| Manufacturer | AgieCharmilles |
|---|---|
| Model | Agiecut Classic V3 |
| Year | 2007 |
| Location | South Korea
|
The AgieCharmilles Agiecut Classic V3 is a wire EDM (Electrical Discharge Machining) machine manufactured in 2007 by AgieCharmilles. This machine has a robust build with overall dimensions measuring 1940 mm in length, 2300 mm in width, and 2600 mm in height, and it weighs approximately 3460 kg. It is designed to handle workpieces with maximum dimensions of 1050 mm in length, 650 mm in width, and 420 mm in height, supporting workpiece weights ranging from 400 kg up to 800 kg.
The machine offers precise axis movements with an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. Additionally, it features U and V axis movements of ±70 mm each, allowing for enhanced flexibility in machining complex shapes. The taper angle capability is ±30° with a taper height of 100 mm. The dielectric fluid volume is 1000 liters, which is essential for the EDM process.
Standard wire diameters available for this machine range from 0.15 mm to 0.33 mm, with optional wire diameters available between 0.07 mm and 0.10 mm. The machine can achieve a surface finish quality down to 0.2 µm.
The machine includes a main cutting chamber labeled "AGIE AGIECUT CLASSIC" and is equipped with a control panel featuring a keyboard, mouse, and screen located on the right side for operational control. The exterior panels are primarily white and yellow with ventilation holes, and the machine shows minor surface marks but no visible damage, indicating it has been well maintained. Cables and hoses are connected at the rear side, consistent with typical installation requirements.
This AgieCharmilles Agiecut Classic V3 offers a solid combination of precision, flexibility, and capacity for wire EDM machining tasks. For further details or inquiries, please contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
This AgieCharmilles Agiecut Classic V3 was manufactured in 2007. A wire EDM machine, it features dimensions of 1940 × 2300 × 2600 mm and a total weight of 3460 kg. It supports workpiece dimensions up to 1050 × 650 × 420 mm and a maximum weight of 800 kg. The machine offers a taper angle up to ±30° and a dielectric volume of 1000 liters. Contact us for more information about this machine.
Measurements width: 2300 mm
Measurements depth: 1940 mm
Measurements height: 2600 mm
Machine weight: 3460 kg
X-Axis Movement: 500 mm
Y-Axis Movement: 350 mm
Z-Axis Movement: 426 mm
V-Axis Movement: ±70 mm
U-Axis Movement: ±70 mm
Workpiece weight: 400/800 kg
Taper angle/height: ±30°/100 mm
Workpiece dimensions (lxwxh): 1050 × 650 × 420 mm
Volume of dielectric: 1000 liters
Available wire diameters (standard): 0. 33 – 0. 15 mm
Available wire diameters (optional): 0. 10 – 0. 07 mm
Best surface finish (standard): 0. 2 μmMachine still under power
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 1, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
This AgieCharmilles Agiecut Classic V3 was manufactured in 2007. A wire EDM machine, it features dimensions of 1940 × 2300 × 2600 mm and a total weight of 3460 kg. It supports workpiece dimensions up to 1050 × 650 × 420 mm and a maximum weight of 800 kg. The machine offers a taper angle up to ±30° and a dielectric volume of 1000 liters. Contact us for more information about this machine.
Measurements width: 2300 mm
Measurements depth: 1940 mm
Measurements height: 2600 mm
Machine weight: 3460 kg
X-Axis Movement: 500 mm
Y-Axis Movement: 350 mm
Z-Axis Movement: 426 mm
V-Axis Movement: ±70 mm
U-Axis Movement: ±70 mm
Workpiece weight: 400/800 kg
Taper angle/height: ±30°/100 mm
Workpiece dimensions (lxwxh): 1050 × 650 × 420 mm
Volume of dielectric: 1000 liters
Available wire diameters (standard): 0. 33 – 0. 15 mm
Available wire diameters (optional): 0. 10 – 0. 07 mm
Best surface finish (standard): 0. 2 μmMachine still under power
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
The AgieCharmilles Agiecut Classic V3 is a wire EDM (Electrical Discharge Machining) machine manufactured in 2007 by AgieCharmilles. This machine has a robust build with overall dimensions measuring 1940 mm in length, 2300 mm in width, and 2600 mm in height, and it weighs approximately 3460 kg. It is designed to handle workpieces with maximum dimensions of 1050 mm in length, 650 mm in width, and 420 mm in height, supporting workpiece weights ranging from 400 kg up to 800 kg.
The machine offers precise axis movements with an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 426 mm. Additionally, it features U and V axis movements of ±70 mm each, allowing for enhanced flexibility in machining complex shapes. The taper angle capability is ±30° with a taper height of 100 mm. The dielectric fluid volume is 1000 liters, which is essential for the EDM process.
Standard wire diameters available for this machine range from 0.15 mm to 0.33 mm, with optional wire diameters available between 0.07 mm and 0.10 mm. The machine can achieve a surface finish quality down to 0.2 µm.
The machine includes a main cutting chamber labeled "AGIE AGIECUT CLASSIC" and is equipped with a control panel featuring a keyboard, mouse, and screen located on the right side for operational control. The exterior panels are primarily white and yellow with ventilation holes, and the machine shows minor surface marks but no visible damage, indicating it has been well maintained. Cables and hoses are connected at the rear side, consistent with typical installation requirements.
This AgieCharmilles Agiecut Classic V3 offers a solid combination of precision, flexibility, and capacity for wire EDM machining tasks. For further details or inquiries, please contact us.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2019 |
| Offers online | 2045 |
| Last activity | Nov. 1, 2026 |
GINDUMAC GmbH is a dynamic German company specializing in the global trade of used industrial machinery. Our international team of more than 30 employees supports manufacturers worldwide in buying and selling high-quality used equipment across sectors such as metalworking, sheet metal, plastics, woodworking, and automation.
Through a data-driven, digital approach, the company delivers accurate machine valuations, professional inspections, and end-to-end transaction management — ensuring a transparent, secure, and efficient sales process for both buyers and sellers.
Едм машина за рязане на тел AgieCharmilles Agiecut Classic V3
Elektroerozivní drátová řezačka AgieCharmilles Agiecut Classic V3
AgieCharmilles Agiecut Classic V3 Trådskære edm maskine
AgieCharmilles Agiecut Classic V3 Drahterodiermaschine
Μηχάνημα κοπής συρμάτων edm AgieCharmilles Agiecut Classic V3
AgieCharmilles Agiecut Classic V3 Wire cutting edm machine
Máquina de electroerosión por hilo AgieCharmilles Agiecut Classic V3
Machine d'électro-érosion par fil AgieCharmilles Agiecut Classic V3
EDM stroj za rezanje žice AgieCharmilles Agiecut Classic V3
AgieCharmilles Agiecut Classic V3 Huzalvágó edm gép
Elettroerosione a filo AgieCharmilles Agiecut Classic V3
Vielos pjovimo edm mašina AgieCharmilles Agiecut Classic V3
AgieCharmilles Agiecut Classic V3 Draadsnij-edm-machine
Wycinarka drutowa AgieCharmilles Agiecut Classic V3
Máquina edm para corte de fio AgieCharmilles Agiecut Classic V3
Mașină de tăiat cu sârmă EDM AgieCharmilles Agiecut Classic V3
AgieCharmilles Agiecut Classic V3 Электроэрозионный вырезной станок
EDM mašina za sečenje žice AgieCharmilles Agiecut Classic V3
AgieCharmilles Agiecut Classic V3 Trådskärning edm maskin
Tel erozyon makinesi AgieCharmilles Agiecut Classic V3
EN
- Languages
English (GB)