You have the same machine to sell?

Add it to our catalogue for FREE

Start selling

About this seller

Client type End user
Active since 2020
Offers online 10
Last activity May 8, 2020

Specifications

Length between centers1000.0 mm
Center height
Turning length1000.0 mm
Turning Ø600.0 mm
Ø above the bed450.0 mm
Ø above transversing slide250.0 mm
Diameter in the gap600.0 mm
Max workpiece weight
Spindle nose
Spindle bore
Turning speed
Spindle motor power8.9 kW
Overhauledyes
Year of overhauling
-------------------
Length x width x height - × - × -
Weight -
Worked hours
Hours under power
State good
At local norms yes
Status under power

Description

Lot-2 /.- Lathes, accessories, tools (Universal)

 2- Zubal 1m lathe between points, characteristics and equipment: It is equipped with a 12 HP motor provided with an electromagnetic clutch-brake, tempered benches and in good condition. It is equipped with a fee display on its 2 cars. It has a TDG- Ø250 plate with 2 keys and these sets of claws: 2-Hard exterior + 1-Hard interior + 6 sets of soft claws for Ø from 55 to 300mm (Interior and exterior). It is equipped with Impero quick change turrets, with all its tools and accessories. Sprockets for all types of threads, offset star wrenches: 1 = 20/1 = 15 mm. Plus the following special equipment:

2.1- Special equipment and accessories: A hydraulic power plant with a precision U-250 / A-TDG hydraulic chuck, equipped with 10 sets of quick centering claws for different diameters. A special Ø49x Ø40x 847 tube for this dish.
** 2.1.1- Another hydraulic power plant with a complete copying equipment, installable on this lathe.
 2.2- Impero turret tools: 1- Morse cone turret nº 5 / 1- Morse nº4 for CM4-T-16 turret / 1-Morse nº3 for CM3-T-16 turret / 2-Chuck holder turrets with Ø32 / 1- Chuck holder die, Tool holder. Ø22- T.18-T8 / 1-Chuck holder socket, Tool holder. Ø16 BU-T.16-7 / 1- Chuck holder, tool holder. Ø12-T-16-7.5 / 1-Chuck holder socket, Tool holder. Ø10-BU.T16-4.
2-Turrets for adjustable anvil Ø18.SO3.D18 / 2-Turrets for universal tool holders.
               
2.2.1- Internal tool holder (Cylinder and thread):
1-Chuck Ø22x 208 Tool holder. Ø12 Impero /
1-Chuck Ø16x 208 Tool holder. Ø7 Impero / 1-Chuck Ø10x 168 Tool holder. Ø5 Impero / 1- Chuck Ø32x 440 + given support Impero / 1-Chuck Ø18x 140 for Tools. (10mm Squares) / 1- Chuck Ø12x 210 for Tools. (6mm x 45º and 9º squares) / 3-Tool holder chucks. Ø 6 of (Ø18x 18 + Ø25x 50 + Ø10x 25 for adjustable support) / 1- Chuck Ø 32x 350 (S32U-CTFPR-16 Impero) for triangular plate.
Square Tool Holder: 1-Chuck 20x20x200 with 8th Tool: 14x14 / 1-Chuck 20x20x 255-Tool: 10x 10x90º / 1-Chuck 20x20x165-Tool: 10x10x 35º / 1-Chuck Ø27x135-Tool: 10x10x90º / 1- Ø27x156-Tool: 14x14x90º.
                                                                                                 
2.2.2- Impero tools for internal mandrel drilling in MD: 2- Ø4- Ref: A3T-04-M3 / 2- Ø4- Ref: C3T-04-M3 / 3- Ø4-Ref: C5-M3 / 1- Ø4- Ref: A3-M3 / 1- Ø4-Ref: C3-M3 / 1- Ø4-REf: C5-U / 2- Ø5-Ref: AT3-05-M3 / 2- Ø5-Ref: A3-M3 / 4- Ø5-Ref: C5-U / 3- Ø7-Ref: A3-M3 / 1- Ø7x 3,4 (slot) / 5- Ø7x (various) / 2- Ø8-Ref: C5-08-P5 / 8- Ø8 - Ref: C5-08-M3 / 3- Ø8-Ref: A3-M3 / 1- Ø8-REf: C5-U / 6- Ø12-Ref: A3-M3 / 5- Ø12-C5-M3.
Tools. MD Impero, adjustable anvil Ø18 with chip breaker: 5 = 12x 10.5x 40 Ref: DZ3-P5 + 2-R. Chip.

