Contact us to receive an offer.
| Manufacturer | Agilent Bio Tek |
|---|---|
| Model | Synergy H1: SH1MG-SI |
| Year | 2025 |
| Location | Germany
|
Agilent BioTek Synergy H1 hybrid multimode microplate reader, model SH1MG-SI, CE-IVD version. Manufactured in 2025, with dimensions of 464.0 × 375.0 × 300.0 mm and a weight of 25.0 kg. The exterior appears intact, with no obvious visible damage. A laptop is shown connected to the reader; the listing states that a laptop with Gen5 IVD 3.16 software is included.
The seller reports that the reader was purchased for an ELISA workflow that was later moved to a cartridge-based platform, so it was never used for an assay. It was powered on for installation and training on 13 August 2025 and for a few short checks afterward. A Gen5 audit trail and Agilent installation report are available. The equipment is packed in its original packaging.
Features and specifications stated in the listing include monochromator absorbance from 230–999 nm; monochromator fluorescence with top and bottom reading from 250–700 nm and a fixed 16 nm bandwidth; full-light luminescence; time-resolved fluorescence; incubation up to 45 °C with four-zone control; and linear, orbital and double-orbital shaking. The instrument is gas-ready, with an Agilent CO2/O2 gas controller available as a later addition. It accommodates 6- to 384-well plates. Take3 micro-volume plates and injectors are optional additions. The listing also states a kinetic reading time of 11 seconds for 96 wells.
Included items are the Synergy H1 reader, original accessories and cables, laptop with Gen5 IVD 3.16 installed, instructions for use, installation report and original packaging. The reader is CE-IVD labelled for in vitro diagnostic use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Agilent BioTek Synergy H1 hybrid multimode microplate reader, CE-IVD version (). Manufactured in July 2025 and installed by Agilent in August 2025. We bought it for an ELISA workflow and then moved that work to a cartridge-based platform, so the reader never went into service.
Condition
• Never used for any assay. Powered on for installation and training (13 August 2025) and for a few short checks since. The Gen5 audit trail is available.
• Installed by Agilent service; installation report available.
• Already packed in its original packaging.
Specifications
• Absorbance: monochromator, 230–999 nm
• Fluorescence: monochromator, top and bottom reading, 250–700 nm, fixed 16 nm bandwidth
• Full-light luminescence and time-resolved fluorescence
• Incubation up to 45 °C (4-zone); linear, orbital and double-orbital shaking
• Gas-ready: an Agilent CO2/ O2 gas controller can be added later
• 6- to 384-well plates; Take3 micro-volume plates and injectors can be added later
• Kinetic reads: 96 wells in 11 s
• CE-IVD labelled (for in vitro diagnostic use); Gen5 IVD 3.16 software
Included
• Synergy H1 reader with original accessories and cables
• Laptop with Gen5 IVD 3.16 installed
• Instructions for use, installation report, original packaging
Price and terms
• (excluding Exapro commission). Offers considered.
• Collection in , or shipping at the buyer's cost. Viewing by appointment.
• Invoiced by YEARS GmbH and sold as used equipment between businesses. The buyer can book re-installation and an OQ with Agilent service.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Nov. 5, 2026 |
Agilent BioTek Synergy H1 hybrid multimode microplate reader, CE-IVD version (). Manufactured in July 2025 and installed by Agilent in August 2025. We bought it for an ELISA workflow and then moved that work to a cartridge-based platform, so the reader never went into service.
Condition
• Never used for any assay. Powered on for installation and training (13 August 2025) and for a few short checks since. The Gen5 audit trail is available.
• Installed by Agilent service; installation report available.
• Already packed in its original packaging.
