Contact us to receive an offer.
| Manufacturer | AMADAGroup |
|---|---|
| Model | ITS2 |
| Year | 2000 |
| Location | Switzerland
|
AMADA ITS2 press brake with PROMECAM control. The machine is listed as a press brake with four axes and a maximum bending length of 1,250 mm. Its listed pressing force is 25; no unit is specified. The distance between uprights is 1,020 mm, and the passage between press bars is 320 mm. Maximum stroke is 100 mm, with a throat depth of 200 mm.
The listed feed rate is 75 mm/s, working speed is 10 mm/s, and return stroke speed is 80 m/min. The table measures 1,200 mm in length and 60 mm in width, with a table height of 865 mm. The specification lists six spacers, each 120 mm high, and one cylinder. Oil capacity is 30 litres.
Electrical supply is listed as 3 × 400 V at 50 Hz, and motor power is 4 kW. Approximate machine weight is 1,600 kg. Overall dimensions are listed as 1,800 mm long, 1,200 mm wide and 2,000 mm high.
The updated product information gives the year of manufacture as 2000 and the technical condition as “as-is, where-is.” No further condition details or included accessories are specified. The machine is identified by the manufacturer as AMADA and by model as ITS2. Specifications are reproduced as provided; the pressing-force unit is not stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Manufacturer: AMADA Group
Model: ITS2
Year of manufacture: 2000
Machine type: Press brake
Control system: PROMECAM
Technical condition: As-is, where-is
Number of axes: 4
Pressing force: 25
Maximum bending length: 1,250 mm
Distance between uprights: 1,020 mm
Passage between press bars: 320 mm
Maximum stroke: 100 mm
Throat depth: 200 mm
Feed rate: 75 mm/s
Working speed: 10 mm/s
Return stroke speed: 80 m/min
Table length: 1,200 mm
Table width: 60 mm
Table height: 865 mm
Number of spacers: 6
Spacer height: 120 mm
Number of cylinders: 1
Oil capacity: 30 l
Electrical supply: 3 × 400 V, 50 Hz
Motor power: 4 kW
Machine weight: Approximately 1,600 kg
Overall dimensions (L × W × H): 1,800 × 1,200 × 2,000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 261 |
| Last activity | Nov. 17, 2026 |
Manufacturer: AMADA Group
Model: ITS2
Year of manufacture: 2000
Machine type: Press brake
Control system: PROMECAM
Technical condition: As-is, where-is
Number of axes: 4
Pressing force: 25
Maximum bending length: 1,250 mm
Distance between uprights: 1,020 mm
Passage between press bars: 320 mm
Maximum stroke: 100 mm
Throat depth: 200 mm
Feed rate: 75 mm/s
Working speed: 10 mm/s
Return stroke speed: 80 m/min
Table length: 1,200 mm
Table width: 60 mm
Table height: 865 mm
Number of spacers: 6
Spacer height: 120 mm
Number of cylinders: 1
Oil capacity: 30 l
Electrical supply: 3 × 400 V, 50 Hz
Motor power: 4 kW
Machine weight: Approximately 1,600 kg
Overall dimensions (L × W × H): 1,800 × 1,200 × 2,000 mm
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
AMADA ITS2 press brake with PROMECAM control. The machine is listed as a press brake with four axes and a maximum bending length of 1,250 mm. Its listed pressing force is 25; no unit is specified. The distance between uprights is 1,020 mm, and the passage between press bars is 320 mm. Maximum stroke is 100 mm, with a throat depth of 200 mm.
The listed feed rate is 75 mm/s, working speed is 10 mm/s, and return stroke speed is 80 m/min. The table measures 1,200 mm in length and 60 mm in width, with a table height of 865 mm. The specification lists six spacers, each 120 mm high, and one cylinder. Oil capacity is 30 litres.
Electrical supply is listed as 3 × 400 V at 50 Hz, and motor power is 4 kW. Approximate machine weight is 1,600 kg. Overall dimensions are listed as 1,800 mm long, 1,200 mm wide and 2,000 mm high.
The updated product information gives the year of manufacture as 2000 and the technical condition as “as-is, where-is.” No further condition details or included accessories are specified. The machine is identified by the manufacturer as AMADA and by model as ITS2. Specifications are reproduced as provided; the pressing-force unit is not stated.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2014 |
| Offers online | 261 |
| Last activity | Nov. 17, 2026 |
Belgium
1999
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | mm |
| Axis number | |
| Hole |
Belgium
2000
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | mm |
| Axis number | |
| Hole |
| Strength | 130 T |
|---|---|
| Distance between uprights | 2690 mm |
| Throat | 410 mm |
| Axis number | 4 |
| Folding length | 3060 mm |
|---|---|
| CNC | |
| Working speed | 10 mm/s |
| Engine Power | 18.7 kW |
| Strength | 40 T |
|---|---|
| Distance between uprights | 1050 mm |
| Vertical stroke | 450 mm |
| Axis number | 6 |
| Folding length | 1250 mm |
|---|---|
| CNC | Delem DA66T |
| Working speed | 20 mm/s |