2.2.3- Other adjustable anvils Impero MD: 1-Anvil FB-16 / SS2 / 1- Anvil FB-18 / K3-K05 / 8- With internal spokes and Ø16 and Ø18mm handles / 5- With external spokes and Ø16 and Ø18mm / 11- Ø16 pointed plates / 8- Ø18 pointed plates / 2- Ø18 for grooves / 1- Ø18- Tool. 12x10,5 with chip breaker / 1- Tool Holder. Ø10 adjustable on anvil Ø18-MF / T.18 / 1- Tool Holder. Ø10 adjustable, anvil MF / T.16 / 5- Anvils Ø16 and Ø18 with CO-8% tool.

2.2.4- MD Plates: 4- Sean 1203 AFTN (P-25) / 3- Ref: 5K 30 (4mm bucking) / 2- Ref: PT4NT (Bucking-4).
 Note: There are various used plates with usable cuts, and accessories for the plate holders.

2.3 - MD tools with square handle: 2 = 10x10 cylinder plate 90º D / 3 = 10x10 cylinder plate 90º IZ / 1 = 10x10 x 60º thread / 1 = 12x12 Ref: TPMR-15 BO1 / 1 = 12x12x 95x 55º thread / 2 = 12x12x76 / 48 tip / 1 = 12x12 right / 2 = 14x14x50 tip / 1 = 17x17 right / 3 = 20x20x115 P-Iz / 1 = 20x20x95 P-Iz / 5 = 20x20x 155/80 tip / 1 = 20x20x140 angled 90º D / 2 = 20x20 tip / 1 = 20x20 in radius / 1 = 20x20- Ref: B8-1806L 2020E8 IZ / 1 = REf: 370 180.51 20.20 7C-IZ / 1 = 20x20-SO.6MK 10 C4440 D + Ø16 anvil / 1 = REf: 1506 S20 IZ / 3 = 20x20-D / 1 = 20x20-4975 HI tip / 1 = 22x22 radius / 1 = 25x25- 4971 HB1 / 1 = 25x16- A34 MK 10 pulley / 1 = 25x16-09-211-A1 pulley / 2 = M-3 4104-L-16 IZ Imp. / 1 ​​= LUD 18/22 Imp.
2.3.1- Internal mandrel tools MD: 1 = 20x20x140- 353 H10 / 1 = 16x16x130- ISD 9-920.
2.3.2- MD Parting Tools: 1 = 25x25 / 1 = 20x20 / 1 = 32x20- 370 190-7R 3220 7C (Carboloy).

2.4 - Tool holder for parting with MD plates: 1 = 25x25 / 1 = Bohlerit-KHST-02-KN 324/1 = Coromant-150.2-25-4º / 1 = Tool Holder: IH 32-4 Sándvik + 1-Knife 150- 2-2520-25 / 1 = T-MAX-A2-568-Blade holder-Coromant / 1 = Tool Holder. Record: For 10x 3mm (cobalt) cutting blade.

2.5- Tool holder for MD plates: 1 = REf: TPGNR-2525 M 22- negative / 1 = Ref: TPFNR-2525 M 22-negative / 1 = 25x25-EE32R44-4 Rhombus positive-D / 1 = SCLCR 2525M 12 Rhombus positive-D / 1 = 25x25- SP 2525 R / 1 = 25x25 Sandvik A4-4555 Rhombus / 1 = PAPR-16-3 R17152525M5-16 Sandvik-D (With chip breaker plate) 1 = PAPR-16-3 L 1715- 2520 M-10 Sandvik-IZ (With chip breaking plate).
2.5.1- Tool Holder. of Co-8%: 1 = Vallcia PAT-nº 3 = 10x10 / 1 = Record nº 10-D = 10x10.
                                                                                                 
