing measures 320 mm by 320 mm, providing a stable clamping unit. The maximum opening of the press is 550 mm, allowing for flexible mould installation and part ejection.
The injection unit is equipped with a high wear-resistant 30 mm screw, designed for durability and consistent material injection. The maximum shot weight is 77 grams, with an injection pressure capability of up to 2000 bar, supporting precise and high-pressure injection cycles.
The machine weighs approximately 2400 kg and has a compact footprint, making it suitable for various production environments. It is equipped with a Selogica direct control system, providing user-friendly operation through a control panel featuring a screen and buttons located on the right side of the machine.
Safety features include a yellow safety door that encloses the clamping unit and a safety light indicator mounted atop the control panel, enhancing operator safety during operation. The machine appears clean and well-maintained, indicating careful handling and upkeep.
Additional features include interfaces for robot integration (EUROMAP 67) and electrical safety interlocks (EUROMAP 73), facilitating automation and compliance with safety standards. The hydraulic system utilizes a dual-pump setup, ensuring efficient clamping and injection cycles.
Overall, this Arburg injection moulding machine combines robust mechanical specifications with essential safety and control features, making it a reliable choice for industrial plastic part production.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 48 |
| Last activity | Oct. 29, 2026 |
Машина за леене под налягане Arburg 320C 500-170
Vstřikolis Arburg 320C 500-170
Arburg 320C 500-170 Sprøjtestøbemaskine
Arburg 320C 500-170 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Arburg 320C 500-170
Arburg 320C 500-170 Injection moulding machine
Inyectora de plástico Arburg 320C 500-170
Presse à injecter Arburg 320C 500-170
Stroj za injekcijsko prešanje Arburg 320C 500-170
Arburg 320C 500-170 Fröccsöntő gép
Pressa ad iniezione Arburg 320C 500-170
Įpurškimo formavimo mašina Arburg 320C 500-170
Arburg 320C 500-170 Spuitgietmachine
Wtryskarka Arburg 320C 500-170
Máquina de injecção Arburg 320C 500-170
Mașină de turnat prin injecție Arburg 320C 500-170
Arburg 320C 500-170 Термопластавтомат
Mašina za brizganje Arburg 320C 500-170
Arburg 320C 500-170 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Arburg 320C 500-170
EN
- Languages
English (GB)