Contact us to receive an offer.
| Manufacturer | Arburg |
|---|---|
| Model | 220-90-350 |
| Year | 1985 |
| Location | Poland
|
The Arburg 220-90-350 is a plastic injection molding machine manufactured in 1985 by ARBURG Maschinenfabrik Hehl & Söhne GmbH & Co. KG, made in West Germany. This model features a clamping force of 35 tons (350 kN) and is equipped with a bi-metal screw with a diameter of 25 mm. The machine has a shot volume of 43 cm³ and a shot weight of 35 g, operating at a pressure on the material of 2100 bar. Its platen measures 346 mm by 346 mm, with tie bar spacing of 221 mm both horizontally and vertically. The machine dimensions are approximately 3300 mm in length, 1700 mm in width, and 1500 mm in height, with a weight of around 1700 kg.
The injection molding machine has a yellow and green body and includes a visible hopper at the rear for feeding material. The clamping unit is covered with a yellow protective cover, and the injection unit includes a hopper and barrel assembly. The control panel, labeled ARBURG, features multiple dials, switches, and indicator lights, including an analog meter labeled ARBURG rotatron. The control cabinet is housed in a green metal enclosure and contains various schematic diagrams and a yellow main power switch.
The machine shows signs of use with some dirt, wear marks, and debris around the control panel, including some colored plastic fragments. Wiring and tubing are visible around the control panel area. The machine is currently located indoors in a workshop setting in Warsaw and is available for viewing. Note that this unit is not equipped with a robot.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Arburg 220-90-350 Injection Molding Machine
Plastic injection molding machine.
The machine is available for viewing in Warsaw - in continuous operation.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 5 |
| Last activity | Sept. 24, 2026 |
Arburg 220-90-350 Injection Molding Machine
Plastic injection molding machine.
The machine is available for viewing in Warsaw - in continuous operation.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The Arburg 220-90-350 is a plastic injection molding machine manufactured in 1985 by ARBURG Maschinenfabrik Hehl & Söhne GmbH & Co. KG, made in West Germany. This model features a clamping force of 35 tons (350 kN) and is equipped with a bi-metal screw with a diameter of 25 mm. The machine has a shot volume of 43 cm³ and a shot weight of 35 g, operating at a pressure on the material of 2100 bar. Its platen measures 346 mm by 346 mm, with tie bar spacing of 221 mm both horizontally and vertically. The machine dimensions are approximately 3300 mm in length, 1700 mm in width, and 1500 mm in height, with a weight of around 1700 kg.
The injection molding machine has a yellow and green body and includes a visible hopper at the rear for feeding material. The clamping unit is covered with a yellow protective cover, and the injection unit includes a hopper and barrel assembly. The control panel, labeled ARBURG, features multiple dials, switches, and indicator lights, including an analog meter labeled ARBURG rotatron. The control cabinet is housed in a green metal enclosure and contains various schematic diagrams and a yellow main power switch.
The machine shows signs of use with some dirt, wear marks, and debris around the control panel, including some colored plastic fragments. Wiring and tubing are visible around the control panel area. The machine is currently located indoors in a workshop setting in Warsaw and is available for viewing. Note that this unit is not equipped with a robot.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 5 |
| Last activity | Sept. 24, 2026 |
Машина за леене под налягане Arburg 220-90-350
Vstřikolis Arburg 220-90-350
Arburg 220-90-350 Sprøjtestøbemaskine
Arburg 220-90-350 Spritzgießmaschine
Μηχανή χύτευσης με έγχυση Arburg 220-90-350
Arburg 220-90-350 Injection moulding machine
Inyectora de plástico Arburg 220-90-350
Presse à injecter Arburg 220-90-350
Stroj za injekcijsko prešanje Arburg 220-90-350
Arburg 220-90-350 Fröccsöntő gép
Pressa ad iniezione Arburg 220-90-350
Įpurškimo formavimo mašina Arburg 220-90-350
Arburg 220-90-350 Spuitgietmachine
Wtryskarka Arburg 220-90-350
Máquina de injecção Arburg 220-90-350
Mașină de turnat prin injecție Arburg 220-90-350
Arburg 220-90-350 Термопластавтомат
Mašina za brizganje Arburg 220-90-350
Arburg 220-90-350 Formsprutningsmaskin
Enjeksiyon kalıplama makinesi Arburg 220-90-350
EN
- Languages
English (GB)