| Engine Power | 15 kW |
Spain
2021
| Strength | 630 T |
|---|---|
| Distance between uprights | 1600 mm |
| Throat | 320 mm |
| Working speed | 8 mm/s |
| Engine Power | 5.5 kW |
| Folding length | 1300 mm |
|---|---|
| CNC | delem da53t |
| Vertical stroke | 100 mm |
| Axis number | 3 |
Austria
1998
| Strength | 85 T |
|---|---|
| Distance between uprights | 2260 mm |
| Throat | 410 mm |
| Working speed | 10 mm/s |
| Engine Power | 11 kW |
| Folding length | 2550 mm |
|---|---|
| CNC | Delem 65 CNC control |
| Vertical stroke | 215 mm |
| Axis number | 6 |
| Hole | Yes |
Poland
2009
| Strength | 1600 T |
|---|---|
| Distance between uprights | 3100 mm |
| Throat | 350 mm |
| Working speed | 9 mm/s |
| Engine Power | 15 kW |
| Folding length | 4100 mm |
|---|---|
| CNC | Elgo P8822 |
| Vertical stroke | 180 mm |
| Axis number | 3 |
Switzerland
2000
| Strength | 200 T |
|---|---|
| CNC | |
| Engine Power | 22 kW |
| Folding length | 3100 mm |
|---|---|
| Vertical stroke | 400 mm |
Slovakia
2003
| Strength | 85 T |
|---|---|
| CNC | TRUMPF |
| Engine Power | 11 kW |
| Folding length | 2500 mm |
|---|---|
| Axis number | 4 |
Austria
2026
| Strength | 220 T |
|---|---|
| Distance between uprights | 3600 mm |
| Throat | 410 mm |
| Working speed | 10 mm/s |
| Engine Power | 22 kW |
| Folding length | 4050 mm |
|---|---|
| CNC | DT15 |
| Vertical stroke | 265 mm |
| Axis number | 3 |
Slovakia
2024
| Strength | 320 T |
|---|---|
| Distance between uprights | 3600 mm |
| Throat | 200 mm |
| Working speed | 200 mm/s |
| Engine Power | 37 kW |
| Folding length | 4050 mm |
|---|---|
| CNC | Yes |
| Vertical stroke | 365 mm |
| Axis number | 4 |
Czech Republic
2006
| Strength | 80 T |
|---|---|
| CNC | Yes |
| Folding length | 2500 mm |
|---|---|
| Axis number | 3 |
| Strength | 70 T |
|---|---|
| Distance between uprights | 2650 mm |
| Throat | 250 mm |
| Working speed | 8 mm/s |
| Engine Power | 7.5 kW |
| Folding length | 3050 mm |
|---|---|
| CNC | DELAM DA-41 |
| Vertical stroke | 100 mm |
| Axis number | 1 |
| Hole | No |
Switzerland
2022
| CNC |
|---|
| Engine Power | 7.5 kW |
|---|
Poland
2009
| Strength | 24.5 T |
|---|---|
| Distance between uprights | 1250 mm |
| Working speed | 8 mm/s |
| Folding length | 1330 mm |
|---|---|
| CNC | cybelec dnc 60 |
| Axis number | 3 |
Czech Republic
1997
| Strength | 100 T |
|---|---|
| CNC | ANO |
| Hole | No |
| Folding length | 3100 mm |
|---|---|
| Axis number | 6 |
Switzerland
1992
| Strength | 200 T |
|---|---|
| Distance between uprights | 3600 mm |
| Throat | 0.61 mm |
| Axis number | 4 |
| Folding length | 4000 mm |
|---|---|
| CNC | PC 15 |
| Vertical stroke | 0.26 mm |
Germany
2006
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | 2100 mm |
|---|---|
| CNC | |
| Vertical stroke | 215 mm |
| Axis number | |
| Hole |
| Strength | 80 T |
|---|---|
| Distance between uprights | 2200 mm |
| Vertical stroke | 100 mm |
| Engine Power | 8 kW |
| Folding length | 2500 mm |
|---|---|
| CNC | MECOS |
| Axis number | 1 |
| Hole | No |
Finland
1999
| Strength | 100 T |
|---|---|
| CNC | Hurco 7 |
| Folding length | 3000 mm |
|---|
Czech Republic
2002
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | 3060 mm |
|---|---|
| CNC | |
| Vertical stroke | 215 mm |
| Axis number | |
| Hole |
| Strength | 120 T |
|---|---|
| CNC | PRG 920-I |
| Hole | No |
| Folding length | 3100 mm |
|---|---|
| Axis number | 1 |
Czech Republic
2019
| Strength | 125 T |
|---|---|
| CNC | cn |
| Folding length | 3200 mm |
|---|---|
| Engine Power | 7.5 kW |
Italy
2002
| Strength | 100 T |
|---|---|
| Distance between uprights | 3600 mm |
| Working speed | 8 mm/s |
| Engine Power | 11 kW |
| Folding length | 3000 mm |
|---|---|
| CNC | Delem DA 65 |
| Axis number | 4 |
| Hole | No |
Czech Republic
2007
| Strength | 35 T |
|---|---|
| CNC | Ermak |
| Folding length | 1250 mm |
|---|---|
| Engine Power | 5.5 kW |
Sweden
1998
| Strength | 110 T |
|---|---|
| Distance between uprights | 2560 mm |
| Vertical stroke | 150 mm |
| Axis number | 6 |
| Folding length | 3075 mm |
|---|---|
| CNC | |
| Working speed | 10 mm/s |
| Engine Power | 7.5 kW |
Germany
1980
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | 600 mm |
| Axis number | |
| Hole |
Netherlands
2000
| Strength | T |
|---|---|
| Distance between uprights | mm |
| Throat | mm |
| Working speed | mm/s |
| Engine Power | kW |
| Folding length | mm |
|---|---|
| CNC | |
| Vertical stroke | mm |
| Axis number | |
| Hole |
| Strength | 50 T |
|---|---|
| Distance between uprights | 2200 mm |
| Engine Power | 7 kW |
| Folding length | 2500 mm |
|---|---|
| CNC | MASTER TASK 3 ASSI |
| Hole | No |
| Strength | 50 T |
|---|---|
| Distance between uprights | 1850 mm |
| Axis number | 3 |
| Hole | No |
| Folding length | 2000 mm |
|---|---|
| CNC | MASTER 3 ASSI |
| Engine Power | 7 kW |