2.6 - Tools Impero Cobalt 8% (Threading and grooving-R): 3- Ø4- Ref: B2 / 6-04-222-S / 60º / 1- Ø4x 2R / 1- Ø4x 1,8R / 1- Ø4 cylinder / 3- Ø5x 60º / 1- Ø5x 4,70R / 1- Ø5x 2R / 2- Ø5x 1,50R / 1- Ø5x 1,35R / 1- Ø5x 1R / 1- Ø5x radio-2 / 3- Ø5x radio-1, 5 / 1- Ø5x 62 / 1- Ø6x 60º / 2- Ø7x 3,70R / 1- Ø 7x 3,5R / 1- Ø7x 1,77R / 2- Ø7x 1,15R / 4- Ø7x 60º / 2- Ø7x 60º straight / 1- Ø8x 2.47R + 60º tap / 1- Ø8x 55 / 2- Ø8x 1R / 1-Ø8x1.5 radio + Ø3 cut / 1- Ø8x 1.75R + 2.10R / 1- Ø8x 1.90R + 2R / 1- Ø8x 1,90R / 2- Ø8x 2,30R / 1- Ø8x 1,60R / 2- Ø8x 1,50R / 1- Ø8x 1,25R / 1- Ø8x 1,3 radius / 1- Ø8x 1 radius / 1- Ø8x 1,5 radius / 1- Ø8x 2 radius / 1- Ø8x 2,5 radius / 5- Ø8 x 60º / 1- Ø8x 55º / 3- Ø8 without shape / 1- Ø12x 2,25R / 4- Ø12 without form / 1- Ø12x 55º / 1- Ø12x 2,9R + 4 radius / 1- Ø12x 1,2 radius / 1- Ø12x 4 radius / 1- Ø12x 90º cylinder / 2- Ø12x 60º / 1- Ø12 x 2,90R / 1- Ø12x 3.30R + 5.85R / 1- Ø12x 1.80 radius / 1 - Ø12x 1,70R / 1- Ø12x 2 radius 1-Ø12x10,2 + 55º / ** 1- Ø14x 86 / 1- Ø14x 74 / 1- Ø14x 69 / 1- Ø14x 58 / 1- Ø15x 90/8 - Ø12x50 / 40 / 11- Ø10x50 / 40 / 7- Ø8x30-40 / 7- Ø6x 50-30.

2.7 - 8% cobalt tools in squares: 1 = 6x6x68 / 1 = 6x6x27x32º / 1 = 8x8x150x28ºx4 radius / 1 = 8x8x148 with 3 radius / 1 = 8x8x 50º and 45º / 1 = 8x8x Ø5 / 1 = 8x8x 5R-tronzar / 1 = 8x8x70 / 1 = 8x8x 68x 1,30R / 1 = 8x8x 85x 2,2R + 5,9R / 2 = 10x10x 50/1 = 10x10x 90x 1,4R at 90º + 7,6R / 1 = 10x10x 97x 3,1R + 4R / 1 = 10x10x 92x 1,5R + 2,3R at 90º / 1 = 10x10x 76x 40º + 3,25 radius / 1 = 10x10x 70x 5 radius + cylinder /
** 36 = 10x10x 50-30 / 3 = 12x12x 50-30 / / 1 = 8x8x 100/2 = 6x6x 80/3 = 20x20x 62-50 / 1 = 16x16x 78/3 = 14x14x 58-50 / 1 = 12x12x 42 / 7 = 10x10x 50-40 / 1 = 10x10x 57x 1 radius + cylinder / 1 = 10x10x 57x 1.3R / 1 = 10x10x 58x 35º + cylinder / 1 = 10x10x 58x 34º + 7.2R / 1 = 10x10x 56x 2R + 2R angled / 2 = 10x10x 50x 40º + cylinder / 2 = 10x10x 45x 60º + cylinder / 3 = 10x10x 40x 8,8R + 2,6R + 1,3R / 1 = 10x 10x 55º / 1 = 10x10x 1,75 radius / 1 = 10x10 x 2 female radius / 1 = 10x10x 1.3R + 3.8 radius / 1 = 10x10x 200/4 = 10x 10x 65x 30º ​​/ 1 = 10x10x 55x 1.25 radius 90º + 5 radius / 1 = 10x10x 100 with 1º P casseroles / 1 = 10x10x 90x 5 (1º P caz.) + cyl. / 1 = 10x10x150x 45º / 1,5r. + 50º / 1,5 radius /
 1 = 12x12x 105x 2 radius + 1 radius / 1 = 14x14x 54x 11.3 clin / 2 = 16x16 x sharp point / 1 = 20x20 x 200.

2.8 -Tools for cutting and threading in Co 8%: 9 = 30x5 x 132/40 Impero / 1 = 23x3x 128/9 = 19x3x 90/30 length / 1 = 13x1.6x 100 mm. / 1- Thread count comb W- 55º / 1- Thread count comb M-60º.

2.9- Knurling tools: 1- Support 16x16x 110 / 3- Knurls Ø20 x 8 x 1,5-R / 3- Knurls Ø20x8x1-R.

