Contact us to receive an offer.
| Manufacturer | AJIAL |
|---|---|
| Model | 2414 |
| Year | |
| Location | Spain
|
This AJIAL 2414 press brake is a robust industrial machine designed for precise metal bending tasks. It features a bending force capacity of 240 tons and a bending length of 6050 mm, with a throat depth of 800 mm. The distance between uprights measures 5100 mm, accommodating sizeable workpieces. The machine offers an adjustable vertical stroke ranging from 7 mm up to 250 mm, controlled with a working speed of 7.5 mm per second. Additional speeds include an approach speed of 50 mm/sec and a reverse speed of 47 mm/sec. The press brake is powered by an engine delivering approximately 18.6 kW (25 hp) and weighs around 29,500 kg. Its overall footprint measures 6200 mm in length, 1690 mm in width, and 2950 mm in height.
Equipped with a CYBELEC CYBTOUCH 8 numerical control system operating on two axes (X and Y), the machine allows for precise and programmable bending operations. Pressure control is integrated within the CYBELEC system, and manual compensation is available via a compensation table. The machine includes a rear stop with a stroke of 1000 mm and is fitted with three arms for positioning at the rear stop. The matrix size is 112x112 mm. The press brake complies with CE standards.
From a physical standpoint, the machine presents a large blue and gray body with red safety mesh guards on both sides for operator protection. Safety signage is visible, indicating the requirement for gloves, boots, eye protection, and caution regarding electrical hazards. The control panel is mounted on an articulated arm on the right side, currently wrapped in protective plastic. An orange foot pedal control is positioned near the right side of the machine for operational convenience.
The machine shows signs of normal industrial wear, including scratches, surface rust, and dirt accumulation, particularly on the working area, frame, and work table painted yellow. There is visible debris around the machine and on the floor beneath it. Upper and lower bending tools are installed with guide rails and clamps; the clamp assembly has adjustment screws and locking levers. A red safety mesh guard was observed removed and resting near the machine. Metal parts and components are also present on a wooden pallet nearby.
This press brake is suitable for heavy-duty bending applications, offering substantial force and length capabilities, supported by CNC control for accuracy and repeatability. Prospective buyers should consider the noted surface wear and ensure suitability for their specific operational requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Bending force: 240 Tn
Bending length: 6050 mm
Distance between uprights: 5100 mm
Retracting force: 38 Tn
Adjustable stroke: 7-250 mm
Rear stop stroke: 1000 mm
Gooseneck: 800 mm
Table width: 240 mm
Distance table-traverse: 50 mm
Approach speed: 50 mm/sec
Working speed: 7.5 mm/sec
Reverse speed: 47 mm/sec
Engine power: 25 hp
Oil tank capacity: 400 l
Approx. machine weight: 29500 Kgs
Machine location: 6200x1690x2950 mm
Equipped with:
Numerical Control: CYBELEC CYBTOUCH 8 (2 axes - X,Y)
Compensation table: manual
Pressure control: from CYBELEC control
3 arms: at the rear stop
Matrix: 112x112 mm
CE standard: yes
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 63 |
| Last activity | Nov. 6, 2026 |
Bending force: 240 Tn
Bending length: 6050 mm
Distance between uprights: 5100 mm
Retracting force: 38 Tn
Adjustable stroke: 7-250 mm
Rear stop stroke: 1000 mm
Gooseneck: 800 mm
Table width: 240 mm
Distance table-traverse: 50 mm
Approach speed: 50 mm/sec
Working speed: 7.5 mm/sec
Reverse speed: 47 mm/sec
Engine power: 25 hp
Oil tank capacity: 400 l
Approx. machine weight: 29500 Kgs
Machine location: 6200x1690x2950 mm
Equipped with:
Numerical Control: CYBELEC CYBTOUCH 8 (2 axes - X,Y)
Compensation table: manual
Pressure control: from CYBELEC control
3 arms: at the rear stop
Matrix: 112x112 mm
CE standard: yes
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
This AJIAL 2414 press brake is a robust industrial machine designed for precise metal bending tasks. It features a bending force capacity of 240 tons and a bending length of 6050 mm, with a throat depth of 800 mm. The distance between uprights measures 5100 mm, accommodating sizeable workpieces. The machine offers an adjustable vertical stroke ranging from 7 mm up to 250 mm, controlled with a working speed of 7.5 mm per second. Additional speeds include an approach speed of 50 mm/sec and a reverse speed of 47 mm/sec. The press brake is powered by an engine delivering approximately 18.6 kW (25 hp) and weighs around 29,500 kg. Its overall footprint measures 6200 mm in length, 1690 mm in width, and 2950 mm in height.
Equipped with a CYBELEC CYBTOUCH 8 numerical control system operating on two axes (X and Y), the machine allows for precise and programmable bending operations. Pressure control is integrated within the CYBELEC system, and manual compensation is available via a compensation table. The machine includes a rear stop with a stroke of 1000 mm and is fitted with three arms for positioning at the rear stop. The matrix size is 112x112 mm. The press brake complies with CE standards.
From a physical standpoint, the machine presents a large blue and gray body with red safety mesh guards on both sides for operator protection. Safety signage is visible, indicating the requirement for gloves, boots, eye protection, and caution regarding electrical hazards. The control panel is mounted on an articulated arm on the right side, currently wrapped in protective plastic. An orange foot pedal control is positioned near the right side of the machine for operational convenience.
The machine shows signs of normal industrial wear, including scratches, surface rust, and dirt accumulation, particularly on the working area, frame, and work table painted yellow. There is visible debris around the machine and on the floor beneath it. Upper and lower bending tools are installed with guide rails and clamps; the clamp assembly has adjustment screws and locking levers. A red safety mesh guard was observed removed and resting near the machine. Metal parts and components are also present on a wooden pallet nearby.
This press brake is suitable for heavy-duty bending applications, offering substantial force and length capabilities, supported by CNC control for accuracy and repeatability. Prospective buyers should consider the noted surface wear and ensure suitability for their specific operational requirements.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2008 |
| Offers online | 63 |
| Last activity | Nov. 6, 2026 |
Прес спирачка cnc/nc AJIAL 2414
Ohraňovací lis cnc/nc AJIAL 2414
AJIAL 2414 Trykbremse cnc/nc
AJIAL 2414 Abkantpresse CNC/NC
Πατήστε φρένο cnc/nc AJIAL 2414
AJIAL 2414 Press brake cnc/nc
Prensa plegadora cnc/nc AJIAL 2414
Presse-plieuse à cnc/nc AJIAL 2414
Press kočnica cnc/nc AJIAL 2414
AJIAL 2414 Nyomja meg a cnc/nc féket
Pressa piegatrice cnc/nc AJIAL 2414
Paspauskite stabdį cnc/nc AJIAL 2414
AJIAL 2414 Kantbank cnc/nc
Prasa krawędziowa CNC/NC AJIAL 2414
Prensa freio cnc/nc AJIAL 2414
Presa frana cnc/nc AJIAL 2414
AJIAL 2414 Листогибочный пресс с ЧПУ
Pritisnite kočnicu cnc/nc AJIAL 2414
AJIAL 2414 Tryckbroms cnc/nc
Cnc / NC abkant pres AJIAL 2414
EN
- Languages
English (GB)