| Manufacturer | AESUS |
|---|---|
| Model | ECO SHRINK |
| Year | |
| Location | USA
|
AESUS ECO SHRINK neck bander for shrink-film application. The machine has a tall, upright configuration with a stainless-steel frame mounted on two long floor supports. A film feed and forming assembly is positioned above the main body, with clear plastic film routed through it. The front control panel includes a display and several pushbuttons, including a red emergency-stop button. A transparent guarded enclosure is positioned to the left of the control panel. Motor and roller assemblies, hoses, and cables are also present along the upper and right sides of the machine.
The stated output is up to 80 units per minute. The maximum foil width is 175 mm, the cut length is up to 280 mm, and the container height range is up to 300 mm. The listed band thickness range is 1.0–3.0 mil. The film roll specification states a core range of 125–150 mm and a maximum roll outside diameter of 300 mm (12 inches).
The stated air supply requirement is 80 PSI. Electrical details listed for the machine are single-phase, 60 cycles, 120 volts. Listed construction materials include stainless steel, anodized aluminum, and high-density polyethylene. This description does not establish the machine’s operating condition or performance beyond the specifications provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
neck banders
Aesus Model ECO SHRINK Bander
- Speed: Up to 80/minute
- Layflat Range: Up to 175mm
- Band Thickness Range: 1.0-3.0 mil
- Cut Length: Up to 280mm
- Material Roll: Core: 125mm-150mm
- Roll: 300mm OD (12”)
- Container Height Range: Up to 300mm (12”)
- Air Supply Requirements: 80 PSI
- Machine Components: Stainless steel, anodized aluminum, high density
polyethylene
- 1 phase, 60 cycles, 120 volts
-
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 72 |
| Last activity | Oct. 29, 2026 |
neck banders
Aesus Model ECO SHRINK Bander
- Speed: Up to 80/minute
- Layflat Range: Up to 175mm
- Band Thickness Range: 1.0-3.0 mil
- Cut Length: Up to 280mm
- Material Roll: Core: 125mm-150mm
- Roll: 300mm OD (12”)
- Container Height Range: Up to 300mm (12”)
- Air Supply Requirements: 80 PSI
- Machine Components: Stainless steel, anodized aluminum, high density
polyethylene
- 1 phase, 60 cycles, 120 volts
-
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
AESUS ECO SHRINK neck bander for shrink-film application. The machine has a tall, upright configuration with a stainless-steel frame mounted on two long floor supports. A film feed and forming assembly is positioned above the main body, with clear plastic film routed through it. The front control panel includes a display and several pushbuttons, including a red emergency-stop button. A transparent guarded enclosure is positioned to the left of the control panel. Motor and roller assemblies, hoses, and cables are also present along the upper and right sides of the machine.
The stated output is up to 80 units per minute. The maximum foil width is 175 mm, the cut length is up to 280 mm, and the container height range is up to 300 mm. The listed band thickness range is 1.0–3.0 mil. The film roll specification states a core range of 125–150 mm and a maximum roll outside diameter of 300 mm (12 inches).
The stated air supply requirement is 80 PSI. Electrical details listed for the machine are single-phase, 60 cycles, 120 volts. Listed construction materials include stainless steel, anodized aluminum, and high-density polyethylene. This description does not establish the machine’s operating condition or performance beyond the specifications provided.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2011 |
| Offers online | 72 |
| Last activity | Oct. 29, 2026 |
Машина за термосвиваемо опаковане AESUS ECO SHRINK
Smršťovací balicí stroj AESUS ECO SHRINK
AESUS ECO SHRINK Krympefoliemaskine
AESUS ECO SHRINK Schrumpfverpackungsmaschine
Μηχανή θερμοσυρρίκνωσης AESUS ECO SHRINK
AESUS ECO SHRINK Shrink wrapping machine
Máquina de retractilado AESUS ECO SHRINK
Machine de suremballage sous film rétractable AESUS ECO SHRINK
Stroj za termo-skupljajuće pakiranje AESUS ECO SHRINK
AESUS ECO SHRINK Zsugorfóliázó gép
Macchina confezionatrice termoretraibile AESUS ECO SHRINK
AESUS ECO SHRINK Termosusitraukiančios plėvelės pakavimo mašina
AESUS ECO SHRINK Krimpverpakkingsmachine
Maszyna do pakowania w folię termokurczliwą AESUS ECO SHRINK
Máquina de embalagem termoencolhível AESUS ECO SHRINK
Mașină de ambalat prin termo-contractare AESUS ECO SHRINK
AESUS ECO SHRINK Термоусадочная упаковочная машина
Mašina za termo-skupljajuće pakovanje AESUS ECO SHRINK
AESUS ECO SHRINK Krympförpackningsmaskin
Shrink ambalaj makinesi AESUS ECO SHRINK
EN
- Languages
English (GB)