Specifications
• Absorbance: monochromator, 230–999 nm
• Fluorescence: monochromator, top and bottom reading, 250–700 nm, fixed 16 nm bandwidth
• Full-light luminescence and time-resolved fluorescence
• Incubation up to 45 °C (4-zone); linear, orbital and double-orbital shaking
• Gas-ready: an Agilent CO2/ O2 gas controller can be added later
• 6- to 384-well plates; Take3 micro-volume plates and injectors can be added later
• Kinetic reads: 96 wells in 11 s
• CE-IVD labelled (for in vitro diagnostic use); Gen5 IVD 3.16 software
Included
• Synergy H1 reader with original accessories and cables
• Laptop with Gen5 IVD 3.16 installed
• Instructions for use, installation report, original packaging
Price and terms
• (excluding Exapro commission). Offers considered.
• Collection in , or shipping at the buyer's cost. Viewing by appointment.
• Invoiced by YEARS GmbH and sold as used equipment between businesses. The buyer can book re-installation and an OQ with Agilent service.
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
Agilent BioTek Synergy H1 hybrid multimode microplate reader, model SH1MG-SI, CE-IVD version. Manufactured in 2025, with dimensions of 464.0 × 375.0 × 300.0 mm and a weight of 25.0 kg. The exterior appears intact, with no obvious visible damage. A laptop is shown connected to the reader; the listing states that a laptop with Gen5 IVD 3.16 software is included.
The seller reports that the reader was purchased for an ELISA workflow that was later moved to a cartridge-based platform, so it was never used for an assay. It was powered on for installation and training on 13 August 2025 and for a few short checks afterward. A Gen5 audit trail and Agilent installation report are available. The equipment is packed in its original packaging.
Features and specifications stated in the listing include monochromator absorbance from 230–999 nm; monochromator fluorescence with top and bottom reading from 250–700 nm and a fixed 16 nm bandwidth; full-light luminescence; time-resolved fluorescence; incubation up to 45 °C with four-zone control; and linear, orbital and double-orbital shaking. The instrument is gas-ready, with an Agilent CO2/O2 gas controller available as a later addition. It accommodates 6- to 384-well plates. Take3 micro-volume plates and injectors are optional additions. The listing also states a kinetic reading time of 11 seconds for 96 wells.
Included items are the Synergy H1 reader, original accessories and cables, laptop with Gen5 IVD 3.16 installed, instructions for use, installation report and original packaging. The reader is CE-IVD labelled for in vitro diagnostic use.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – small or medium company |
| Active since | 2026 |
| Offers online | 2 |
| Last activity | Nov. 5, 2026 |
Спектрометър Agilent Bio Tek Synergy H1: SH1MG-SI
Spektrometr Agilent Bio Tek Synergy H1: SH1MG-SI
Agilent Bio Tek Synergy H1: SH1MG-SI Spektrometer
Agilent Bio Tek Synergy H1: SH1MG-SI Spektrometer
Φασματομέτρο Agilent Bio Tek Synergy H1: SH1MG-SI
Agilent Bio Tek Synergy H1: SH1MG-SI Spectrometer
Espectrómetro Agilent Bio Tek Synergy H1: SH1MG-SI
Spectromètre Agilent Bio Tek Synergy H1: SH1MG-SI
Spektrometar Agilent Bio Tek Synergy H1: SH1MG-SI
Agilent Bio Tek Synergy H1: SH1MG-SI Spektrométer
Spettrometro Agilent Bio Tek Synergy H1: SH1MG-SI
Agilent Bio Tek Synergy H1: SH1MG-SI Spektrometras
Agilent Bio Tek Synergy H1: SH1MG-SI Spectrometer
Spektrometr Agilent Bio Tek Synergy H1: SH1MG-SI
Espectrómetro Agilent Bio Tek Synergy H1: SH1MG-SI
Spectrometru Agilent Bio Tek Synergy H1: SH1MG-SI
Agilent Bio Tek Synergy H1: SH1MG-SI Спектрометр
Spektrometar Agilent Bio Tek Synergy H1: SH1MG-SI
Agilent Bio Tek Synergy H1: SH1MG-SI Spektrometer
Spektrometre Agilent Bio Tek Synergy H1: SH1MG-SI
EN
- Languages
English (GB)