Contact us to receive an offer.
| Manufacturer | ADOLF ILLIG |
|---|---|
| Model | UA 200/1g |
| Year | 1999 |
| Location | Hungary
|
| Category | Thermoforming - Sheet-fed thermoformers |
| Max sheet width | 1000 mm |
| Forming depth | 600 mm |
| Engine Power | 105 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Adolf Illig UA 200/1g |
| Last availability date | 02/11/2026 |
| Product id | P260902600 |
| Language |
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
Thermoforming machine ADOLF ILLIG UA 200/1g | 1999
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
|
ADOLF ILLIG UA 200/1g thermoforming machine, manufactured in 1999. The machine is listed as used and is offered on an as-is, where-is basis. Its stated application is the production of door liners. The description identifies it as a servo-driven thermoforming machine intended primarily for sheet-fed plastic processing.
Forming and material specifications:
- Maximum forming area: 1,960 × 960 mm
- Minimum mould dimensions: 860 × 720 mm
- Maximum draw depth: 600 mm, positive or negative
- Maximum material width: 1,000 mm
- Maximum roll material thickness: 2.0–2.5 mm; the machine was previously used with material 1.0–1.5 mm thick
- Maximum sheet material thickness: 10–12 mm
- Maximum roll diameter: 1,200 mm
Heating capacity is stated as 87.2 kW, with a total connected load of approximately 105 kW, depending on configuration. The specified power supply is 3 × 380–400 V at 50 Hz. Stated operating pressure is 6–10 bar, and vacuum pump capacity is listed as 100–160 m³/h.
The control system is described as a proprietary ILLIG PLC, with stated indexing accuracy of ±0.2 mm. The listing quantity is one machine. Delivery terms are EXW under Incoterms 2020. No additional accessories or included equipment are specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
Type: Thermoforming machine
Manufacturer: ADOLF ILLIG
Model: UA 200/1g
Year of manufacture: 1999
Condition: Used; sold as-is, where-is
Quantity: 1
Application: Production of door liners
Machine description: High-precision, servo-driven thermoforming machine designed primarily for sheet-fed plastic processing
Maximum forming area: 1,960 × 960 mm
Minimum mould dimensions: 860 × 720 mm
Maximum draw depth: 600 mm, positive or negative
Maximum material width: 1,000 mm
Maximum material thickness, roll: 2.0–2.5 mm; previously used with 1.0–1.5 mm material
Maximum material thickness, sheet: 10–12 mm
Maximum roll diameter: 1,200 mm
Total heating capacity: 87.2 kW
Total connected load: Approximately 105 kW, depending on configuration
Power supply: 3 × 380–400 V, 50 Hz
Operating pressure: 6–10 bar
Vacuum pump capacity: 100–160 m³/h
Control system: Proprietary ILLIG PLC
Indexing accuracy: ±0.2 mm
Asset location: Jasbereny, Hungary
Delivery terms: EXW, Incoterms 2020
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 180 |
| Last activity | Nov. 4, 2026 |
Type: Thermoforming machine
Manufacturer: ADOLF ILLIG
Model: UA 200/1g
Year of manufacture: 1999
Condition: Used; sold as-is, where-is
Quantity: 1
Application: Production of door liners
Machine description: High-precision, servo-driven thermoforming machine designed primarily for sheet-fed plastic processing
Maximum forming area: 1,960 × 960 mm
Minimum mould dimensions: 860 × 720 mm
Maximum draw depth: 600 mm, positive or negative
Maximum material width: 1,000 mm
Maximum material thickness, roll: 2.0–2.5 mm; previously used with 1.0–1.5 mm material
Maximum material thickness, sheet: 10–12 mm
Maximum roll diameter: 1,200 mm
Total heating capacity: 87.2 kW
Total connected load: Approximately 105 kW, depending on configuration
Power supply: 3 × 380–400 V, 50 Hz
Operating pressure: 6–10 bar
Vacuum pump capacity: 100–160 m³/h
Control system: Proprietary ILLIG PLC
Indexing accuracy: ±0.2 mm
Asset location: Jasbereny, Hungary
Delivery terms: EXW, Incoterms 2020
Please note that this description may have been translated or optimized with artificial intelligence (AI) automatically. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase.
| Category | Thermoforming - Sheet-fed thermoformers |
| Max sheet width | 1000 mm |
| Forming depth | 600 mm |
| Engine Power | 105 kW |
| worked hours | |
| hours under power | |
| state | as-is, where-is |
| At local norms | --------- |
| status | |
| Datasheet | Adolf Illig UA 200/1g |
| Last availability date | 02/11/2026 |
| Product id | P260902600 |
| Language |
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
Thermoforming machine ADOLF ILLIG UA 200/1g | 1999
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
ADOLF ILLIG UA 200/1g
|
ADOLF ILLIG UA 200/1g thermoforming machine, manufactured in 1999. The machine is listed as used and is offered on an as-is, where-is basis. Its stated application is the production of door liners. The description identifies it as a servo-driven thermoforming machine intended primarily for sheet-fed plastic processing.