2.10 - Drill holder: 1- Morse taper nº 5 from 3 to Ø 16mm / 1- Morse taper nº4 from 3 to Ø16mm / 1- With morse taper nº 3 from 3 to Ø16mm / 1- For drills from 0 to Ø 6mm, with Ø12 handle (clamp).

2.11 - Morse reduction cones with drag nipples: 5-Reducers from # 5 to # 4 female / 1-Reducer from # 5 to # 3 female / 4- Reducers from # 4 to # 3 female / 3-Reducers # 3 to # 2/1-Morse # 2 .

2.12 - Lathe points and counter points: 1- Rotating point with morse nº5 + point with angles of 30º-60º / 1-Rotating horn Ø80x 60º with morse nº3 + 1 bush nº 4/1-76 horn of Ø120 / Ø53 head axis / 2 -60º rotating points, with morse nº4 and nº5 / 1- Rotating point (Pertega without bearing) / 1- 80º fixed point with morse nº4 and teat / 1- Morse fixed point nº5 with 60º carbide tip / 2-60º fixed points and 80º with morse nº4 / 2- Fixed points 60º with morse nº5 / 5- Fixed points 60º mooring to the plate / 1-Ø22 x 125 x 80º fixed point / 1- 60º fixed point, special length (plates) / 1- Morse cone nº6 for lathe head shafts, with Ø50mm centering ring.

2.13 - Winch drag dogs: 1- Up to Ø135mm / 1- Up to Ø89mm / 1- Up to Ø66mm / 1- Up to Ø60mm / 1- Up to Ø39mm / 1- Up to Ø35mm / 1- Up to Ø20mm / 1- Up to Ø20mm / 1- Up to Ø18 mm.

2.14 - Male carrier drivers, thread on lathes: 1- Morse nº4 with 15mm square / 1-Morse nº4 with 18mm square / 1- Cone Ø49.5 x 23 with 30mm internal square / 1- Ø25 and Ø16 with 2 prisoners.
                                                                                                                                                        
2.15 - Metric taps tapping machine (Pass-INOX): 1- M: 36 x 1.75mm / 3- M: 30 x 2-IZ / 2- M: 30x 1.5 / 1- M: 24 x 3/1 - M: 24 x 2.5 / 1- M: 24 x 2 / 4- M: 24 x 1.5 / 1- M: 20 x 2.5 / 1- M: 20 x 1.5 / 1- M : 18 x 2,5 / 1- M: 18 x 1,5 / 1- M: 18 x 1 / 3- M: 16 x 2 / 1- M: 16 x 1,5 / 3- M: 14 x 2 / 5 - M: 12 x 1.75 / 1- M: 12 x 1 / 8- M: 10 x 1.5 / 1- M: 10 x 1.25 / 1- M: 10 x 1/3 - M : 8 x 1,25 / 7- M: 6 x 1/4 - M: 5/2 - M: 4/1 - M: 3.
1- M: 8 x 1.25 (Rolled) / Blind threads: 1- M: 16 + 3 - M: 12 + 4 - M: 10 + 2 - M: 8 + 1- M: 6 + 1- M: 5.
                                                                                                                       
2.16 - Whitworth taps and Gas for machine: 3 of ¾ ”Gas of Ø26.3 x 14h” / 1- 3/8 ”x 16h” / 2 - ½ ”x 12h” -IZ / 1 - ½ ”x 13h” / 1- 3/8 ”Gas x 19h” / 1- ¼ ”Gas x 19h” / 2- Males (1st and 3rd) ¼ ”Gas x 19h” / 2- 1/8 ”Gas x 28h” (Interns) / 2 - 1/8 ”Gas x 28h” (Blind) / 1 - PG-9 (Electric) / 1- 5/16 ”x 18h” / 1 - 3/16 ”x 24h” / 3 of 1 ¾ ”Gas x 11h ”/ 1- Glass 1 ¾” Gas x 11h ”special handle Ø25 x 250mm (Detachable).
                                                                                                      
2.17 - Boxes of 3 metric males for hand: 1- Box M: 30 x 3.5 / 2- Male M: ​​24 x 3 / 2- Male M: ​​24 x 2 / 1- Box M: 24 x 3 (Bronze only ) / 1- Box M: 22 x 2.5 / 2- Male M: ​​22 x 1.5 / 1- Male M: ​​18 x 2.5 / 1- Box M: 16 x 2 / 1- Male M: ​​16x 1,5 / 1- Box M: 16 x 2-IZ / 1- Box M: 12 x 1,5 / 1- Box M: 12 x 1,25 / 1- Box M: 12 x 1 / 1- Box M : 10 x 1.5 / 1-Box M: 10 x 1 / 1- Box M: 10 x 1.5-IZ / 1- Box M: 8 x 1.25 / 1- Box M: 8 x 1.
** 3 Whitworth male boxes for hand: 2- ½ ”x 12h” boxes / 2- ½ ”x 20h” boxes (electrical fittings).