Forming and material specifications:
- Maximum forming area: 1,960 × 960 mm
- Minimum mould dimensions: 860 × 720 mm
- Maximum draw depth: 600 mm, positive or negative
- Maximum material width: 1,000 mm
- Maximum roll material thickness: 2.0–2.5 mm; the machine was previously used with material 1.0–1.5 mm thick
- Maximum sheet material thickness: 10–12 mm
- Maximum roll diameter: 1,200 mm
Heating capacity is stated as 87.2 kW, with a total connected load of approximately 105 kW, depending on configuration. The specified power supply is 3 × 380–400 V at 50 Hz. Stated operating pressure is 6–10 bar, and vacuum pump capacity is listed as 100–160 m³/h.
The control system is described as a proprietary ILLIG PLC, with stated indexing accuracy of ±0.2 mm. The listing quantity is one machine. Delivery terms are EXW under Incoterms 2020. No additional accessories or included equipment are specified.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Machinery dealer |
| Active since | 2023 |
| Offers online | 180 |
| Last activity | Nov. 4, 2026 |
| Max sheet length | 3000 mm |
|---|---|
| Engine Power | 245 kW |
| Max sheet width | 3000 mm |
|---|
Italy
1997
France
2005
| Max sheet length | 3000 mm |
|---|---|
| Forming depth | 800 mm |
| Max sheet width | 2000 mm |
|---|---|
| Engine Power | 240 kW |
| Max sheet length | 1500 mm |
|---|---|
| Forming depth | 500 mm |
| Max sheet width | 1000 mm |
|---|---|
| Engine Power | 61 kW |
| Max sheet length | 520 mm |
|---|---|
| Forming depth | 100 mm |
| Max sheet width | 580 mm |
|---|---|
| Engine Power | 21 kW |
| Max sheet length | 2310 mm |
|---|---|
| Forming depth | 10 mm |
| Max sheet width | 1360 mm |
|---|---|
| Engine Power | 76 kW |
| Max sheet length | 1650 mm |
|---|---|
| Forming depth | 600 mm |
| Max sheet width | 1500 mm |
|---|---|
| Engine Power | 115.5 kW |
| Max sheet length | 350 mm |
|---|---|
| Forming depth | 0.2 mm |
| Max sheet width | 300 mm |
|---|---|
| Engine Power | 4.8 kW |
Bulgaria
2023
| Max sheet length | 1300 mm |
|---|---|
| Forming depth | 200 mm |
| Max sheet width | 750 mm |
|---|---|
| Engine Power | 40 kW |
| Max sheet length | 2020 mm |
|---|---|
| Engine Power | 304 kW |
| Max sheet width | 990 mm |
|---|
Germany
2015
| Max sheet length | -4 mm |
|---|
Hungary
2021
| Max sheet length | 600 mm |
|---|---|
| Forming depth | 600 mm |
| Max sheet width | 450 mm |
|---|---|
| Engine Power | 3 kW |
Slovakia
2021
United Kingdom
2010
| Max sheet length | 2960 mm |
|---|---|
| Forming depth | 1000 mm |
| Max sheet width | 2010 mm |
|---|---|
| Engine Power | 96 kW |
Italy
2003
Hungary
2014
| Max sheet length | 2000 mm |
|---|---|
| Forming depth | 200 mm |
| Max sheet width | 800 mm |
|---|---|
| Engine Power | 264 kW |
Hungary
2007
| Max sheet length | 2090 mm |
|---|---|
| Forming depth | 550 mm |
| Max sheet width | 960 mm |
|---|---|
| Engine Power | 375 kW |
| Max sheet length | 2290 mm |
|---|---|
| Forming depth | 600 mm |
| Max sheet width | 960 mm |
|---|---|
| Engine Power | 269 kW |
United Kingdom
1995
| Max sheet length | 2000 mm |
|---|
| Max sheet width | 1000 mm |
|---|
Hungary
1993
| Engine Power | 399 kW |
|---|
United Kingdom
1998
| Max sheet length | 2600 mm |
|---|---|
| Forming depth | 1200 mm |
| Max sheet width | 1750 mm |
|---|---|
| Engine Power | 55 kW |
United Kingdom
2000
| Max sheet length | 780 mm |
|---|---|
| Forming depth | 120 mm |
| Max sheet width | 530 mm |
|---|
United Kingdom
1997
| Max sheet length | 2600 mm |
|---|---|
| Engine Power | 55 kW |
| Max sheet width | 1750 mm |
|---|
| Max sheet length | 1800 mm |
|---|---|
| Forming depth | 650 mm |
| Max sheet width | 2000 mm |
|---|
Poland
Romania
Spain
EN
- Languages
English (GB)