2.18 - Metric thread dies: 1- M: 30 x 3.5 / 1- M: 30 x 2 / 3- M: 30 x 1.5 / 1- M: 24 x 3 / 1- M: 24 x 1, 5 / 2- M: 20 x 2.5 / 1- M: 18 x 2.5 / 1- M: 18 x 1.5 / 2- M: 16 x 2 / 1- M: 16 x 2-IZ / 1- M: 14 x 2 / 1- M: 14 x 1,5 / 2- M: 12 x 1,75 / 1- M: 12 x 1,25 / 1- M: 12 x 1 / 3- M: 10 x 1,5 / 1- M: 10 x 1,25 / 1- M: 10 x 1 / 1- M: 8x 1,25 / 1- M: 8 x 1 / 1- M: 6 x 1 mm pitch .
Whitworth threaded dies: 2 - Ø26 x 14h ”/ 1- 5/8” / 1- ½ ”- IZ / 1- 3/8” / 1- ¼ ”Gas / 1- 1/8” G.
                                                                                                     
2.18.1 - A die holder head for lathes: 1- Morse cone nº4 with automatic clutch, for dies up to Ø 65mm, has 4 reducing bushings for dies of Ø55 / Ø45 / Ø 38 and Ø 25mm.
                                                                                                                                                      
2.19 - TADU-EN 1.5m lathe between points, characteristics and equipment: It is equipped with a 10-CV motor provided with a mechanical clutch-brake, tempered and protected benches, with a large neckline and in good condition. Equip both cars with dimension readers for centesimal spindles. It has a TDG- Ø250 plate, 2 keys and 2 sets of claws: 1-Hard exterior + 1- hard interior. Equip 1- Plate Ø390 with 4 independent centering claws for exterior / interior. It is equipped with Impero quick change turrets, with all its tools and accessories. Keys: 2 = 42 flat / Angled star: 1 = 26/1 = 15/1 = 10/2 = 7. Plus the following special equipment:

2.19.1 - Turrets of the Impero lathe in TADU-EN:
** One 27x 5mm trapezoidal blade cutting turret / ** One universal SB / T.16 turret.
** Three turrets for adjustable anvils Ø16- SU / T.16 / ** One cutting turret, 23x 3mm blade. / ** A universal turret with 90º support SB1 / T.16.

2.19.2 - Special equipment and TADU-EN plates
** A fixed window with 3 adjustable supports.
** A mobile steady rest with 2 adjustable supports.
** A Ø535mm flat clamping plate, attached to the TDG-250 without claws.
** A flat flange plate Ø350mm.
** One Ø470x Ø30x 11 disc (Clamping plate).
** One Ø470x Ø315x 12 disc (Disc to clamp several).
** Sprockets for threading: 1 = 127-Z / 1 = 89-Z / 1 = 80-Z / 2 = 76-Z / 1 = 63-Z / 1 = 60-Z / 1-bolt / 1-Thread index .

2.20 - A rectifying box for lathes turrets, 0.5HP / 2840 r.p.m. + Tools:
** A stone holder for grinding 180 x Ø10mm.
** A 110 x Ø6mm grinding stone holder.
** A stone carrying sleeve, with Ø33 stone incorporated.
** One supplement Ø130x Ø70x 29 + One supplement Ø120x Ø63x 9.5 + One supplement Ø91x Ø52x19 + One supplement Ø60x Ø40x 30 + One supplement Ø60x Ø25x 30 with pocket Ø40x Ø25x 4.
** One Ø158 aluminum pulley + One pulley with 2 grooves Ø118 and Ø101 + One pulley with 2 grooves Ø86 / Ø75.
** One Ø 44x 5 pulley + Two protection shells.
Abrasives: 1- Glass Ø126x 50 / 1- Glass Ø150x35 with support Ø25x50 / 1- Glass Ø38x Ø28.5x Ø10x 27 / 1- Ø61x 20 x 4th handle Ø20x81 / 1- Ø 75x 15 handle Ø25x132.


Please note that this description may have been translated automatically. Contact us for further information.

How does Exapro work?

Using Exapro is super easy, here is how it works

Here is a selection of similar machines

Share

Contact the seller